In many quality control applications, the quality of a process or product is explained by the relationship between response variable and one or more explanatory variables, called a profile. In this paper, a new fuzzy EWMA control chart for phase II fuzzy profile monitoring is proposed. To this end, we extend EWMA control charts to its equivalent Fuzzy type and then implement fuzzy ranking methods to determine whether the process fuzzy profile is under or out of control. The proposed method is capable of identifying small changes in process under condition of process profile explaining parameters vagueness, roughness and uncertainty. Determining the source of changes, this method provides us with the possibility of recognizing the causes of process transition from stable mode, removing these causes and restoring the process stable mode.

Medical tourism is an international phenomenon where some tourists travel long to reach treatment-therapeutic services because of high expenses, long waits, lacking in insurance, and applying services and insufficient access to health services in the destination. This industry, now, by making 60 billion dollars annually in international level, has been considered as one the most profitable markets and the number of countries to provide facilities and treatment services for foreign tourists tend to increase. Many countries provide applicable and legal plans for development of this industry. This paper aims at planning and improving medical tourism in megalopolis Shiraz. The dominating approach in the present study is developmental-applied and the method is descriptive, analytical and survey study. To analyze the data and to test the research hypothesis, the linear Pearson correlation and ANOVA were used. The results of the present study have indicated that all quality factors of treatment and tourism services, culture, facilities, medical and tourist equipment and ICT, had positive and direct correlation with developing medical tourism and the factor of price had negative and reverse correlation with it. In other words, the higher the price is, the less the medical tourism development is and vice versa. Also, the ANOVA showed that among medical tourists from various countries regarding satisfaction with the price of treatment and tourist services, the quality of treatment and tourist services, culture, facilities, medical and tourist equipment and ICT, there are significant differences and Kuwaiti tourists were the most satisfied tourists and Afghani ones were the least satisfied.

In this paper, we explored an economic production quantity model (EPQ) model for finite production rate and deteriorating items with time-dependent trapezoidal demand. The objective of the model under study is to determine the optimal production run-time as well as the number of production cycle in order to maximize the profit. Numerical example is also given to illustrate the model and sensitivity analyses regarding various parameters are performed to study their effects on the optimal policy.

The present work deals with the comparison of four multi response optimization methods, viz. multiple response signal-to-noise (MRSN) ratio, weighted signal-to-noise (WSN) ratio, Grey relational analysis (GRA), and VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje in Serbian) methods taking a case study in turning mild steel specimen using HSS cutting tool. The various factors like cutting speed, feed rate, depth of cut and coolant flow rate are considered as the input process variables, while the material removal rate (MRR), surface roughness (SR) and specific energy consumption (SEC) are considered as various performance characteristics. One set of experimental data is analyzed using the standardized procedures. The optimization performances of these four methods are compared. The results show that MRSN ratio method proves to be the best optimization method. It is found that the feed rate has a highest impact on the overall performance as compared to other process parameters.

This paper studies a three-level supply chain with one retailer, one distributer and one manufacturer under disruption. First, we show that profit sharing and return policy contracts established between members can coordinate this supply chain. Then, we investigate the effect of demand disruption in supply chain and we illustrate the possibility of breaking the initial desirable coordination. We consider two possible scenarios for the demand disruption separately; afterwards we define the revised coordinator parameters to respond to their effect in supply chain. Numerical examples for validation and evaluation of our model are also elaborated.

Fault detection process (FDP) and Fault correction process (FCP) are important phases of software development life cycle (SDLC). It is essential for software to undergo a testing phase, during which faults are detected and corrected. The main goal of this article is to allocate the testing resources in an optimal manner to minimize the cost during testing phase using FDP and FCP under dynamic environment. In this paper, we first assume there is a time lag between fault detection and fault correction. Thus, removal of a fault is performed after a fault is detected. In addition, detection process and correction process are taken to be independent simultaneous activities with different budgetary constraints. A structured optimal policy based on optimal control theory is proposed for software managers to optimize the allocation of the limited resources with the reliability criteria. Furthermore, release policy for the proposed model is also discussed. Numerical example is given in support of the theoretical results.

Trade credit is the most succeeding economic phenomenon which is used by the supplier for encouraging the retailers to buy more quantity. In this article, a mathematical model with stock dependent demand and deterioration is developed to investigate the retailer’s optimal inventory policy under the scheme of permissible delay in payment. It is assumed that defective items are produced during the production process and delay period is progressive. The objective is to minimize the total average cost of the system. To exemplify hypothesis of the proposed model numerical examples and sensitivity analysis are provided. Finally, the convexities of the cost functions and the effects of changing parameters are represented through the graphs.

In this paper, group scheduling problem in no-wait flexible flowshop is considered by considering two stages with group sequence-dependent setup times and random breakdown of the machines. Genetic algorithm and simulated annealing based heuristics have been proposed to solve the problem. The primary objective of scheduling is to minimize the maximum completion time of the jobs for two classes of small and large scale problems. Computational results show that both GA and SA algorithms perform properly, but SA appeared to provide better results for both small and large scale problems.

Component-based software system (CBSS) development technique is an emerging discipline that promises to take software development into a new era. As hardware systems are presently being constructed from kits of parts, software systems may also be assembled from components. It is more reliable to reuse software than to create. It is the glue code and individual components reliability that contribute to the reliability of the overall system. Every component contributes to overall system reliability according to the number of times it is being used, some components are of critical usage, known as usage frequency of component. The usage frequency decides the weight of each component. According to their weights, each component contributes to the overall reliability of the system. Therefore, ranking of components may be obtained by analyzing their reliability impacts on overall application. In this paper, we propose the application of fuzzy multi-objective optimization on the basis of ratio analysis, Fuzzy-MOORA. The method helps us find the best suitable alternative, software component, from a set of available feasible alternatives named software components. It is an accurate and easy to understand tool for solving multi-criteria decision making problems that have imprecise and vague evaluation data. By the use of ratio analysis, the proposed method determines the most suitable alternative among all possible alternatives, and dimensionless measurement will realize the job of ranking of components for estimating CBSS reliability in a non-subjective way. Finally, three case studies are shown to illustrate the use of the proposed technique.

Inventories are the materials stored either waiting for processing or experiencing processing and in some cases for future delivery. Inventories are treated both as blessings and evil. As they are like money placed in a drawer, assets tied up in investments, incurring costs for the care of the stored material and also subject to spoilage and obsolescence there have been a spate of programs developed by industries, all aimed at reducing inventory levels and increasing efficiency on the shop floor. Nevertheless, they do have positive purposes such as stable source of input required for production, less replenishment and may reduce ordering costs because of economies of scale. Finished goods inventories provide for better customer service. So formulating a suitable inventory model is one of the major concerns for an industry. Again considering reliability of any process is an important trend in the current research activities. Inventory models could be both deterministic and probabilistic and both of which must account for the reliability of the associated production process. This paper discusses the major works in the field of inventory modeling driven by reliability considerations, which ranges from the very beginning to latest works just published.