This paper addresses the permutation flowshop scheduling problem with peak power consumption constraints (PFSPP). The real-time power consumption of the PFSPP cannot exceed a given peak power at any time. First, a mathematical model is established to describe the concerned problem. The sequence of operations is taken as a solution and the characteristics of solutions are analyzed. Based on the problem characteristics, eight heuristics are proposed, including balanced machine-job decoding method, balanced machine-job insert method, balanced job-machine insert method, balanced machine-job group insert method, balanced job-machine group insert method, greedy algorithm, beam search algorithm, and improved beam search algorithm. Similarly, the canonical artificial bee colony algorithm and iterated local search algorithm are modified based on the problem characteristics to solve the PFSPP. A large number of experiments are carried out to evaluate the performance of new proposed heuristics and metaheuristics. The results and discussion show that the proposed heuristics and metaheuristics perform well in solving the PFSPP.

We address a manufacturing environment with the no-wait constraint which is common in industries such as metal, plastic, and semiconductor. Setup times are modelled as uncertain with the objective of minimizing maximum lateness which is an important performance measure for customer satisfaction. This problem has been addressed in scheduling literature for the two-machine no-wait flowshop where dominance relations were presented. Recently, another dominance relation was presented and shown to be about 90% more efficient than the earlier ones. In the current paper, we propose two new dominance relations, which are less restrictive than the earlier ones in the literature. The new dominance relations are shown to be 140% more efficient than the most recent one in the literature. As the level of uncertainty increases, the newly proposed dominance relation performs better, which is another strength of the newly proposed dominance relation. Moreover, we also propose constructive heuristics and show that the best of the newly proposed heuristics is 95% more efficient than the existing one in the literature under the same CPU time.

The Quadratic Assignment Problem (QAP) is one of the classical combinatorial optimization problems and is known for its diverse applications. The QAP is an NP-hard optimization problem which attracts the use of heuristic or metaheuristic algorithms that can find quality solutions in an acceptable computation time. On the other hand, there is quite a broad spectrum of mathematical programming techniques that were developed for finding the lower bounds for the QAP. This paper presents a fusion of the two approaches whereby the solutions from the computations of the lower bounds are used as the starting points for a metaheuristic, called HC12, which is implemented on a GPU CUDA platform. We perform extensive computational experiments that demonstrate that the use of these lower bounding techniques for the construction of the starting points has a significant impact on the quality of the resulting solutions.

Bin packing problem (BPP) is a combinatorial optimization problem with a wide range of applications in fields such as financial budgeting, load balancing, project management, supply chain management. Harmony search algorithm (HSA) is widely used for various real-world and engineering problems due to its simplicity and efficient problem solving capability. Literature shows that basic HSA needs improvement in search capability as the performance of the algorithm degrades with increase in the problem complexity. This paper presents HSA with improved exploration and exploitation capability coupled with local iterative search based on random swap operator for solving BPP. The study uses the despotism based approach presented by Yadav et al. (2012) [Yadav P., Kumar R., Panda S.K., Chang, C. S. (2012). An intelligent tuned harmony search algorithm for optimisation. Information Sciences, 196, 47-72.] to divide Harmony memory (HM) into two categories which helps to maintain balance between exploration and exploitation. Secondly, local iterative search explores multiple neighborhoods by exponentially swapping components of solution vectors. A problem specific HM representation, HM re-initialization strategy and two adaptive PAR strategies are tested. The performance of proposed HSA is evaluated on 180 benchmark instances which consists of 100, 200 and 500 objects. Evaluation metrics such as best, mean, success rate, acceleration rate and improvement measures are used to compare HSA variations. The performance of the HSA with iterative local search outperforms other two variations of HSA.

In this paper, we consider a two-echelon supply chain in which one warehouse provides a single product to N retailers, using integer-ratio policies. Deterministic version of the problem has been widely studied. However, this assumption can lead to inaccurate and ineffective decisions. In this research, we tackle the stochastic version of two-echelon inventory system by designing an extension of a well-known heuristic. This research considers customer demands as following a normal density function. A set of 240 random instances was generated and used in evaluating both the deterministic and stochastic solution approaches. Due to the nature of the objective function, evaluation was carried out via Monte Carlo simulation. For variable demand settings, computational experiments shows that: i) the use of average demand to define the inventory policy implies an underestimation of the total cost and ii) the newly proposed method offers cost savings.

In this paper a mixed-integer linear programming (MILP) model is developed to be used as a decision support tool for the chemical company Perstorp Oxo AB. The intention with the mathematical model is to maximize the profit and the model can be used in the process of planning the supply chain for the company. Perstorp Oxo is classified as a global company in the process industry and is has production sites in Gent, Castellanza, Stenungsund and Perstorp. The site in Stenungsund is in focus in this paper. The company produces chemicals that later are used for example in textiles, plastic and glass production. Perstorp Oxo also uses inventories in other countries for enabling the selling abroad. It has two larger inventories in Antwerp and in Tees and two smaller in Philadelphia and in Aveiro. The larger facilities store five different products and the smaller take care of one type each. To be able to find feasible and profitable production plans for the company we have developed and implemented rolling horizon techniques for a time horizon of one year and used real sales data. The outcomes from the model show the transportation of products between different production sites, the different production rates, the levels of inventory, setups and purchases from external suppliers. The numerical results are promising and we conclude that a decision support tool based on an optimization model could improve the situation for the planners at Perstorp Oxo AB.

The Additive Manufacturing (AM) scheduling problem is becoming a very felt issue not only by the scholars but also by the practitioners who are looking to this new technology as a new integrated part of their traditional production systems. They need new scheduling models to adapt the traditional scheduling rules to the changed ones of the additive manufacturing. This paper deals with the enhancement of a scheduling problem for additive manufacturing just present in literature and the presentation of a new meta-heursitic (adapted to the new requirements of the additive manufacturing technology) based on the tabu-search algorithms.

This paper addresses the minimization of makespan for the permutation flow shop scheduling problem with blocking and sequence and machine dependent setup times, a problem not yet studied in previous studies. The 14 best known heuristics for the permutation flow shop problem with blocking and no setup times are pre-sented and then adapted to the problem in two different ways; resulting in 28 different heuristics. The heuristics are then compared using the Taillard database. As there is no other work that addresses the problem with blocking and sequence and ma-chine dependent setup times, a database for the setup times was created. The setup time value was uniformly distributed between 1% and 10%, 50%, 100% and 125% of the processing time value. Computational tests are then presented for each of the 28 heuristics, comparing the mean relative deviation of the makespan, the computational time and the percentage of successes of each method. Results show that the heuristics were capable of providing interesting results.

This paper studies the problem of scheduling a finite set of customers with stochastic service times for a single-server system. The objective is to minimize the waiting time of customers, the idle time of the server, and the lateness of the schedule. Because of the NP-hardness of the problem, the optimal schedule is notoriously hard to derive with reasonable computation times. Therefore, we develop a simulation based K-steps look-ahead selection method which can result in nearly optimal schedules within reasonable computation times. Furthermore, we study the different distributed service times, e.g., Exponential, Weibull and lognormal distribution and the results show that the proposed algorithm can obtain better results than the lag order approximation method proposed by Vink et al. (2015) [Vink, W., Kuiper, A., Kemper, B., & Bhulai, S. (2015). Optimal appointment scheduling in continuous time: The lag order approximation method. European Journal of Operational Research, 240(1), 213-219.]. Finally, a realistic appointment scheduling includes experiments to verify the good performance of the proposed method.

This article discusses the ecological vehicle routing problem with a stop at a refueling station titled Green-Vehicle Routing Problem. In this problem, the refueling stations and the limit of fuel tank capacity are considered for the construction of a tour. We propose a variable neighborhood search to solve the problem. We tested and compared the performance of our algorithm intensively on datasets existing in the literature.