In the present work, the polymerization of limonene oxide (LO) catalyzed by Maghnite H⁺ (Mag- H⁺) is investigated. Mag-H⁺ is Algerian montmorillonite sheet silicate clay exchanged with protons. The poly limonene oxide (PLO) is obtained by cationic ring opening polymerization in bulk and with solvent. The effect of the reaction time, the temperature and the amount of catalyst are studied and discussed in order to find the optimal reactions conditions. The polymerization in solution at 0 °C with 5% by weight of catalyst leads to the best yield 61.34% for a reaction time of 1h. The structure of the obtained products is characterized by XRD, ¹H-NMR, ¹³C-RMN, ATR-FTIR, DSC and TGA.

Loan Self Control (LSC) can be defined as the ability of self-control related to behavioral control, cognitive control, and decisional control in managing loans or debts for financial welfare. The study aims to determine the factors of loan self-control in Kredit Usaha Rakyat (KUR) banking customers of Micro Small Medium Enterprise (MSMEs) in Indonesia so that they can obtain three-time financing from banks. This study used 87 samples collected by purposive sampling technique. Primary data was collected using an online survey. Factor analysis formed 3 loan self-control factors, namely Behavioral control, Cognitive control and decisional control from 14 indicators tested.

Lots of work has been conducted to explore and explain inter-organizational relations between supply chain partners. However, we have noticed that there is no accurate agreement between authors. Therefore, to better understand this disparity, the authors have studied supply chain inter-organizational relationship dynamics in different industries to bring out an analytical framework that allows a better understanding of such an issue. Further, the framework is subjected to expert’s opinion and ranked using the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) approach. These case studies instruct professionals and researchers so that they bring up their level of abstraction that remains appropriate to catch this dynamic in order to guide decision-making and future research and studies.

An existing robust three dimensional finite element based on the strain approach is presented. This element is implemented, for the first time in the commercial computer code ABAQUS, by using the subroutine (UEL), for the static and dynamic analysis of isotropic plates, whatever thin or thick. It is Baptised SBH8 (Strain Based Hexahedral with 8 nodes) and has the advantage to overcome the problems involved in numerical locking, when the thickness of the plate tends towards the smallest values. The implementation is justified by the capacities broader than offers this code, especially, in the free frequencies computation. The results obtained by the present element are better than those given by elements used by ABAQUS code and the other elements found in the literature, having the same number of nodes.

The forming steps by permanent deformation controlled by the tools generate a distribution of stresses inside the material which directly depends on the work hardening properties of the latter. The change in boundary conditions following the removal of the tools imposes the material to redistribute the stresses in the sections in a manner compatible with the new boundary conditions. This new distribution necessarily operates by local elastic deformations that result globally in a general change of shape called springback. This geometrical deviation can be minimized by the meticulous focus of the tools, but it cannot generally be completely annihilated due to the influence of several parameters. For this reason, the study of the influence of the different technological factors and physico-metallurgical parameters on the springback for the different metals is very important to design and properly realize forming tools. The main objective of this work is to find solutions to problems encountered in sheet metal forming such as the problem of springback. Our work has two essential purposes: the first is summarized in an experimental study based on theoretical analyses. To this end, much effort is made to add a new design of parts for a U-type stretch-bending device and adapt it to a tensile testing machine. This design has the advantage of modifying and assembling all parameters affecting springback at the same time and also of carrying out several forming processes on the same device. The second goal is the experimental and numerical prediction of springback, and the study of the effect of various stretch-bending process parameters such as punch velocity, the orientation of the sheet (anisotropy), hold time and punch-die clearance on springback behavior under heat treatment of aluminum alloy sheets with three different rolling directions (0°,45°,90°). A finite element (FE) model of stretch-bending has been established by utilizing ABAQUS/CAE software. From this analysis, it can be concluded that the springback is affected by the anisotropy of the sheet and the heat treatment in the stretch-bending process. The obtained experimental results were compared with the numerical simulations found in good agreement.

The wear of cutting tools remains a major obstacle. The effects of wear are not only antagonistic at the lifespan and productivity, but also harmful with the surface quality. The present work deals with some machinability studies on flank wear, surface roughness, and lifespan in finish turning of AISI 304 stainless steel using multilayer Ti(C,N)/Al2O3/TiN coated carbide inserts. The machining experiments are conducted based on the response surface methodology (RSM). Combined effects of three cutting parameters, namely cutting speed, feed rate and cutting time on the two performance outputs (i.e. VB and Ra), and combined effects of two cutting parameters, namely cutting speed and feed rate on lifespan (T), are explored employing the analysis of variance (ANOVA). The relationship between the variables and the technological parameters is determined using a quadratic regression model and optimal cutting conditions for each performance level are established through desirability function approach (DFA) optimization. The results show that the flank wear is influenced principally by the cutting time and in the second level by the cutting speed. In addition, it is indicated that the cutting time is the dominant factor affecting workpiece surface roughness followed by feed rate, while lifespan is influenced by cutting speed. The optimum level of input parameters for composite desirability was found Vc1-f1-t1 for VB, Ra and Vc1-f1 for T, with a maximum percentage of error 6.38%.

Current optimization strategies are based on the increase the productivity and the quality with lower cost in short time. Grey relational analysis “GRA” based on Taguchi design was proposed in this paper for simultaneous improvement of surface quality and productivity. The turning trials based on mixed Taguchi L18 factorial plan were conducted under dry cutting conditions for the machining couple: AISI D3 steel/mixed ceramic inserts (CC650). The machining parameters taken into account during this study are as follow: major cutting edge angle (χr), cutting insert nose radius (r), cutting speed (Vc), feed rate (f), and depth of cut (ap). Significant effects of machining parameters and their interactions were evaluated by the analysis of variance. Through this analysis, it have been found clearly that feed rate and cutting insert nose radius had a big significant effects on surface quality while depth of cut, feed rate followed by cutting speed had a major effect on productivity. The mathematical relationship between the machining parameters and the performance characteristics was formulated by using a linear regression model with interactions. Optimal levels of parametric combination for achieving the higher surface quality with maximum productivity were selected by grey relational analysis which is based on the high value of grey relational grade. Confirmation experiments were carried out to prove the powerful improvement of experimental results and to validate the effectiveness of the multi-optimization technique applied in this paper.

This work is a contribution to the study of the rigidity of rotational friction welding of cylindrical specimens made on a parallel lathe. We performed welding of three combinations of parts: steel / steel, aluminium / aluminium and steel / aluminium according to three numbers of rotations of the spindle (900, 1250 and 1800 rpm). To control the rigidity and quality of these assemblies, tensile tests are used followed by ultrasonic testing to ensure that the tips are welded and that there are no internal defects. Hardness profile of the welded zone according to the welding parameters was obtained. Metallographic observations have detected the profile of the various zones welded and affected thermally. The results of the mechanical tests showed that a rotation speed of 1250 rpm can produce a very good weld, with other parameters kept constant.

The aim of this article is to study the impact of marketing innovation and the visual and verbal ele-ments of packaging on customers purchase intentions. After a brief literature review, an empirical study is conducted among 140 customers of Coca-Cola brand in Tlemcen city. To this end, a model of intention has been developed to be tested by structural equations modeling. The results of this study showed that marketing innovation and the visual and verbal elements of packaging directly affect the purchase intentions of the customers of this brand.

In this paper, experimental and numerical studies are performed to determine the maximum deflection and strength of cylindrical shells. The considered models are subjected to concentrated loads applied progressively until plastic failure of the structures. In order to determine the effect of the geometrical parameters, several models with different thicknesses, lengths, and radius are considered and analysed with various boundary conditions. The numerical analysis is carried out by the finite element method using ABAQUS code. The main objective of the present investigation is to determine the maximum strength that caused damage of the models. The results of the experimental and numerical analysis are recorded, discussed and commented on. It is observed that the thickness, length,and radius dimensions with boundary conditions have great effect on the strength load values that create damage.