Forecasting is an integral approach due to its ability to make informed act decisions and develop data-driven strategies. It's also used to make decisions related to current circumstances and predictions on future conditions. An integral part has been developed using visibility analysis for COVID-19 Outbreak, a lesson from Indonesia. The author identified that its topic has limited attention, especially in assessing the forecasting models. The issue comes from predicted results that are questionable or cannot be trusted without applying the visibility analysis in the forecasting model. The visibility analysis is required to assess the model's ability to forecast future events. In conjunction with the issue, this paper introduces the analysis of visibility error with the different concepts during model development for the transmission prevention measures in making the decision. This study applied a statistical approach to assess the visibility error of forecasting performance in determining how long periods of forecasting and deciding for transmission prevention measures COVID-19 pandemics. Also, we developed the visibility error of time-variant using inductive logic. The result indicated that the number of data required to perform forecasting work on the basis of forecasting model specifications. In conclusion, this study has been completed to develop the statistical formula for identifying the largest time horizon in forecasting model N = V + 2. Also, this developed model can assist the stakeholder in forecasting the number of transmission prevention and making the decision in case of COVID-19 pandemic.

The intention of this paper is to propose some similarity measures between Fermatean fuzzy sets (FFSs). Firstly, we propose some score based similarity measures for finding similarity measures of FFSs and also propose score based cosine similarity measures between FFSs. Furthermore, we introduce three newly scored functions for effective uses of Fermatean fuzzy sets and discuss some relevant properties of cosine similarity measure. Fermatean fuzzy sets introduced by Senapati and Yager can manipulate uncertain information more easily in the process of multi-criteria decision making (MCDM) and group decision making. Here, we investigate score based similarity measures of Fermatean fuzzy sets and scout the uses of FFSs in pattern recognition. Based on different types of similarity measures a pattern recognition problem viz. personnel appointment is presented to describe the use of FFSs and its similarity measure as well as scores. The counterfeit results show that the proposed method is more malleable than the existing method(s). Finally, concluding remarks and the scope of future research of the proposed approach are given.

The Zinc doped calcium borate (Zn-CaB) was synthesized by the co-precipitation method. Zinc was known to exhibit a good antimicrobial effect without causing any environmental issues. However, the antimicrobial activity of zinc is relatively low as compared to silver or copper analogues. In the present investigation, an attempt was made to incorporate zinc in the matrix of calcium borates to enhance the antibacterial effect. Cosmetic products were made using the zinc-calcium-borates and the antibacterial/antifungal activity was evaluated and compared with the commercial products. The studies revealed that the antibacterial activity of Zn-CaB was equivalent to that commercially available product with a maximum of 99% reduction in bacterial strains and above 95% reduction in fungal strains. An attempt was made to incorporate a bacteriostatic effect on fabric by adding zinc-calcium-borates to detergent which exhibited prolonged antibacterial activity, even after 3 washing cycles. The cosmetic products were also evaluated for their thermal and photostability.

Multicriteria Decision Making (MCDM) is one the most important branches of decision theory. Due to the fact that MCDM methods have the utmost significance in management, scholars try to develop more MCDM methods. Since calculating the weights of criteria is an important step in any MCDM method, increasing the accuracy of weight calculating methods can highly affect these methods. This accuracy can be improved by less pairwise comparison between criteria. To this end, the present study seeks to make a comparison between two new weight calculating techniques, namely BWM and FUCOM in a fuzzy environment using a real-world case study Results of this study shows that FUCOM-F provides more reliable results compared to FBWM since its consistency is less than FBWM by a great amount.

The FT-IR spectrum of salicylic acid (SA) was studied in the region 10-4000 cm-1. The optimized molecular geometry and fundamental vibration frequencies are interpreted using structural optimizations based on the Functional Density Theory (DFT) method. Additionally, we used B3LYP / 6-311G (d, p) to determine the chemical descriptor, the ionization potential (I), the electron affinity (A), the chemical potential (μ), the chemical hardness (η). Nonlinear optical descriptors (NLO) such as dipole moment (μ), polarizability (α), first hyperpolarizability (β) and second hyperpolarizability (γ), 3D maps of HOMO and LUMO orbitals, lengths and Bond angles of salicylic acid isomers are also determined by both DFT and MP2 (The Møller-Plesset theory of order 2 perturbation) methods. The overall descriptors and the non-linear optical properties confirmed that salicylic acid is the reactive molecule and para-hydroxybenzoic acid is the stable molecule. An electrostatic molecular potential (MEP) study was also performed to determine the reactivity of molecules.

Field experiments were carried out for two consecutive seasons at the Experimental Shandaweel Agricultural Research Station, Sohag Governorate, Upper Egypt, during the growing seasons of 2013 and 2014, to study the effect of irrigation intervals and foliar spray of zinc and silicon treatments on chemical composition of maize. Results indicated that scheduling at every 10 days produced the N% , Crude protein%, Cu%, P%, K%, Zn%, Si%, Mn% and Fe% and foliar spray of zinc and silicon treatments produced the highest chemical composition of maize crop. The best N%, Crude protein%, Cu% and Mn were obtained from zinc + silicon treatments followed by zinc, silicon treatments. In contrast, untreated treatments produced the lowest values. It can be concluded that the scheduling at every 10 days and application of foliar spray of zinc + silicon treatments as the effective one could be recommended for scheduling irrigation at every 10 days with application of foliar spray of zinc, silicon or zinc +silicon treatments of maize crop at Shandaweel Agricultural Research Station, Sohag Governorate, Upper Egypt to obtain the best results from chemical composition of maize.

In most of the machining processes, the complexity arises in the selection of the right process parameters, which influence the machining process and output responses such as machinability and surface roughness. In such situations, it is important to estimate the inter-relationships among the output responses. One such method, Decision-Making Trial and Evaluation Laboratory (DEMATEL) is applied to study the inter-relationships of the output responses. Estimation of proper weights is also crucial where the output responses are conflicting in nature. In the current study, DEMATEL technique is used for estimating the inter-relationships for output responses in machining of EN 24 alloy under dry conditions. CRiteria Importance Through Inter-criteria Correlation (CRITIC) method is used to estimate the weights and finally the optimal selection of machining parameters is carried out using Techniques for Order Preference by Similarity to an Ideal Solution (TOPSIS) method. The model developed guides the decision maker in selection of precise weights, estimation of the inter relationships among the responses and selection of optimal process parameters.

A series of N-acetyl pyrazole derivatives, 1-acetyl-3-aryl-5-[5'-(4-nitrophenyl)-2'-furyl]-4,5-dihydro-1H-pyrazoles (5a-j) were synthesized by cyclocondensation reaction between 1-aryl-3-[5-(4-nitrophenyl)-2-furyl]prop-2-en-1-ones (4a-j) and hydrazine hydrate in glacial acetic acid at reflux temperature. Before that, compounds (4a-j) were synthesized by the condensation of 5-(4-nitrophenyl) furan-2-carbaldehyde (3) with various aromatic ketones by using alkali as catalyst. The constitution of the synthesized products has been characterized by using elemental analysis, Infrared,¹H-NMR, ¹³C-NMR spectroscopy and further supported by Mass spectroscopy. All the products have been screened for their in-vitro biological assay like antibacterial activity towards Gram-positive and Gram-negative bacterial strains and antifungal activity towards Aspergillus niger at a concentration of 40 µg/ml. It was exposed that the compounds 5a, 5b, 5c, 5d, 5g, 5h and 5j showed motivating antibacterial and antifungal activity compared to the used reference standard.

The present investigation was carried out to study the effects of inorganic, organic nitrogen fertilizers and activators (Humic and Fulvic acid) on chemical composition and productivity of corn. This study was conducted at Shandweel Agricultural Research Stations, Sohag Governorate, Egypt, and is situated at 26.6⁰ N latitude and 37.7⁰ E longitude. Its altitude is about 70 m above mean sea level. Also, this study was performed during two successive summer seasons 2014 and 2015. The experiments were laid down in split-split plot design with four replications. The treatments were included mineral nitrogen application in three levels (i.e. 60, 90 and 120 kg N fed.^-1), organic and bio fertilizer application (without organic and bio fertilizer, 10 m³ FYM fed.^-1 and Microbeine inoculume) as well as foliar spray of humic acid (water spraying, humic and fulvic acid spraying). The obtained results revealed that the interaction effects of all factors under study were significant for all studied traits.

Field experiments were carried out for two consecutive seasons at the Experimental Shandaweel Agricultural Research Station, Sohag Governorate, Upper Egypt, during the growing seasons of 2013 and 2014, to study the Effect of Irrigation intervals and foliar spray of zinc and silicon treatments on Maize growth and yield components of maize. Results indicated that, scheduling at every 10 days produced the highest plant height, Flag Leaf area (cm²), Cob length (cm), Weight of 100-grains (g), Biological yield (T/fad.) and Grain yield (ard./fed.) followed by irrigation at 15 and 20 days interval, in contrast irrigation at 25 days interval produced the lowest values and foliar spray of zinc and silicon treatments produced the highest plant height-improved yield and yield components of maize crop. The best yield was obtained from zinc + silicon treatments followed by zinc, silicon treatments. In contrast, untreated treatments produced the lowest values. It can be concluded that the scheduling at every 10 days and application of foliar spray of zinc + silicon treatments as the effective one could be recommended for scheduling irrigation at every 10 days with application of foliar spray of zinc + silicon treatments of maize crop at Shandaweel Agricultural Research Station, Sohag Governorate, Upper Egypt to obtained the best results from maize grain yield.