Nickel based bimetallic nanocrystals, iridium-nickel play an imperative role in catalysis, electrocatalysis, and magnetic applications. In the present work Ir-Ni bimetallic nanoalloys were synthesized by modified polyol reduction method with different cationic, anionic, and non-ionic surface active agents like CTAB, SDS, TSC, and PVP. The non-ionic surface active agent PVP produced a better effect on nanoparticle size than cationic and anionic surfactants. The synthesized bimetallic nanocrystals were characterized by UV-Vis, XRD, FTIR, FESEM, and HRTEM techniques. XRD and FTIR verify the nature of synthesized bimetallic nanocrystals and the interaction between stabilizers and nanoparticles. HRTEM studies reveal that the PVP stabilized Ir-Ni (3:1) and Ir-Ni (1:1) bimetallic nanocrystals are small in size and less dispersed. Particle size range of these nanoparticles is from (1.77-2.36) nm. FESEM images show that nanoparticles are in quasi spherical shape. EDX analysis indicates that the resultant particles are core shell structure with Ni core and Ir shell.

Different metal catalysts have been tested for the one-pot transformation of carbonyl compounds, amines and phosphites to α-aminophosphonates. The influence of catalyst type, amount, solvent and the substrate electronic factor have been investigated. The results revealed that the carbonyl compounds could be smoothly converted into α-aminophosphonates at room temperature in good to excellent yields, with or without solvent in a reasonable reaction time. These results suggested that among others, lithium perchlorate and metal triflates were proven to be effective catalysts in 10 moles % catalysts. Polar aprotic solvents proved to be the best for the synthesis of α-aminophosphonates. The synthesized compounds' structure characterizations were elucidated by different spectroscopic tools and showed results consistent with the expected structures.

Plant-mediated green synthesis of metallic nanoparticles (NPs) has become the most deserving alternative to chemical synthesis as this process is economical and energy-efficient, and environmentally benign. For the last twenty to thirty years, different plant sources are being utilized for the fabrication of green NPs, and few of them have used the extract of Phoenix Dactylifera L. as reducing, capping, or stabilizing agents. This review provides a detailed outline of the extraction method from various parts of dates and their synthesis with different metal salts using these extracts. The applied techniques of characterization and application of these nanoparticles have also been thoroughly discussed. The phytochemicals present in the extract were responsible for reducing the metals. Except for a few, all the investigations reported the spherical NPs but have variations in their size. These NPs have high prospects in applications such as antimicrobial, anticancer, antioxidant, and catalytic activities. This work may lead the path for additional advancement in this field, and researchers may take up the future work for the large scale production of NPs and their application using date extracts.

Starting from 3-cyano-4,6-distyrylpyridin-2(1H)-thione (1), the compound N-(4-chlorophenyl)-2-((3-cyano-4,6-distyrylpyridin-2-yl)thio)acetamide (2) was prepared. Compound (2) underwent cyclization upon heating in ethanolic sodium ethoxide solution to give the corresponding cyclized form 3-amino-N-(4-chlorophenyl)-4,6-distyrylthieno[2,3-b]pyridine-2-carboxamide (3). The elemental analyses and spectroscopic data of compounds (2) and (3) are in agreement with their proposed structures. Their insecticidal activity against cowpea aphid, Aphis craccivora Koch, was studied. The results of insecticidal activity for compounds (2) and (3) against the nymphs and the adults of the tested insects exhibited that compounds (2) and (3) have a higher insecticidal activity than that of acetamiprid, a reference insecticide, after 24 h of treatment.

The novel class of multi-substituted indolylimidazole derivatives series substituted 3-(4,5-diphenyl-1H-imidazol-2-yl)-1H-indole and substituted 5-bromo-3-(4,5-diphenyl-1H-imidazol-2-yl)-1H-indole was synthesized utilising a green and efficient one-pot four components condensation of indole-3-carbaldehyde, benzil, ammonium acetate and various amines under microwave irradiation using Amberlyst A-15 as a recyclable catalyst. The catalyst Amberlyst A-15 has recovered from the reaction mixture and reused repeatedly for the next reaction. The key advantage of this process involves eco-friendly, very short reaction time, cost-effectiveness with the reusability of catalyst, easy workup, and purification of the product with excellent yields. FTIR, 1HNMR and Mass spectrometric studies analyzed and established the structures of all newly synthesized compounds.

In the present work, the polymerization of limonene oxide (LO) catalyzed by Maghnite H⁺ (Mag- H⁺) is investigated. Mag-H⁺ is Algerian montmorillonite sheet silicate clay exchanged with protons. The poly limonene oxide (PLO) is obtained by cationic ring opening polymerization in bulk and with solvent. The effect of the reaction time, the temperature and the amount of catalyst are studied and discussed in order to find the optimal reactions conditions. The polymerization in solution at 0 °C with 5% by weight of catalyst leads to the best yield 61.34% for a reaction time of 1h. The structure of the obtained products is characterized by XRD, ¹H-NMR, ¹³C-RMN, ATR-FTIR, DSC and TGA.

Due to the new hopes for treatment of multiple sclerosis (MS) diseases by Teriflunomide (TFN), in this project, a cheap, robust, and fully validated method has been developed both for determination of assay content in API (active pharmaceutical ingredient), and for related impurities analysis (RIA). To operate the method, a common C18, end-capped (250 × 4.6) mm, 5µm liquid chromatography column, was applied. The mobile phase A was prepared by dissolving 2.74 g (20mM) of PDP (potassium dihydrogen phosphate) and 3.72 g (50mM) of PC (potassium chloride) in water (1000 mL). Then, pH was adjusted to 3.0 by adding OPA (ortho-phosphoric acid) 85%; while, the mobile phase B was acetonitrile (ACN) (100%). In order to confirm the experimental data about the λmax of TFN, we have used the Born-Oppenheimer molecular dynamics (BOMD) simulations, quantum mechanics (QM), and TD-DFT calculations. According to the results, the method showed a high level of suitability, specificity, linearity, accuracy, precision, repeatability, robustness, and reliable detection limit.

Due to the new hopes for treatment of multiple sclerosis (MS) diseases by Teriflunomide (TFN), in this project, a cheap, robust, and fully validated method has been developed both for determination of assay content in API (active pharmaceutical ingredient), and for related impurities analysis (RIA). To operate the method, a common C18, end-capped (250 × 4.6) mm, 5µm liquid chromatography column, was applied. The mobile phase A was prepared by dissolving 2.74 g (20mM) of PDP (potassium dihydrogen phosphate) and 3.72 g (50mM) of PC (potassium chloride) in water (1000 mL). Then, pH was adjusted to 3.0 by adding OPA (ortho-phosphoric acid) 85%; while, the mobile phase B was acetonitrile (ACN) (100%). In order to confirm the experimental data about the λmax of TFN, we have used the Born-Oppenheimer molecular dynamics (BOMD) simulations, quantum mechanics (QM), and TD-DFT calculations. According to the results, the method showed a high level of suitability, specificity, linearity, accuracy, precision, repeatability, robustness, and reliable detection limit.

A sequence of pyrano[2, 3-c]pyrazoles was constructed through promoting an eco-friendly, green, and efficient approach. M1-M25 derivatives were developed by a base-catalyzed one-pot reaction involving application of hydrazine hydrate 96%, β-keto ester as ethyl acetoacetate or diethyl malonate, aryl/heteroaryl aldehyde or isatin, and enolizable active methylene compounds with isolation of unexpected compound M2. Further on, intramolecular cyclization of compounds M10, M13 with formic acid, acetic anhydride, and formamide leads to the corresponding pyrimidine derivatives M26-M31. Afterwards, the antimicrobial activity of the compounds was evaluated and fortunately, the vast majority of the compounds showed outstanding anti-bacterial results. Besides, the potential mode of action of the synthesized compounds was determined by employing a molecular-docking study against penicillin-binding protein implicated in anti-bacterial action. Compound M21 was one of the most promising anti-bacterial agents with potential binding affinity against the penicillin-binding protein. This study shed light on novel compounds for further antimicrobial drug development.

Sulfonamides are a very good antibacterial agent that targets essential bacterial enzymes specifically DNA gyrase. The objective of the present work was to investigate the molecular docking of the (4-(tert-butyl)-N,N-diethylbenzenesulfonamide) with the DNA gyrase of S. aureus. The energy-free topoisomerase activity of the A subunit, which breaks the DNA, is inhibited by 4-quilones such as nalidixic acid and ciprofloxacin. The energy transducing activity of the B subunit is inhibited by novobiocin and other coumarin antibiotics. Single crystal X-ray diffractometer study was carried out to understand the structure, physical and chemical reactive parameters, the title compound is crystallized under monoclinic crystal system with the space group of P21/C. To understand the behaviour of the title compound in living organism, Absorption, Distribution, Metabolism, Excretion analysis was done using Swiss ADME and Osiris data warrior tool. Further, Toxicity of the title compound was predicted by using PKCSM online software.