The derivatives of 2,6-dihydroxyacetophenone[4]arene were synthesized via one-step in the presence of base catalyzed cyclocondensation reaction of equimolar volumes of different aliphatic aldehydes and 2,6-dihydroxyacetophenone. All the compounds were purified by column chromatography and characterized by ¹H-NMR Spectroscopy, ¹³C-NMR Spectroscopy, IR Spectroscopy, and Mass spectrometry techniques. The compounds were provided with good yield and can be successfully useful for various amino acid detection because of the four ketone groups in 2,6-Dihydroxyaceto-phenone[4]arene were able to react with the amino group of amino acid to give a stable product formation. It was caused by the intermolecular hydrogen bonded between the two groups, ketone and carboxylic group of amino acid. This recognition of amino acid was carried out in UV-vis spectroscopic technique.

India has turned out to be one of the most favorite destinations for the patients who want to undertake cost effective medical care for various medical problems and who have infuriated from the long waiting lists for medical and diagnostic procedures in their home countries. This research aims to analyze different factors along with their intensity affecting medical tourism industry in a developing country like India so that managers and policymakers can take better decisions which will help in growth & promotion of Indian health tourism market. The study has been done by performing a cross-sectional survey within major hospitals in India and exploratory factor analysis and graph theory and matrix approach have been used to evaluate the intensity of variables affecting Indian medical tourism sector. Nineteen variables have been identified through review of literature, and four factors have been extracted including cost, quality of treatment and care, availability of experts, competitive advantage and political, legal and visa related factors. With the understanding of the intensity of different variables suitable precautions can be taken by the healthcare managers so that these variables can be handled very carefully.

Traditional project management methods have been used for many years in the implementation and management of projects. With the publication of the agile manifesto in 2001, the interest in agile methods increased and successful results were obtained in the execution and solution of complex projects with agile approaches. Agile approach consists of different structures that can be named as framework or method. Among these agile methods, which are selected and applied according to the suitability and purpose of the project, the most frequently preferred one is SCRUM. In this study, SCRUM, an agile project management technique that has been used frequently in recent years in order to develop a flexible project management process, has been examined, and the effectiveness of the events of the SCRUM technique in minimizing the risks that arise in project management has been evaluated. Determining the effectiveness of these SCRUM events, which each agile project team implements in turn, is very important for the correct and effective allocation of resources. For this purpose, a multi-criteria decision-making model has been proposed to evaluate the effectiveness of 4 SCRUM events within the scope of this study. While the importance weights of the 24 project management risk factors proposed in the solution phase of the created model were determined by the SWARA method, the SCRUM events were evaluated with the WASPAS, COPRAS and EDAS methods and the solution values found by three different methods were compared.

In the domain of international construction projects, managing supply chains presents distinct challenges due to the intricate task of coordinating multiple stakeholders within diverse cultural, economic, and regulatory contexts. Prior research highlights the significance of incentive mechanisms and collaborative procurement practices, yet the effectiveness of these strategies in augmenting performance for international projects has not been extensively examined. This investigation explores the effects of financial and non-financial incentives on the performance of global construction projects, with a focus on the mediating role of cooperation. Data were gathered from Chinese international contractors and local suppliers and subsequently analyzed using Structural Equation Modeling. The results reveal two separate pathways of influence. Firstly, financial incentives exhibited substantial direct and indirect impacts on project performance; secondly, while non-financial incentives did not directly affect project performance, they significantly impacted cooperation levels, which in turn mediated the relationship between non-financial incentives and project performance. This study provides essential perspectives for managing international construction projects, emphasizing the critical need for the combined application of financial and non-financial incentives to foster cooperation and ultimately achieve superior project outcomes.

Gas Metal Arc Welding (GMAW) is widely used to perform cladding so as to enhance corrosion resistance and several other properties of substrate material. However, the success of cladding us-ing GMAW depends on the optimal selection of its critical parameters. Therefore, in this study, the cladding of stainless steel over mild steel substrate using GMAW process is investigated with an aim to optimize the GMAW process parameters. Three GMAW process parameters i.e. current, voltage, and torch angle were selected and their effect on the time required to complete the cladding and arc power was investigated and optimized. Multiple objective optimization based on ratio anal-ysis (MOORA) method was employed to evaluate and optimize the effect of the selected process parameters. It was found that the current and voltage have significant effect in reducing the time and power required for the cladding process.

In this paper, the authors aim to analyse organisational intention and focus on hybrid project management (HPM) methodology adoption in FinTech system software development. It is important to ascertain the internal and external factors that affect organisational decision-makers’ intentions towards HPM adoption. This study aims to apply a theoretical approach integrating Technology-Organisation-Environment (TOE), which examines the factors that impact FinTech organisations’ decisions to adopt HPM into their software development projects, together with the Theory of Planned Behaviour (TPB) which examines the behavioural intention. It addresses those factors that form organisational decision-makers’ readiness for HPM implementation and enable their intention to use it. When combining the independent, dependent, and moderating variables, the results show that the effect of relative advantage, top management support, and industry pressure have a positive influence on individual’s attitude towards HPM adoption in FinTech Malaysia and sustainability in Quality 4.0. The authors also considered the influence of attitudes and perceived behavioural control variables having a positive influence on sustainable intention of HPM adoption in the FinTech industry. Partial Least Squares Structural Equation Modelling (PLS-SEM) was used to verify the proposed hypotheses, with the exception of the direct influence of top management support or attitude on intention to adopt.

The success of building construction projects in developing countries heavily relies on the specialized skills of artisans who are responsible for executing physical construction activities. However, the performance of these artisans depends on various influencing factors (IFs) that significantly affect their productivity and workmanship. This study aims to assess the impact of disregarding IFs on the performance of artisans in building construction projects in Tanzania. Using the individual performance theory, the study identifies the core IFs that influence artisans' performance and develops a structural equation modelling (SEM) to understand the inter-relationship between these IFs. The study collects data from 289 building construction projects through a non-probability technique and analyses it using SPSS-25 and AMOS-20. The study finds that the enforcement of IFs at construction sites by stakeholders in the construction industry is weak, which undermines the performance of artisans. Therefore, the study recommends that employers and supervisors should consider IFs during the construction process to achieve better results in terms of time, cost, and quality. The findings of this study can guide employers and supervisors in the construction industry to enhance the overall performance of building construction projects by improving the performance of artisans through ensuring that IFs are taken into consideration during the recruitment and construction process.

Loosening of threaded joints, especially those operating under dynamic loading conditions, is a common and traditional problem for machines, mechanisms and structures. This study develops scientific approaches to the frictional lock of bolted joints to prevent unintentional self-unscrewing. An analytical version of the theory of threaded joint, which is equipped with a spring-loaded collet, is developed in the paper. The mixed contact problem of the interaction of the cyclic-symmetric system of the collet nut blades with the inner bolt and the outer spring, which is fitted with tightness, was set up and solved. In order to obtain analytical solutions to the problem, original one-dimensional models of structural elements of the connection were constructed. Based on the solutions of the contact problem, the moment of friction force is calculated from the initial gap between the blades and the thread, from the value of the spring tightness, from the parameters of the rigidity of the blade and the clamping spring. Finally, the value of the maximum friction torque that counteracts the self-unscrewing of the collet nut is evaluated, and some features of the threaded joint with the collet nut design are considered.

In this paper, experimental and numerical studies are performed to determine the maximum deflection and strength of cylindrical shells. The considered models are subjected to concentrated loads applied progressively until plastic failure of the structures. In order to determine the effect of the geometrical parameters, several models with different thicknesses, lengths, and radius are considered and analysed with various boundary conditions. The numerical analysis is carried out by the finite element method using ABAQUS code. The main objective of the present investigation is to determine the maximum strength that caused damage of the models. The results of the experimental and numerical analysis are recorded, discussed and commented on. It is observed that the thickness, length,and radius dimensions with boundary conditions have great effect on the strength load values that create damage.

In this study, an improved eight-node quadrilateral finite element based on a twice-interpolation strategy (TIS) is given for correctly modeling the singular stress field near 2D crack tip of structures. In present approach, the approximation functions for interpolation strategy are established by using the TIS which included nodal values as well as averaged nodal gradients respectively. The stress intensity factors (SIFs) are therefore calculated following the proposed method. The accuracy of the proposed element and its numerical solutions are described by several examples.