How to cite this paper
Yadav, S., Pawar, R., Sambare, A & Deshpande, S. (2024). Finite element analysis and design optimization of composite T-joints for enhanced maritime and aerospace applications.Engineering Solid Mechanics, 12(2), 157-164.
Refrences
Akrami, R., Fotouhi, S., Fotouhi, M., Bodaghi, M., Clamp, J., & Bolouri, A. (2019). High-performance bio-inspired composite T-joints. Composites Science and Technology, 184, 107840–107840. https://doi.org/https://doi.org/10.1016/j.compscitech.2019.107840
Caliskan, U., & Apalak, M. K. (2019). Low speed impact behaviour of adhesively bonded foam-core sandwich T-joints. Journal of Adhesion Science and Technology, 33(3), 217–242. https://doi.org/https://doi.org/10.1080/01694243.2018.1529882
Dharmawan, F., Li, H., Herszberg, I., & John, S. M. (2008). Applicability of the crack tip element analysis for damage prediction of composite T-joints. Composite Structures, 86(1–3), 61–68. https://doi.org/https://doi.org/10.1016/j.compstruct.2008.03.030
Fathallah, E., & Helal, M. (2019). Finite element modelling and multi-objective optimization of composite submarine pressure hull subjected to hydrostatic pressure. IOP Conference Series: Materials Science and Engineering, 683(1), 012072–012072. https://doi.org/https://doi.org/10.1088/1757-899x/683/1/012072
Hodul, J., Žlebek, T., Mészárosová, L., Jakubík, A., & Drochytka, R. (2021). Adhesives for the Installation of Cast Basalt Elements on Metal and Comparison of Properties when Using Different Types of Fillers. Key Engineering Materials, 898, 35–41. https://doi.org/https://doi.org/10.4028/www.scientific.net/kem.898.35
Jeykrishnan, J., Ramnath, B. V., Savariraj, X. H., Prakash, R. D., Rajan, V. R. D., & Kumar, D. (2016). Investigation on Tensile and Impact Behavior of Aluminum Base Silicon Carbide Metal Matrix Composites. Indian Journal of Science and Technology, 9(37). https://doi.org/https://doi.org/10.17485/ijst/2016/v9i37/101979
Juliyana, M., & Krishnan, R. (2016). A Methodology for Enhancing the Shear Response of Sandwich Composite Panel: Sandwich Composite Panel with Stair Keys. Indian Journal of Science and Technology. https://doi.org/https://doi.org/10.17485/ijst/2016/v9i32/96217
Khalili, S. M. R., & Ghaznavi, A. (2011). Numerical analysis of adhesively bonded T-joints with structural sandwiches and study of design parameters. International Journal of Adhesion and Adhesives, 31(5), 347–356. https://doi.org/https://doi.org/10.1016/j.ijadhadh.2010.12.005
Kim, D.-H., Jung, S., Lee, J. S. H., & Chang, S.-J. (2006). Parametric study on design of composite–foam–resin concrete sandwich structures for precision machine tool structures. Composite Structures, 75(1–4), 408–414. https://doi.org/https://doi.org/10.1016/j.compstruct.2006.04.022
Mostafa, A., Shankar, K., & Morozov, E. V. (2013). Influence of shear keys orientation on the shear performance of composite sandwich panel with PVC foam core: Numerical study. Materials in Engineering, 51, 1008–1017. https://doi.org/https://doi.org/10.1016/j.matdes.2013.05.024
Mostafa, A., Shankar, K., & Morozov, E. V. (2013). Insight into the shear behaviour of composite sandwich panels with foam core. Materials in Engineering, 50, 92–101. https://doi.org/https://doi.org/10.1016/j.matdes.2013.03.016
Rahm, M., & Evegren, F. (2016). Structural Fire Integrity Testing of Lightweight Structures. https://doi.org/https://doi.org/10.1115/omae2016-54418
Sharma, S., & Obaid, A. J. (2021). Design and Analysis of Metal Expansion bellows under Axial and Transverse loadsusing CATIA V5 R21 software. IOP Conference Series: Materials Science and Engineering, 1145(1), 012054–012054. https://doi.org/https://doi.org/10.1088/1757-899x/1145/1/012054
Shohel, S. M., Riyad, S. H., & Noman, A. A. (2023). Study to analyze the mechanical strength of composite glass fiber laminated with resin epoxy, resin polyester, and PVC foam under tensile loading conditions by numerically using finite element analysis via Ansys. Materials Today: Proceedings. https://doi.org/https://doi.org/10.1016/j.matpr.2023.05.062
Smith, S. A., & Shivakumar, K. N. (2001). Modified Mode-I cracked sandwich beam (CSB) fracture test. 19th AIAA Applied Aerodynamics Conference. https://doi.org/https://doi.org/10.2514/6.2001-1221
Toftegaard, H. L., & Lystrup, A. (2005). Design and test of lightweight sandwich T-joint for naval ships. Composites Part A-Applied Science and Manufacturing, 36(8), 1055–1065. https://doi.org/https://doi.org/10.1016/j.compositesa.2004.10.031
Wang, C.-N., Hsueh, M.-H., Lai, C.-J., & Wang, S. (2021). Improvement of the Welding Process for Fillet Air Test for the Biggest Taiwan Shipyard. Journal of Marine Science and Engineering, 9(1), 80–80. https://doi.org/https://doi.org/10.3390/jmse9010080
Caliskan, U., & Apalak, M. K. (2019). Low speed impact behaviour of adhesively bonded foam-core sandwich T-joints. Journal of Adhesion Science and Technology, 33(3), 217–242. https://doi.org/https://doi.org/10.1080/01694243.2018.1529882
Dharmawan, F., Li, H., Herszberg, I., & John, S. M. (2008). Applicability of the crack tip element analysis for damage prediction of composite T-joints. Composite Structures, 86(1–3), 61–68. https://doi.org/https://doi.org/10.1016/j.compstruct.2008.03.030
Fathallah, E., & Helal, M. (2019). Finite element modelling and multi-objective optimization of composite submarine pressure hull subjected to hydrostatic pressure. IOP Conference Series: Materials Science and Engineering, 683(1), 012072–012072. https://doi.org/https://doi.org/10.1088/1757-899x/683/1/012072
Hodul, J., Žlebek, T., Mészárosová, L., Jakubík, A., & Drochytka, R. (2021). Adhesives for the Installation of Cast Basalt Elements on Metal and Comparison of Properties when Using Different Types of Fillers. Key Engineering Materials, 898, 35–41. https://doi.org/https://doi.org/10.4028/www.scientific.net/kem.898.35
Jeykrishnan, J., Ramnath, B. V., Savariraj, X. H., Prakash, R. D., Rajan, V. R. D., & Kumar, D. (2016). Investigation on Tensile and Impact Behavior of Aluminum Base Silicon Carbide Metal Matrix Composites. Indian Journal of Science and Technology, 9(37). https://doi.org/https://doi.org/10.17485/ijst/2016/v9i37/101979
Juliyana, M., & Krishnan, R. (2016). A Methodology for Enhancing the Shear Response of Sandwich Composite Panel: Sandwich Composite Panel with Stair Keys. Indian Journal of Science and Technology. https://doi.org/https://doi.org/10.17485/ijst/2016/v9i32/96217
Khalili, S. M. R., & Ghaznavi, A. (2011). Numerical analysis of adhesively bonded T-joints with structural sandwiches and study of design parameters. International Journal of Adhesion and Adhesives, 31(5), 347–356. https://doi.org/https://doi.org/10.1016/j.ijadhadh.2010.12.005
Kim, D.-H., Jung, S., Lee, J. S. H., & Chang, S.-J. (2006). Parametric study on design of composite–foam–resin concrete sandwich structures for precision machine tool structures. Composite Structures, 75(1–4), 408–414. https://doi.org/https://doi.org/10.1016/j.compstruct.2006.04.022
Mostafa, A., Shankar, K., & Morozov, E. V. (2013). Influence of shear keys orientation on the shear performance of composite sandwich panel with PVC foam core: Numerical study. Materials in Engineering, 51, 1008–1017. https://doi.org/https://doi.org/10.1016/j.matdes.2013.05.024
Mostafa, A., Shankar, K., & Morozov, E. V. (2013). Insight into the shear behaviour of composite sandwich panels with foam core. Materials in Engineering, 50, 92–101. https://doi.org/https://doi.org/10.1016/j.matdes.2013.03.016
Rahm, M., & Evegren, F. (2016). Structural Fire Integrity Testing of Lightweight Structures. https://doi.org/https://doi.org/10.1115/omae2016-54418
Sharma, S., & Obaid, A. J. (2021). Design and Analysis of Metal Expansion bellows under Axial and Transverse loadsusing CATIA V5 R21 software. IOP Conference Series: Materials Science and Engineering, 1145(1), 012054–012054. https://doi.org/https://doi.org/10.1088/1757-899x/1145/1/012054
Shohel, S. M., Riyad, S. H., & Noman, A. A. (2023). Study to analyze the mechanical strength of composite glass fiber laminated with resin epoxy, resin polyester, and PVC foam under tensile loading conditions by numerically using finite element analysis via Ansys. Materials Today: Proceedings. https://doi.org/https://doi.org/10.1016/j.matpr.2023.05.062
Smith, S. A., & Shivakumar, K. N. (2001). Modified Mode-I cracked sandwich beam (CSB) fracture test. 19th AIAA Applied Aerodynamics Conference. https://doi.org/https://doi.org/10.2514/6.2001-1221
Toftegaard, H. L., & Lystrup, A. (2005). Design and test of lightweight sandwich T-joint for naval ships. Composites Part A-Applied Science and Manufacturing, 36(8), 1055–1065. https://doi.org/https://doi.org/10.1016/j.compositesa.2004.10.031
Wang, C.-N., Hsueh, M.-H., Lai, C.-J., & Wang, S. (2021). Improvement of the Welding Process for Fillet Air Test for the Biggest Taiwan Shipyard. Journal of Marine Science and Engineering, 9(1), 80–80. https://doi.org/https://doi.org/10.3390/jmse9010080