The present study has been conducted in order to investigate the documentation of the organiza-tional knowledge condition from the managers’ perspective of libraries, museums, and Docu-ments Center of Astan Quds Razavi based on Dalkir model [Dalkir, K. (2005). Knowledge Management in Theory and Practice. Elsevier. Butterworth-Heinemann.]. The survey popula-tion consisted of all managers of Astan Quds libraries. The relevant information was gathered using a researcher-created the questionnaire based on Dalkir model of knowledge management cycle. Findings revealed that in all six dimensions of knowledge documentation, obtained means were less than intermediate level (3) and documentation status in all studied dimensions of Dal-kir’s model was not suitable.

Customer Equity is true representative of relationship marketing. There are two major approach-es to measure Customer Equity: Transaction/sales based approach and Attitudinal Approach. This research is an effort to check customer equity of fast food restaurants of Pakistan by using attitudinal approach. Transactional customer equity is treated as criterion for attitudinal customer equity. Three drivers of Customer Equity are Value Equity, Brand equity and Relationship equity are taken as independent variables in this research. Convenient sampling technique was used and sample size was 393 respondents. The results show that attitudinal customer equity had strong association with transactional equity. Brand equity, value equity and relationship equity show positive associations with attitudinal customer equity.

In-plane strength and constitutive properties of composite materials is known as crucial problems. Although, several studies have been made for obtaining the in-plane mode II properties, the common test fixtures are blind in confrontation of shear zone. Furthermore, toughening mechanisms and consequently mode II fracture toughness cannot be evaluated, precisely. Also, proposing the convenient configuration of shear test fixture increase the accuracy of evaluation for the shear-zone energy dissipation, especially in orthotropic materials. Hence in the present research, a novel shear fixture configuration is proposed based on Iosipesque structural modification. Hereof, some arbitrary composite materials (e.g. graphite/epoxy and wood) were studies on the basis of DOE and E-691 ASTM. Furthermore, as the numerical method for indicating the comparison of the uniform and non-uniform shear stress distribution in the modified and common shear test fixture, a statistical procedure is used based on ASTM standard in addition to FEM analysis. The obtained results reveal that applying major amendments through the new scheme of the shear test fixture, would provide a remarkable precision and a reasonable estimation of the shear strength in comparison with the previous Iosipesque experiments.

This paper is concerned with an overview of the Resource-Constrained Project Scheduling Problem (RCPSP) and the conventional meta-heuristic solution techniques that have attracted the attention of many researchers in the field. Therefore, researchers have developed algorithms and methods to solve the problem. This paper addresses the single-mode RCPSP where the objective is to optimize and minimize the project duration while the quantities of resources are constrained during the project execution. In this problem, resource constraints and precedence relationships between activities are known to be the most important constraints for project scheduling. In this context, the standard RCPSP is presented. Then, the classifications of the collected papers according to the year of publication and the different meta-heuristic approaches applied are presented. Five weighted articles and their meta-heuristic techniques developed for RCPSP are described in detail and their results are summarized in the corresponding tables. In addition, researchers have developed various conventional meta-heuristic algorithms such as genetic algorithms, particle swarm optimization, ant colony optimization, bee colony optimization, simulated annealing, evolutionary algorithms, and so on. It is stated that genetic algorithms are more popular among researchers than other meta-heuristics. For this reason, the various conventional meta-heuristics and their corresponding articles are also presented to give an overview of the conventional meta-heuristic optimizing techniques. Finally, the challenges of the conventional meta-heuristics are explored, which may be helpful for future studies to apply new suitable techniques to solve the Resource-Constrained Project Scheduling Problem (RCPSP).

Performance of mines can be affected by different factors such as safety and economic factors. This study aims to analyze the influence of safety and economic factors on mines’ performance. To this purpose, a framework is proposed based on a Data Envelopment Analysis (DEA), Ro-bust Data Envelopment Analysis (RDEA) and common weight Robust Data Envelopment Anal-ysis (CWRDEA) to determine the factors affecting on performance of mines. In this study, for the first time, integrated economic and safety factors are considered for evaluation of mines per-formance. To analyze safety and economic factors, this research gathers real data from a mine with 56 sites in south of Iran. Based on different DEA models, different sites become the best site among other sites, but RDEA is much closer to real situation than basic DEA and CWRDEA is the most efficient approach in real situation.

In this study, an ensemble algorithm has been proposed, called Quasi-Oppositional Symbiosis Organisms Search (QOSOS) algorithms, by incorporating the quasi-oppositional based learning (QOBL) strategy into the newly proposed Symbiosis Organisms Search (SOS) algorithm for solving unconstrained global optimization problems. The QOBL is incorporated into the basic SOS algorithm due to the balance of the exploration capability of QOBL and the exploitation potential of SOS algorithm. To validate the efficiency and robustness of the proposed Quasi-Oppositional Symbiosis Organisms Search (QOSOS) algorithms, it is applied to solve unconstrained global optimization problems. Also, the proposed QOSOS algorithm is applied to solve two real world global optimization problems. One is gas transmission compressor design optimization problem and another is optimal capacity of the gas production facilities optimization problem. The performance of the QOSOS algorithm is extensively evaluated and compares favorably with many progressive algorithms.

In this study, the effects of alkaline accelerating admixture and its dosage on cementitious material’s behavior at early ages were evaluated through a series of ultrasound Pulse echo measurements. Thus, those measurements consist on following the evolution of frequency dependent attenuation coefficient during cementitious material age. Four stages can be identified on the attenuation coefficient vs. mortar age graphs, indicating that the development of the attenuation parameter is closely related to the setting and the hardening phenomena. Also, the ultrasound histograms, representing the evolution of the different echoes backscattered by the media of the container, filled with cementitious material’s samples, were characterized in order to assess the attenuative effect of alkaline accelerator and its dosage during the setting and the hardening period. Thus, the combined use of ultrasound P-wave measured density and young modulus parameters results in a comprehensive ultrasound method that gives a more effective picture of the void volume and resistivity of the accelerated cementitious materials. Ultrasound P-waves were generated using a 1 MHz central frequency immersion transducer and mortar samples were prepared with Portland composite cement CPJ 45.

The objective of this paper was to have a study on the perceptions of stakeholders of Public-Private Partnership (PPP) projects for factors affecting the attractiveness of road projects in India. A questionnaire survey was conducted among major PPP project participants of Indian PPP road projects. Fifteen attractive factors were shortlisted through a literature survey for designing the questionnaire. Collected data was analyzed with factor analysis and descriptive statistical analysis. The findings resulted in three components: effectiveness of the private sector, effective time and cost management, and the public sector’s economic benefit. Eight factors were identified as highly affecting the attractiveness of PPP in Indian road projects. PPP provides ample diversity of net benefits to both the public and private sectors. During the project development stage, both sectors have to formulate decisions based on appropriate assessment criteria. Therefore, the reflection of attractive factors will assist the public-sector to select PPP in the road sector. It also helps to establish the strategy for road projects using PPP.

An effective safety management requires attention to human factors as well as system compo-nents which make risky or safe situations at technical components. This study evaluates and ana-lyze ergonomic behaviors in order to select the best work shift group in an Iranian process in-dustry, in 2010.The methodology was based on the Ergonomic Behavior Sampling (EBS), and TOPSIS method. After specifying the unergonomic behaviors and with reference to the results of a pilot study, a sample of 1755 was determined, with a sampling accuracy of 5% and confi-dence level of 95%. However, in order to gain more confidence, 2631 observations were collect-ed. The results indicate that 43.6% of workers’ behaviors were unergonomic. The most frequent unergonomic behavior was amusing of legs while load lifting with 83.01% of total unergonomic behaviors observations. Using TOPSIS method, the most effective shift group and the least at-tractive alternatives for intervention were selected in this company. Findings declare high number of unergonomic behaviors. Catastrophic consequences of accidents in petrochemical industry ne-cessitate attention to workers’ ergonomic behaviors in the workplace and promotion of them.

The revolutionary alterations and conversions occurring in information and communication technologies, have triggered an increase in the electronic commerce applications. Airline tickets are one of the most popular items purchased on the internet. The airline websites have become a big distribution channel for the companies to sustain their competitiveness. At this moment, the competition is increasing as airlines try to acquire and retain customers in the airline industry. To acquire and retain customers in such a highly competitive market, it is important for airlines to understand their relative levels of quality in terms of critical elements affecting their competitive advantages. In this study, an integrated two-stage multi-criteria decision-making techniques were used for the measurement of the performance of the airline websites using the Entropy Weight Method and the Grey Relational Analysis approach. The performance of 11 airline companies’ websites operating in Turkey was evaluated in terms of seven criteria. The data of quality website from airlines websites were taken more than 30 trails on various occasions on different periods of times. The data has been taken from 1 December 2016 to 31 December 2016. The weights of the attributes were calculated by Entropy Weight Method, the evaluation of the alternatives using the Grey Relational Analysis method were given ranking of websites.