How to cite this paper
Nurjannah, S., Saloma, S., Yulindasari, Y., Aminuddin, K & Chuhairy, G. (2023). The analysis of numerical self-compacting concrete wall panel models with variations of shear reinforcement.Engineering Solid Mechanics, 11(1), 89-102.
Refrences
Abdel-Jaber, M., & El-Nimri, R. (2022). Comparative investigation, numerical modeling, and buckling analysis of one-way reinforced concrete wall panels. Results in Engineering, 100459. https://doi.org/10.1016/j.rineng.2022.100459
AbdelRahman, B., & Galal, K. (2021). Experimental investigation of axial compressive behavior of square and rectangular confined concrete-masonry structural wall boundary elements. Engineering Structures, 243, 112584. https://doi.org/10.1016/j.engstruct.2021.112584
Aly, N., & Galal, K. (2020). Experimental investigation of axial load and detailing effects on the inelastic response of reinforced-concrete masonry structural walls with boundary elements. Journal of Structural Engineering, 146(12), 04020259. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002842
American Concrete Institute (ACI). (2013). Guide for Testing Reinforced Concrete Structural Elements Under Slowly Applied Simulated Seismic Loads, ACI 374.2 R13.
Bai, L., Hou, C., Cao, M., Hu, J., Zhou, T., & Wei, H. (2021). Cyclic performance of steel moment frames with prefabricated RC and ECC wall panels. Engineering Structures, 242, 112492. https://doi.org/10.1016/j.engstruct.2021.112492
Budiono, B., Nurjannah, S. A., & Imran, I. (2019). Non-linear Numerical Modeling of Partially Pre-stressed Beam-column Sub-assemblages Made of Reactive Powder Concrete. Bandung Institute of Technology. https://doi.org/10.5614/j.eng.technol.sci.2019.51.1.3
Ergun, S., & Demir, A. (2015). Effect of hysteretic models on seismic behavior of existing RC structures. Journal of Performance of Constructed Facilities, 29(6), 04014160. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000653
FEMA 356, F. E. (2000). Prestandard and commentary for the seismic rehabilitation of buildings. Federal Emergency Management Agency: Washington, DC, USA.
Gu, Q., Zhao, D., Li, J., Peng, B., Deng, Q., & Tian, S. (2022). Seismic performance of T-shaped precast concrete superposed shear walls with cast-in-place boundary columns and special boundary elements. Journal of Building Engineering, 45, 103503. https://doi.org/10.1016/j.jobe.2021.103503
Gupta, L. M., Ray, M. R., & Labhasetwar, P. K. (Eds.). (2020). Advances in Civil Engineering and Infrastructural Development: Select Proceedings of ICRACEID 2019. Springer.
Hanafiah, Saloma, & Whardani, P. N. K. (2017, November). The behavior of self-compacting concrete (SCC) with bagasse ash. In AIP Conference Proceedings (Vol. 1903, No. 1, p. 050005). AIP Publishing LLC. https://doi.org/10.1063/1.5011544
Khan, S. A., Koç, M., & Al-Ghamdi, S. G. (2021). Sustainability assessment, potentials and challenges of 3D printed concrete structures: A systematic review for built environmental applications. Journal of Cleaner Production, 303, 127027. https://doi.org/10.1016/j.jclepro.2021.127027
Li, J., Tan, D., Zhang, X., Wan, C., & Xue, G. (2021). Mixture design method of self-compacting lightweight aggregate concrete based on rheological property and strength of mortar. Journal of Building Engineering, 43, 102660. https://doi.org/10.1016/j.jobe.2021.102660
Li, J., Zhao, E., Niu, J., & Wan, C. (2021). Study on mixture design method and mechanical properties of steel fiber reinforced self-compacting lightweight aggregate concrete. Construction and Building Materials, 267, 121019. https://doi.org/10.1016/j.conbuildmat.2020.121019
Li, W., Lin, X., Bao, D. W., & Xie, Y. M. (2022, April). A review of formwork systems for modern concrete construction. In Structures (Vol. 38, pp. 52-63). Elsevier. https://doi.org/10.1016/j.istruc.2022.01.089
Li, Y., Li, Z., Tang, Z., Xu, L., Wang, W., Yang, X., & Chen, Y. (2022). Seismic behaviour of a novel hollow-core precast shear wall with cast-in-situ boundary elements. Journal of Building Engineering, 52, 104469. https://doi.org/10.1016/j.jobe.2022.104469
Lu, Y., & Henry, R. S. (2018). Comparison of minimum vertical reinforcement requirements for reinforced concrete walls. ACI Structural Journal, 115(3), 673-687. https://doi.org/10.14359/51701146
Nurjannah, S., Saloma, S., Idris, Y., Usman, A., Juliantina, I., & Aprilia, C. (2022). The Behavior of Interior Beam-Column Joint Models Using Self-Compacting Concrete with Variations of Shear Reinforcement Subjected to Cyclic Lateral Loads. Civil Engineering and Architecture 10(4): 1574-1589. https://doi.org/10.13189/cea.2022.100427
Nuruzzaman, M., Kuri, J. C., & Sarker, P. K. (2022). Strength, permeability and microstructure of self-compacting concrete with the dual use of ferronickel slag as fine aggregate and supplementary binder. Construction and Building Materials, 318, 125927. https://doi.org/10.1016/j.conbuildmat.2021.125927
Ofuyatan, O. M., Olutoge, F., Omole, D., & Babafemi, A. (2021). Influence of palm ash on properties of light weight self-compacting concrete. Cleaner Engineering and Technology, 4, 100233. https://doi.org/10.1016/j.clet.2021.100233
Okamura, H., & Ouchi, M. (2003). Self-compacting concrete. Journal of advanced concrete technology, 1(1), 5-15. https://doi.org/10.3151/jact.1.5
Park, R., & Paulay, T. (1991). Reinforced concrete structures. John Wiley & Sons.
Park, R. (1989). Evaluation of ductility of structures and structural assemblages from laboratory testing. Bulletin of the new Zealand society for earthquake engineering, 22(3), 155-166. https://doi.org/10.5459/bnzsee.22.3.155-166
Saloma, S., Nurjannah, S., Usman, A., Idris, Y., Juliantina, I., & Effendy, R. (2022). The behavior of self compacting concrete exterior beam-column joints with a variation of shear reinforcement against cyclic lateral loads. Engineering Solid Mechanics, 10(4), 373-386. https://doi.org/10.5267/j.esm.2022.6.001
Sengupta, P., & Li, B. (2017). Hysteresis modeling of reinforced concrete structures: state of the art. ACI Structural Journal, 114(1), 25-38. https://doi.org/10.14359/51689422
Vakhshouri, B., & Nejadi, S. (2016). Mix design of light-weight self-compacting concrete. Case Studies in Construction Materials, 4, 1-14. http://dx.doi.org/10.1016/j.cscm.2015.10.002
Wu, H., Zhuang, X., Zhang, W., & Zhao, Z. (2022). Anisotropic ductile fracture: Experiments, modeling, and numerical simulations. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2022.07.128
Zhang, C., Huang, W., Wang, H., & Gao, J. (2021). Experimental and numerical study on seismic performance of semi-rigid steel frame infilled with prefabricated damping wall panels. Engineering Structures, 246, 113056. https://doi.org/10.1016/j.engstruct.2021.113056
AbdelRahman, B., & Galal, K. (2021). Experimental investigation of axial compressive behavior of square and rectangular confined concrete-masonry structural wall boundary elements. Engineering Structures, 243, 112584. https://doi.org/10.1016/j.engstruct.2021.112584
Aly, N., & Galal, K. (2020). Experimental investigation of axial load and detailing effects on the inelastic response of reinforced-concrete masonry structural walls with boundary elements. Journal of Structural Engineering, 146(12), 04020259. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002842
American Concrete Institute (ACI). (2013). Guide for Testing Reinforced Concrete Structural Elements Under Slowly Applied Simulated Seismic Loads, ACI 374.2 R13.
Bai, L., Hou, C., Cao, M., Hu, J., Zhou, T., & Wei, H. (2021). Cyclic performance of steel moment frames with prefabricated RC and ECC wall panels. Engineering Structures, 242, 112492. https://doi.org/10.1016/j.engstruct.2021.112492
Budiono, B., Nurjannah, S. A., & Imran, I. (2019). Non-linear Numerical Modeling of Partially Pre-stressed Beam-column Sub-assemblages Made of Reactive Powder Concrete. Bandung Institute of Technology. https://doi.org/10.5614/j.eng.technol.sci.2019.51.1.3
Ergun, S., & Demir, A. (2015). Effect of hysteretic models on seismic behavior of existing RC structures. Journal of Performance of Constructed Facilities, 29(6), 04014160. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000653
FEMA 356, F. E. (2000). Prestandard and commentary for the seismic rehabilitation of buildings. Federal Emergency Management Agency: Washington, DC, USA.
Gu, Q., Zhao, D., Li, J., Peng, B., Deng, Q., & Tian, S. (2022). Seismic performance of T-shaped precast concrete superposed shear walls with cast-in-place boundary columns and special boundary elements. Journal of Building Engineering, 45, 103503. https://doi.org/10.1016/j.jobe.2021.103503
Gupta, L. M., Ray, M. R., & Labhasetwar, P. K. (Eds.). (2020). Advances in Civil Engineering and Infrastructural Development: Select Proceedings of ICRACEID 2019. Springer.
Hanafiah, Saloma, & Whardani, P. N. K. (2017, November). The behavior of self-compacting concrete (SCC) with bagasse ash. In AIP Conference Proceedings (Vol. 1903, No. 1, p. 050005). AIP Publishing LLC. https://doi.org/10.1063/1.5011544
Khan, S. A., Koç, M., & Al-Ghamdi, S. G. (2021). Sustainability assessment, potentials and challenges of 3D printed concrete structures: A systematic review for built environmental applications. Journal of Cleaner Production, 303, 127027. https://doi.org/10.1016/j.jclepro.2021.127027
Li, J., Tan, D., Zhang, X., Wan, C., & Xue, G. (2021). Mixture design method of self-compacting lightweight aggregate concrete based on rheological property and strength of mortar. Journal of Building Engineering, 43, 102660. https://doi.org/10.1016/j.jobe.2021.102660
Li, J., Zhao, E., Niu, J., & Wan, C. (2021). Study on mixture design method and mechanical properties of steel fiber reinforced self-compacting lightweight aggregate concrete. Construction and Building Materials, 267, 121019. https://doi.org/10.1016/j.conbuildmat.2020.121019
Li, W., Lin, X., Bao, D. W., & Xie, Y. M. (2022, April). A review of formwork systems for modern concrete construction. In Structures (Vol. 38, pp. 52-63). Elsevier. https://doi.org/10.1016/j.istruc.2022.01.089
Li, Y., Li, Z., Tang, Z., Xu, L., Wang, W., Yang, X., & Chen, Y. (2022). Seismic behaviour of a novel hollow-core precast shear wall with cast-in-situ boundary elements. Journal of Building Engineering, 52, 104469. https://doi.org/10.1016/j.jobe.2022.104469
Lu, Y., & Henry, R. S. (2018). Comparison of minimum vertical reinforcement requirements for reinforced concrete walls. ACI Structural Journal, 115(3), 673-687. https://doi.org/10.14359/51701146
Nurjannah, S., Saloma, S., Idris, Y., Usman, A., Juliantina, I., & Aprilia, C. (2022). The Behavior of Interior Beam-Column Joint Models Using Self-Compacting Concrete with Variations of Shear Reinforcement Subjected to Cyclic Lateral Loads. Civil Engineering and Architecture 10(4): 1574-1589. https://doi.org/10.13189/cea.2022.100427
Nuruzzaman, M., Kuri, J. C., & Sarker, P. K. (2022). Strength, permeability and microstructure of self-compacting concrete with the dual use of ferronickel slag as fine aggregate and supplementary binder. Construction and Building Materials, 318, 125927. https://doi.org/10.1016/j.conbuildmat.2021.125927
Ofuyatan, O. M., Olutoge, F., Omole, D., & Babafemi, A. (2021). Influence of palm ash on properties of light weight self-compacting concrete. Cleaner Engineering and Technology, 4, 100233. https://doi.org/10.1016/j.clet.2021.100233
Okamura, H., & Ouchi, M. (2003). Self-compacting concrete. Journal of advanced concrete technology, 1(1), 5-15. https://doi.org/10.3151/jact.1.5
Park, R., & Paulay, T. (1991). Reinforced concrete structures. John Wiley & Sons.
Park, R. (1989). Evaluation of ductility of structures and structural assemblages from laboratory testing. Bulletin of the new Zealand society for earthquake engineering, 22(3), 155-166. https://doi.org/10.5459/bnzsee.22.3.155-166
Saloma, S., Nurjannah, S., Usman, A., Idris, Y., Juliantina, I., & Effendy, R. (2022). The behavior of self compacting concrete exterior beam-column joints with a variation of shear reinforcement against cyclic lateral loads. Engineering Solid Mechanics, 10(4), 373-386. https://doi.org/10.5267/j.esm.2022.6.001
Sengupta, P., & Li, B. (2017). Hysteresis modeling of reinforced concrete structures: state of the art. ACI Structural Journal, 114(1), 25-38. https://doi.org/10.14359/51689422
Vakhshouri, B., & Nejadi, S. (2016). Mix design of light-weight self-compacting concrete. Case Studies in Construction Materials, 4, 1-14. http://dx.doi.org/10.1016/j.cscm.2015.10.002
Wu, H., Zhuang, X., Zhang, W., & Zhao, Z. (2022). Anisotropic ductile fracture: Experiments, modeling, and numerical simulations. Journal of Materials Research and Technology. https://doi.org/10.1016/j.jmrt.2022.07.128
Zhang, C., Huang, W., Wang, H., & Gao, J. (2021). Experimental and numerical study on seismic performance of semi-rigid steel frame infilled with prefabricated damping wall panels. Engineering Structures, 246, 113056. https://doi.org/10.1016/j.engstruct.2021.113056