Measurement and analysis mechanical properties of cross-laminated timber (CLT) product: Case study on typical lampung lamina arrangement

Sugito, S.; Purba, R.; Rizkia, S.; Ardian, R.

Abstract: Recently, the development of cross-laminated timber (CLT) products that can substitute large-dimensional wood for structures and reduce waste of wood products with small dimensions and pieces continues to be developed, and demand from industries continues to increase. Therefore, this study aims to measure and analyze the mechanical properties of cross-laminated timber (CLT) products designed with a typical arrangement of the Lampung region, Indonesia, called a screen arrangement. Measurement and analysis of mechanical properties include measuring load tests and analyzing moments and stiffness of CLT products intended for floor and beam structures. The screen-type wood arrangement used in the product consists of an inner screen arrangement, an outer screen arrangement, and a standing screen arrangement with polyvinyl acetate adhesive. Load test measurements were carried out using a universal testing machine (UTM) and moment and bending stress analysis using engineering mechanics. Generally, the results show that CLT products with standing screens have smaller mechanical properties than those intended for floors and beams. This research shows that the typical CLT arrangement of the Lampung region (Indonesia), in the form of a screen, has strong mechanical properties and characteristics that can be compared with other arrangements.

How to cite this paper

 Sugito, S., Purba, R., Rizkia, S & Ardian, R. (2024). Measurement and analysis mechanical properties of cross-laminated timber (CLT) product: Case study on typical lampung lamina arrangement.Engineering Solid Mechanics, 12(2), 127-132.

References

Alshikh, Z., Trepci, E., & Rodriguez-Ubinas, E. (2023). Sustainable Off-Site Construction in Desert Environments: Zero-Energy Houses as Case Studies. Sustainability, 15(15), 11909. doi:doi.org/10.3390/su151511909
Anthony, C. J., & Ali, M. M. (2023). Structural Design of a Single-Family Residential Dwelling Using Cross-Laminated Timber (CLT). Sustainable Built Environment, Ch. 14. doi:doi.org/10.5772/intechopen.110790
ASTM. (2013). American society for testing materials: Standard test method for strength properties of adhesive bonds in shear by compression loading: ASTM D 905. Annual Book of ASTM Standards, 15. doi:doi.org/10.1520/D0905-08R13
Ba, J., Ji, X., Wang, B., Li, P., Lin, J., Cao, J., & Qi, J. (2022). Microstructure design of C/C composites through electrochemical corrosion for brazing to Nb. Journal of Materials Science & Technology, 104, 33-40. doi:doi.org/10.1016/j.jmst.2021.06.074
Bechert, S., Aldinger, L., Wood, D., Knippers, J., & Menges, A. (2021). Urbach Tower: Integrative structural design of a lightweight structure made of self-shaped curved cross-laminated timber. Structures, 33, 3667-3681. doi:doi.org/10.1016/j.istruc.2021.06.073
Bhandari, S., Riggio, M., Jahedi, S., Fischer, E. C., Muszynski, L., & Luo, Z. (2023). A review of modular cross laminated timber construction: Implications for temporary housing in seismic areas. Journal of Building Engineering, 63, 105485. doi:doi.org/10.1016/j.jobe.2022.105485
Bischoff, E. E. (2006). Three-dimensional packing of items with limited load bearing strength. European Journal of Operational Research, 168(3), 952-966. doi:doi.org/10.1016/j.ejor.2004.04.037
Bos, F., Wolfs, R., Ahmed, Z., & Salet, T. (2016). Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing. Virtual and Physical Prototyping, 11(3), 209-225. doi:doi.org/10.1080/17452759.2016.1209867
Browning, A., Ortiz, C., & Boyce, M. C. (2013). Mechanics of composite elasmoid fish scale assemblies and their bioinspired analogues. Journal of the Mechanical Behavior of Biomedical Materials, 19, 75-86. doi:doi.org/10.1016/j.jmbbm.2012.11.003
Cheng, L., Thomas, A., Glancey, J. L., & Karlsson, A. M. (2011). Mechanical behavior of bio-inspired laminated composites. Composites Part A: Applied Science and Manufacturing, 42(2), 211-220. doi:doi.org/10.1016/j.compositesa.2010.11.009
Drosos, V., Georgarakos, T., Loli, M., Anastasopoulos, I., Zarzouras, O., & Gazetas, G. (2012). Soil-Foundation-Structure Interaction with Mobilization of Bearing Capacity: Experimental Study on Sand. Journal of Geotechnical and Geoenvironmental Engineering, 138(11), 1369-1386. doi:doi.org/10.1061/(ASCE)GT.1943-5606.0000705
Familiana, H., Maulana, I., Karyadi, A., Cebro, I. S., & Sitorus, A. (2017). Characterization of aluminum surface using image processing methods and artificial neural network methods. In 2017 International Conference on Computing, Engineering, and Design (ICCED) (pp. 1-6). IEEE. doi:10.1109/CED.2017.8308113.
Fan, M., & Fu, F. (2017). 1 - Introduction: A perspective – natural fibre composites in construction. Advanced High Strength Natural Fibre Composites in Construction, 1-20. doi:doi.org/10.1016/B978-0-08-100411-1.00001-7
Gauch, H. L., Hawkins, W., Ibell, T., Allwood, J. M., & Dunant, C. F. (2022). Carbon vs. cost option mapping: A tool for improving early-stage design decisions. Automation in Construction, 136, 104178. doi:doi.org/10.1016/j.autcon.2022.104178
Guo, H., Liu, Y., Meng, Y., Huang, H., Sun, C., & Shao, Y. (2017). A Comparison of the Energy Saving and Carbon Reduction Performance between Reinforced Concrete and Cross-Laminated Timber Structures in Residential Buildings in the Severe Cold Region of China. Sustainability, 9(8). doi:doi.org/10.3390/su9081426
Ibañez, D., Salka, M., Guallart, V., Boeri, S., Shamir, L., De Marco, M. L., . . . Boulet, S. (2023). Innovative Design, Materials, and Construction Models for BioCities. Transforming Biocities: Designing Urban Spaces Inspired by Nature, 183-215. doi:doi.org/10.1007/978-3-031-29466-2_8
Jones, K., Stegemann, J., Sykes, J., & Winslow, P. (2016). Adoption of unconventional approaches in construction: The case of cross-laminated timber. Construction and Building Materials, 125, 690-702. doi:doi.org/10.1016/j.conbuildmat.2016.08.088
Khaleghi, M., Salimi, J., Farhangi, V., Moradi, M. J., & Karakouzian, M. (2021). Application of Artificial Neural Network to Predict Load Bearing Capacity and Stiffness of Perforated Masonry Walls. CivilEng, 2(1), 48-67. doi:doi.org/10.3390/civileng2010004
Kurent, B., Brank, B., & Ao, W. K. (2023). Model updating of seven-storey cross-laminated timber building designed on frequency-response-functions-based modal testing. Structure and Infrastructure Engineering, 19(2), 178-196. doi:doi.org/10.1080/15732479.2021.1931893
Li, X., Ashraf, M., Subhani, M., Kremer, P., Li, H., & Anwar-Us-Saadat, M. (2021). Rolling shear properties of cross-laminated timber (CLT) made from Australian Radiata Pine – An experimental study. Structures, 33, 423-432. doi:doi.org/10.1016/j.istruc.2021.04.067
Lineham, S. A., Thomson, D., Bartlett, A. I., Bisby, L. A., & Hadden, R. M. (2016). Structural response of fire-exposed cross-laminated timber beams under sustained loads. Fire Safety Journal, 85, 23-34. doi:doi.org/10.1016/j.firesaf.2016.08.002
Llorca, J., González, C., Molina-Aldareguía, J. M., Segurado, J., Seltzer, R., Sket, F., . . . Canal, L. P. (2011). Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing. Advanced Materials, 23(44), 5130-5147. doi:doi.org/10.1002/adma.201101683
Martini, R., Balit, Y., & Barthelat, F. (2017). A comparative study of bio-inspired protective scales using 3D printing and mechanical testing. Acta Biomaterialia, 55, 360-372. doi:doi.org/10.1016/j.actbio.2017.03.025
Mayencourt, P., & Mueller, C. (2019). Structural Optimization of Cross-laminated Timber Panels in One-way Bending. Structures, 18, 48-59. doi:doi.org/10.1016/j.istruc.2018.12.009
Navaratnam, S., Widdowfield Small, D., Gatheeshgar, P., Poologanathan, K., Thamboo, J., Higgins, C., & Mendis, P. (2021). Development of cross laminated timber-cold-formed steel composite beam for floor system to sustainable modular building construction. Structures, 32, 681-690. doi:doi.org/10.1016/j.istruc.2021.03.051
Naya, F., González, C., Lopes, C. S., Van der Veen, S., & Pons, F. (2017). Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects. Composites Part A: Applied Science and Manufacturing, 92, 146-157. doi:doi.org/10.1016/j.compositesa.2016.06.018
Rivera, J., Murata, S., Hosseini, M. S., Trikanad, A. A., James, R., Pickle, A., . . . Kisailus, D. (2021). Structural Design Variations in Beetle Elytra. Advanced Functional Materials, 31(50), 2106468. doi:doi.org/10.1002/adfm.202106468
Ronquillo, G., Hopkin, D., & Spearpoint, M. (2021). Review of large-scale fire tests on cross-laminated timber. Journal of Fire Sciences, 39(5), 327-369. doi:doi.org/10.1177/07349041211034460
Sandberg, D., Gorbacheva, G., Lichtenegger, H., Niemz, P., & Teischinger, A. (2023). Advanced Engineered Wood-Material Concepts. Springer Handbook of Wood Science and Technology, 1835-1888. doi:doi.org/10.1007/978-3-030-81315-4_35
Sood, A. K., Ohdar, R. K., & Mahapatra, S. S. (2010). Parametric appraisal of mechanical property of fused deposition modelling processed parts. Materials & Design, 31(1), 287-295. doi:doi.org/10.1016/j.matdes.2009.06.016
Sugito, S., Alisjahbana, S. W., & Riyanto, H. (2022). Modeling of Mechanical Performance from Concrete Made by Combining Iron Sand and Glass Powder Filler under Hot Water Curing Condition. Mathematical Modelling of Engineering Problems, 9(2). doi:doi.org/10.18280/mmep.090216
Yu, J., & Tan, K.-H. (2013). Experimental and numerical investigation on progressive collapse resistance of reinforced concrete beam column sub-assemblages. Engineering Structures, 55, 90-106. doi:doi.org/10.1016/j.engstruct.2011.08.040