In the present work the synthesis of 4-phenyl-2, 6-di (thiazol-2-yl) pyridine copper chloride (abbreviated as Cu-DTPy) complex using copper (II) chloride and 2, 6-di (thiazol-2-yl) pyridine has been carried out. The complex has been specified by UV-Vis, FT-IR, CHNS and ESI-MS methods of analysis. The synthesized copper complex has been used as catalyst in the oxidation of p-aminophenol using hexacyanoferrate (III) ions as an oxidant in aqueous alkaline medium by kinetic-spectrophotometric method. This experimental work was carried out at optimum pH 11.0 and temperature 25ºC. The variation of effect of concentration of p-aminophenol (abbreviated as PAP), hexacyanoferrate (III) ions, and Cu-DTPy catalyst on reaction rate has been studied. Thermodynamic parameters such as free energy of activation, activation energy, enthalpy and frequency factor have been evaluated with the change in rate of the reaction at four disparate temperatures i.e. 25-40ᵒC. The oxidation products have been identified by FT-IR and ESI-MS spectroscopic analytical techniques. The major product of this reaction is NN’-bis-(p-hydroxyphenyl)-2-hydroxy-5-amino-1,4-benzoquinone di-imine. Thus, this method is highly efficient and environmentally safe to remove PAP from polluted water resources.

A review of the literature, multiple authors in order to systematize information on the effect of temperature in the range of 25-42 ° C on blood proteins, to conduct further studies of the effect of temperature on the stability of fibrinogen molecules in aqueous solution. Study of works on the determination of conformation and stability of protein molecules in the temperature range of living organisms.

The soil type and temperature are considered important parameters that can influence the rates and equilibria of different environmental processes. Therefore, the adsorption and desorption isotherms of fipronil in clay loam, clay, sandy loam, sandy clay loam, sand and loamy sand soils at 25 and 50˚C was studied. The amount of fipronil adsorbed and desorbed by different soils was significantly influenced by the temperature. Adsorption was higher in clay loam, clay, sandy clay loam and sandy soil at 25°C, while sand soil and loamy sand soil at 50°C. The non-desorbed amount was greater at 25°C in different types of soil except for clay loam soil. The negative ΔG˚ indicated that the adsorption/desorption in different types of soil was spontaneous at different temperatures. The value of standard enthalpy change (ΔH˚) was positive in clay soil, sandy loam soil, sandy clay loam soil and loamy sand soil for adsorption and sandy loam soil, sand soil and loamy sand soil for desorption. Moreover, the standard entropy change (ΔS˚) was negative in soils for adsorption and desorption isotherms except clay loam soil. Adsorption and desorption isotherms trends as well as the values of the correlation coefficients indicated that the adsorption and desorption isotherms of fipronil in tested soils were fitted to the Freundlich model because the correlation coefficient is very close to 0.999.

In Egypt, the request for salt fish products has been increasing during many feasts because it is one of Egypt's favorite foods. It has been reported that in certain seasons, these products cause toxicity and even death. Most fish poisonings around the world are known to be caused by elevated histamine levels. Thus, the study assessed the histamine levels of herring and fesikh samples available on the market and established the safety of these products with recommendations for various treatments that may inhibit the production of histamine in herring and fesikh through bacteria and enzyme production. Before manufacturing herring and fesikh, the fresh fish is soaked for one hour in a modified pH solution of 4 by vinegar with the addition of natural substances individually or in combination (such as garlic, onion, hot pepper, or aloe vera) or some chemicals singly (such as edta, nisin, h2o2, formic acid, and so2). The levels of histamine in herring (111 to 138 mg/kg) and fesikh (214 to 279 mg/kg) were unsafe in marketable samples. The histamine levels of herring and fesikh in proposed treatments were safe since they did not exceed 26 mg/kg after 30 days of cold storage for herring or 45 mg/kg after maturity of fesikh. The proposed treatments enhanced greatly herring and fesikh organoleptic qualities, especially those containing natural ingredients, such as garlic, hot pepper, or their mixture beside onion, which are more accepted treatments.

The aim of this study was the investigation of how adsorbents made from Leucaena leucocephala (L. Leu) leaf and bark materials were effective in treating wastewater containing methyl red dye (MeReD). The functional groups in the phytochemical elements from the bark and leaves of L.Leu offer active surface sites and enable the adsorption mechanism. The investigations were done in batch mode. Contact time, adsorbent dose concentration, temperature, pH, and initial MeReD concentration were all examined as significant parameters impacting the sorption process. The study found that significant MeReD removal efficiency was achieved after 90 min of contact time, pH 4.0 units, 1.2 gm/L adsorbent dose concentration, 100 ppm initial MeReD quantity, and 30 oC temperature. The developed adsorbents were applied to samples gathered from dye companies in Hyderabad and Guntur. The extraction of MeReD (81.2% to 90.0%) from untreated wastewater contaminated with MeReD using developed adsorbents was very efficient.

Single crystal X-ray diffraction is the only experimental technique available to elucidate the complete three-dimensional structure of the samples at molecular and atomic levels. But this technique demands defect-free single crystals. Growing good quality single crystals which are suitable to collect X-ray intensity data is an art rather than science. Among the various crystal growth methods, the most effective and commonly used is the slow evaporation method. Using this method, defect-free single crystals of the ground mixture of gallic acid (GA) and butyramide (BU) taken in a 1:1 molar ratio are obtained. The compound was subjected to experimental characterizations like; PXRD, FTIR, SCXRD, and TGA. Further, these results were utilized in the computational characterizations namely, Hirshfeld surface analysis, interaction energy calculations, DFT studies, and docking studies. Structural characterization revealed that the GA-BU compound was crystallized as a cocrystal hydrate with 2:1:1 stoichiometry in a monoclinic crystal system and P21/n space group. Structural studies exposed the presence of various inter and intramolecular hydrogen bond interactions, ring synthons, DDAA environment of the water molecule, and π ... π stacking interactions. The contribution of the several close contacts to the crystal structure, the influence of different interaction energies in the packing, the HOMO-LUMO energy gap, and the location of reactive sites were realized through computational studies. Further, a molecular docking study has been performed to check the antiviral activity of the title compound against COVID-19.

A series of isoxazole derivatives, 3-aryl-5-[5-(4-nitrophenyl)-2-furyl]-2,3-dihydroisoxazoles (5a-j) were synthesized by cyclocondensation reaction between 1-aryl-3-[5-(4-nitrophenyl)-2-furyl]prop-2-en-1-ones (4a-j) and hydroxylamine hydrochloride in presence of sodium acetate in glacial acetic acid at reflux temperature. Formerly, compounds (4a-j) were synthesized by the condensation of 5-(4-nitrophenyl) furan-2-carbaldehyde (3) with various aromatic ketones by using alkali as catalyst. The structures of the synthesized various isoxazole have been characterized by using elemental analysis, Infrared,¹H-NMR spectroscopy and further supported by Mass spectroscopy. All the products have been screened for their in-vitro biological assay like antibacterial activity towards Gram-positive and Gram-negative bacterial strains and antifungal activity towards Aspergillus niger at a concentration of 40 µg/ml. It was exposed that the compounds 5a, 5c, 5e, 5f, and 5i showed inspiring antibacterial and antifungal activity compared to the used reference standard.

Flavanol compounds are chalcone derivatives, generally found in hydroxy substituted forms that can act as ligands. Hydroxy-substituted flavonols are found in many plants but in very small amounts. In order to enrich and expand the use of this compound as a ligand, the synthetic methods were carried out through structural variations, one of which was by substitution using chloride and then the compound (2-(4-chlorophenyl)-3-hydroxy-4H-chromene-4-one) was obtained. In this research, the study was conducted using the compound (2-(4-chlorophenyl)-3-hydroxy-4H-chromene-4-one) as a ligand for complex formation with copper (II). From the results of the study, the mole ratio of the ligand with copper (II) metal was 2:1, pH 7.01 with a complex stability time of 15-25 minutes. The complex formed is bright yellow in color and soluble in chloroform. From the characterization of the resulted complex, it was appeared that Cu-flavonol chloride with UV-Vis spectrophotometer showed maximum absorption at wavelengths 273 and 429 indicating the presence of benzoyl and cinnamoyl peaks, with FT-IR showing the wave number 1545cm-1 indicating the presence of Cu=O-Cu bonds and absorption at 682 cm-1 indicating the presence of Cu-O bonds.

Increasing the yield and nutritional value of faba beans is one of the main objectives of the common bean cultivar improvement programs due to its contribution to terminate protein deficiency malnutrition in developing countries and raising the income level of smallholder farmers. In this study, the technological quality of bean seeds from twenty-four genotypes were evaluated (twenty germplasm and four improved cultivars (Misr 1, Giza 429, Giza 716, Giza 843). The results showed a significant diversity in the Egyptian bean germplasm in their quality traits compared to the control cultivars and indicated that the genotypes had a high hydration coefficient that ranged between (98.6-112.4%). While most of the genotypes for cotyledons to hull ratio met the commercial criteria that ranged between (7.41-6.41%). Twenty genotypes had the highest total soluble solids (6.90-11.78%) and were superior to the control cultivars. The seeds chemical composition analysis showed that the genotypes differed in their composition such as protein (26.65 to 30.72 %.), carbohydrate (58.00 to 62.25%), tannin (70.67 to 157.45%), phenols (35.23-51.02 %), and moisture (9.15 to 10.45%).

The chitosan-coated neem flower powder was prepared and employed as an adsorbent for the removal of cationic methylene blue from an aqueous medium. The interaction of chitosan with neem flower was concluded by FTIR. The BET surface area was evaluated for the prepared NFC adsorbent. The adsorption of methylene blue dye onto chitosan-coated neem flower powder (bio-adsorbent) was carried out by varying the concentration of dye, pH, temperature and concentration of adsorbent. The adsorption capacity was evaluated by using Freundlich and Langmuir models. The adsorption data were further analysed with the help of pseudo-first and second-order kinetic models. The thermodynamic parameters were evaluated to comprehend the nature of the adsorption process.