How to cite this paper
Shihab, S., Khan, N., Myla, P., Upadhyay, S., Khan, Z & Siddiquee, A. (2018). Application of MOORA method for multi optimization of GMAW process parameters in stain-less steel cladding.Management Science Letters , 8(4), 241-246.
Refrences
Achebo, J., & Odinikuku, W. (2015). Optimization of Gas Metal Arc Welding Process Parameters Using Standard Deviation (SDV) and Multi-Objective Optimization on the Basis of Ratio Analysis (MOORA). Journal of Minerals and Materials Characterization and Engineering, 03(04), 298-308.
Akramifard, H., Mirzadeh, H., & Parsa, M. (2014). Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: Mechanism, microstructure, and mechanical properties. Materials Science and Engineering: A, 613, 232-239.
Balasubramanian, M. (2016). Prediction of optimum weld pool geometry of PCTIG welded titanium al-loy using statistical design. Engineering Science and Technology, An International Journal, 19(1), 15-21.
Bidi, L., Le Masson, P., Cicala, E., & Primault, C. (2017). Experimental design method to the weld bead geometry optimization for hybrid laser-MAG welding in a narrow chamfer configuration. Optics & Laser Technology, 89, 114-125.
Brauers, W., Zavadskas, E., Peldschus, F., & Turskis, Z. (2008). Multi-objective optimization of road design alternatives with an application of the MOORA method. Transport, 23(3), 183-193.
Cao, X., Ding, X., Lu, Y., Zhu, P., & Shoji, T. (2015). Influences of Cr content and PWHT on micro-structure and oxidation behavior of stainless steel weld overlay cladding materials in high tempera-ture water. Journal of Nuclear Materials, 467, 32-41.
Chakraborty, S. (2010). Applications of the MOORA method for decision making in manufacturing en-vironment. The International Journal of Advanced Manufacturing Technology, 54(9-12), 1155-1166.
Dhib, Z., Guermazi, N., Gaspérini, M., & Haddar, N. (2016). Cladding of low-carbon steel to austenitic stainless steel by hot-roll bonding: Microstructure and mechanical properties before and after weld-ing. Materials Science and Engineering: A, 656, 130-141.
Gadakh, V., Shinde, V., & Khemnar, N. (2013). Optimization of welding process parameters using MOORA method. The International Journal of Advanced Manufacturing Technology, 69(9-12), 2031-2039.
Luo, K., Jing, X., Sheng, J., Sun, G., Yan, Z., & Lu, J. (2016). Characterization and analyses on micro-hardness, residual stress and microstructure in laser cladding coating of 316L stainless steel subjected to massive LSP treatment. Journal of Alloys And Compounds, 673, 158-169.
Martinez-Conesa, E., Egea, J., Miguel, V., Toledo, C., & Meseguer-Valdenebro, J. (2017). Optimization of geometric parameters in a welded joint through response surface methodology. Construction and Building Materials, 154, 105-114.
Palani, P., & Murugan, N. (2007). Optimization of weld bead geometry for stainless steel claddings de-posited by FCAW. Journal of Materials Processing Technology, 190(1-3), 291-299.
Patel, J., & Maniya, K. (2015). Application of AHP/MOORA Method to Select Wire Cut Electrical Dis-charge Machining Process Parameter to Cut EN31 Alloys Steel with Brasswire. Materials Today: Pro-ceedings, 2(4-5), 2496-2503.
Scotti, A., Ponomarev, V., & Lucas, W. (2014). Interchangeable metal transfer phenomenon in GMA welding: Features, mechanisms, classification. Journal of Materials Processing Technology, 214(11), 2488-2496.
Shihab, S., & Chanda, A. (2015). Multi response optimization of milling process parameters using moora method. International Journal of Mechanical and Production Engineering, 3(4), 67-71.
Zhang, H., Chang, Q., Liu, J., Lu, H., Wu, H., & Feng, J. (2014). A novel rotating wire GMAW process to change fusion zone shape and microstructure of mild steel. Materials Letters, 123, 101-103.
Akramifard, H., Mirzadeh, H., & Parsa, M. (2014). Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: Mechanism, microstructure, and mechanical properties. Materials Science and Engineering: A, 613, 232-239.
Balasubramanian, M. (2016). Prediction of optimum weld pool geometry of PCTIG welded titanium al-loy using statistical design. Engineering Science and Technology, An International Journal, 19(1), 15-21.
Bidi, L., Le Masson, P., Cicala, E., & Primault, C. (2017). Experimental design method to the weld bead geometry optimization for hybrid laser-MAG welding in a narrow chamfer configuration. Optics & Laser Technology, 89, 114-125.
Brauers, W., Zavadskas, E., Peldschus, F., & Turskis, Z. (2008). Multi-objective optimization of road design alternatives with an application of the MOORA method. Transport, 23(3), 183-193.
Cao, X., Ding, X., Lu, Y., Zhu, P., & Shoji, T. (2015). Influences of Cr content and PWHT on micro-structure and oxidation behavior of stainless steel weld overlay cladding materials in high tempera-ture water. Journal of Nuclear Materials, 467, 32-41.
Chakraborty, S. (2010). Applications of the MOORA method for decision making in manufacturing en-vironment. The International Journal of Advanced Manufacturing Technology, 54(9-12), 1155-1166.
Dhib, Z., Guermazi, N., Gaspérini, M., & Haddar, N. (2016). Cladding of low-carbon steel to austenitic stainless steel by hot-roll bonding: Microstructure and mechanical properties before and after weld-ing. Materials Science and Engineering: A, 656, 130-141.
Gadakh, V., Shinde, V., & Khemnar, N. (2013). Optimization of welding process parameters using MOORA method. The International Journal of Advanced Manufacturing Technology, 69(9-12), 2031-2039.
Luo, K., Jing, X., Sheng, J., Sun, G., Yan, Z., & Lu, J. (2016). Characterization and analyses on micro-hardness, residual stress and microstructure in laser cladding coating of 316L stainless steel subjected to massive LSP treatment. Journal of Alloys And Compounds, 673, 158-169.
Martinez-Conesa, E., Egea, J., Miguel, V., Toledo, C., & Meseguer-Valdenebro, J. (2017). Optimization of geometric parameters in a welded joint through response surface methodology. Construction and Building Materials, 154, 105-114.
Palani, P., & Murugan, N. (2007). Optimization of weld bead geometry for stainless steel claddings de-posited by FCAW. Journal of Materials Processing Technology, 190(1-3), 291-299.
Patel, J., & Maniya, K. (2015). Application of AHP/MOORA Method to Select Wire Cut Electrical Dis-charge Machining Process Parameter to Cut EN31 Alloys Steel with Brasswire. Materials Today: Pro-ceedings, 2(4-5), 2496-2503.
Scotti, A., Ponomarev, V., & Lucas, W. (2014). Interchangeable metal transfer phenomenon in GMA welding: Features, mechanisms, classification. Journal of Materials Processing Technology, 214(11), 2488-2496.
Shihab, S., & Chanda, A. (2015). Multi response optimization of milling process parameters using moora method. International Journal of Mechanical and Production Engineering, 3(4), 67-71.
Zhang, H., Chang, Q., Liu, J., Lu, H., Wu, H., & Feng, J. (2014). A novel rotating wire GMAW process to change fusion zone shape and microstructure of mild steel. Materials Letters, 123, 101-103.