9
How to cite this paper
APA: Kumar, R., Sahoo, A., Mishra, P., Das, R & Ukamanal, M. (2018). Experimental investigation on hard turning using mixed ceramic insert under accelerated cooling environment. International Journal of Industrial Engineering Computations, 9(4), 509-522.
Chicago/Turabian: Kumar, R., Sahoo, A., Mishra, P., Das, R & Ukamanal, M. 2018. "Experimental investigation on hard turning using mixed ceramic insert under accelerated cooling environment." International Journal of Industrial Engineering Computations 9, no. 4 (2018): 509-522.
AMA: Kumar, R., Sahoo, A., Mishra, P., Das, R & Ukamanal, M. Experimental investigation on hard turning using mixed ceramic insert under accelerated cooling environment. International Journal of Industrial Engineering Computations. 2018;9(4):509-522.
References
Aslantas, K., Ucun, I., & Cicek, A. (2012). Tool life and wear mechanism of coated and uncoated Al 2 O 3/TiCN mixed ceramic tools in turning hardened alloy steel. Wear, 274, 442-451.
Basak, S., Dixit, U. S., & Davim, J. P. (2007). Application of radial basis function neural networks in optimization of hard turning of AISI D2 cold-worked tool steel with a ceramic tool. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221(6), 987-998.
Chinchanikar, S., & Choudhury, S. K. (2014). Evaluation of chip-tool interface temperature: effect of tool coating and cutting parameters during turning hardened AISI 4340 steel. Procedia Materials Science, 6, 996-1005.
Chinchanikar, S., & Choudhury, S. K. (2015). Machining of hardened steel—experimental investigations, performance modeling and cooling techniques: a review. International Journal of Machine Tools and Manufacture, 89, 95-109.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.
Davim, J. P., & Figueira, L. (2007). Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques. Materials & design, 28(4), 1186-1191.
De Godoy, V. A. A., & Diniz, A. E. (2011). Turning of interrupted and continuous hardened steel surfaces using ceramic and CBN cutting tools. Journal of Materials processing technology, 211(6), 1014-1025.
Ferreira, R., Carou, D., Lauro, C. H., & Davim, J. P. (2016). Surface roughness investigation in the hard turning of steel using ceramic tools. Materials and Manufacturing Processes, 31(5), 648-652.
Gaitonde, V. N., Karnik, S. R., Figueira, L., & Davim, J. P. (2009). Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts. International Journal of Refractory Metals and Hard Materials, 27(4), 754-763.
Grzesik, W. (2008). Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools. Wear, 265(3), 327-335.
Grzesik, W., & Zalisz, Z. (2008). Wear phenomenon in the hard steel machining using ceramic tools. Tribology International, 41(8), 802-812.
Grzesik, W. (2009). Wear development on wiper Al 2 O 3–TiC mixed ceramic tools in hard machining of high strength steel. Wear, 266(9), 1021-1028.
Gupta, A. K. (2010). Predictive modelling of turning operations using response surface methodology, artificial neural networks and support vector regression. International Journal of Production Research, 48(3), 763-778.
Kumar, A. S., Durai, A. R., & Sornakumar, T. (2003). Machinability of hardened steel using alumina based ceramic cutting tools. International Journal of Refractory Metals and Hard Materials, 21(3), 109-117.
Liu, J., Han, R., & Sun, Y. (2005). Research on experiments and action mechanism with water vapor as coolant and lubricant in Green cutting. International Journal of Machine Tools and Manufacture, 45(6), 687-694.
Makadia, A. J., & Nanavati, J. I. (2013). Optimisation of machining parameters for turning operations based on response surface methodology. Measurement, 46(4), 1521-1529.
Mandal, N., Doloi, B., Mondal, B., & Das, R. (2011). Optimization of flank wear using Zirconia Toughened Alumina (ZTA) cutting tool: Taguchi method and Regression analysis. Measurement, 44(10), 2149-2155.
Mia, M., & Dhar, N. R. (2016). Prediction of surface roughness in hard turning under high pressure coolant using Artificial Neural Network. Measurement, 92, 464-474.
Mir, M., & Wani, M. (2018). Modelling and analysis of tool wear and surface roughness in hard turning of AISI D2 steel using response surface methodology. International Journal of Industrial Engineering Computations, 9(1), 63-74.
Mishra, P., Das, D., Ukamanal, M., Routara, B., & Sahoo, A. (2015). Multi-response optimization of process parameters using Taguchi method and grey relational analysis during turning AA 7075/SiC composite in dry and spray cooling environments. International Journal of Industrial Engineering Computations, 6(4), 445-456.
More, A. S., Jiang, W., Brown, W. D., & Malshe, A. P. (2006). Tool wear and machining performance of cBN–TiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel. Journal of Materials Processing Technology, 180(1), 253-262.
Özel, T., Karpat, Y., Figueira, L., & Davim, J. P. (2007). Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts. Journal of materials processing technology, 189(1), 192-198.
Pal, A., Choudhury, S. K., & Chinchanikar, S. (2014). Machinability assessment through experimental investigation during hard and soft turning of hardened steel. Procedia Materials Science, 6, 80-91.
Panda, A., Sahoo, A., & Rout, R. (2016). Multi-attribute decision making parametric optimization and modeling in hard turning using ceramic insert through grey relational analysis: A case study. Decision Science Letters, 5(4), 581-592.
Pavel, R., Marinescu, I., Deis, M., & Pillar, J. (2005). Effect of tool wear on surface finish for a case of continuous and interrupted hard turning. Journal of Materials Processing Technology, 170(1), 341-349.
Quiza, R., Figueira, L., & Davim, J. P. (2008). Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel. The International Journal of Advanced Manufacturing Technology, 37(7-8), 641-648.
Rout, A., Satapathy, A., Mantry, S., Sahoo, A., & Mohanty, T. (2012). Erosion wear performance analysis of polyester-gf-granite hybrid composites using the Taguchi method. Procedia Engineering, 38, 1863-1882.
Sahin, Y. (2009). Comparison of tool life between ceramic and cubic boron nitride (CBN) cutting tools when machining hardened steels. Journal of materials processing technology, 209(7), 3478-3489.
Sahoo, P., Barman, T. K., & Routara, B. C. (2008). Fractal dimension modelling of surface profile and optimisation in CNC end milling using response surface method. International Journal of Manufacturing Research, 3(3), 360-377.
Sahoo, A. K., & Sahoo, B. (2012). Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts. Measurement, 45(8), 2153-2165.
Sahoo, A. K., & Sahoo, B. (2013). Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-I (An experimental approach). Measurement, 46(8), 2854-2867.
Sahoo, A. K., & Sahoo, B. (2013). Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-II (RSM, grey relational and techno economical approach). Measurement, 46(8), 2868-2884.
Sahu, S. K., Mishra, P. C., Orra, K., & Sahoo, A. K. (2015). Performance assessment in hard turning of AISI 1015 steel under spray impingement cooling and dry environment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(2), 251-265.
Shalaby, M. A., El Hakim, M. A., Abdelhameed, M. M., Krzanowski, J. E., Veldhuis, S. C., & Dosbaeva, G. K. (2014). Wear mechanisms of several cutting tool materials in hard turning of high carbon–chromium tool steel. Tribology International, 70, 148-154.
Sharma, J., & Sidhu, B. S. (2014). Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil. Journal of Cleaner Production, 66, 619-623.
Neşeli, S., Yaldız, S., & Türkeş, E. (2011). Optimization of tool geometry parameters for turning operations based on the response surface methodology. Measurement, 44(3), 580-587.
Yallese, M. A., Rigal, J. F., Chaoui, K., & Boulanouar, L. (2005). The effects of cutting conditions on mixed ceramic and cubic boron nitride tool wear and on surface roughness during machining of X200Cr12 steel (60 HRC). Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 219(1), 35-55.
Basak, S., Dixit, U. S., & Davim, J. P. (2007). Application of radial basis function neural networks in optimization of hard turning of AISI D2 cold-worked tool steel with a ceramic tool. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 221(6), 987-998.
Chinchanikar, S., & Choudhury, S. K. (2014). Evaluation of chip-tool interface temperature: effect of tool coating and cutting parameters during turning hardened AISI 4340 steel. Procedia Materials Science, 6, 996-1005.
Chinchanikar, S., & Choudhury, S. K. (2015). Machining of hardened steel—experimental investigations, performance modeling and cooling techniques: a review. International Journal of Machine Tools and Manufacture, 89, 95-109.
Das, S. R., Dhupal, D., & Kumar, A. (2015). Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool. Measurement, 62, 108-126.
Davim, J. P., & Figueira, L. (2007). Machinability evaluation in hard turning of cold work tool steel (D2) with ceramic tools using statistical techniques. Materials & design, 28(4), 1186-1191.
De Godoy, V. A. A., & Diniz, A. E. (2011). Turning of interrupted and continuous hardened steel surfaces using ceramic and CBN cutting tools. Journal of Materials processing technology, 211(6), 1014-1025.
Ferreira, R., Carou, D., Lauro, C. H., & Davim, J. P. (2016). Surface roughness investigation in the hard turning of steel using ceramic tools. Materials and Manufacturing Processes, 31(5), 648-652.
Gaitonde, V. N., Karnik, S. R., Figueira, L., & Davim, J. P. (2009). Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts. International Journal of Refractory Metals and Hard Materials, 27(4), 754-763.
Grzesik, W. (2008). Influence of tool wear on surface roughness in hard turning using differently shaped ceramic tools. Wear, 265(3), 327-335.
Grzesik, W., & Zalisz, Z. (2008). Wear phenomenon in the hard steel machining using ceramic tools. Tribology International, 41(8), 802-812.
Grzesik, W. (2009). Wear development on wiper Al 2 O 3–TiC mixed ceramic tools in hard machining of high strength steel. Wear, 266(9), 1021-1028.
Gupta, A. K. (2010). Predictive modelling of turning operations using response surface methodology, artificial neural networks and support vector regression. International Journal of Production Research, 48(3), 763-778.
Kumar, A. S., Durai, A. R., & Sornakumar, T. (2003). Machinability of hardened steel using alumina based ceramic cutting tools. International Journal of Refractory Metals and Hard Materials, 21(3), 109-117.
Liu, J., Han, R., & Sun, Y. (2005). Research on experiments and action mechanism with water vapor as coolant and lubricant in Green cutting. International Journal of Machine Tools and Manufacture, 45(6), 687-694.
Makadia, A. J., & Nanavati, J. I. (2013). Optimisation of machining parameters for turning operations based on response surface methodology. Measurement, 46(4), 1521-1529.
Mandal, N., Doloi, B., Mondal, B., & Das, R. (2011). Optimization of flank wear using Zirconia Toughened Alumina (ZTA) cutting tool: Taguchi method and Regression analysis. Measurement, 44(10), 2149-2155.
Mia, M., & Dhar, N. R. (2016). Prediction of surface roughness in hard turning under high pressure coolant using Artificial Neural Network. Measurement, 92, 464-474.
Mir, M., & Wani, M. (2018). Modelling and analysis of tool wear and surface roughness in hard turning of AISI D2 steel using response surface methodology. International Journal of Industrial Engineering Computations, 9(1), 63-74.
Mishra, P., Das, D., Ukamanal, M., Routara, B., & Sahoo, A. (2015). Multi-response optimization of process parameters using Taguchi method and grey relational analysis during turning AA 7075/SiC composite in dry and spray cooling environments. International Journal of Industrial Engineering Computations, 6(4), 445-456.
More, A. S., Jiang, W., Brown, W. D., & Malshe, A. P. (2006). Tool wear and machining performance of cBN–TiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel. Journal of Materials Processing Technology, 180(1), 253-262.
Özel, T., Karpat, Y., Figueira, L., & Davim, J. P. (2007). Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts. Journal of materials processing technology, 189(1), 192-198.
Pal, A., Choudhury, S. K., & Chinchanikar, S. (2014). Machinability assessment through experimental investigation during hard and soft turning of hardened steel. Procedia Materials Science, 6, 80-91.
Panda, A., Sahoo, A., & Rout, R. (2016). Multi-attribute decision making parametric optimization and modeling in hard turning using ceramic insert through grey relational analysis: A case study. Decision Science Letters, 5(4), 581-592.
Pavel, R., Marinescu, I., Deis, M., & Pillar, J. (2005). Effect of tool wear on surface finish for a case of continuous and interrupted hard turning. Journal of Materials Processing Technology, 170(1), 341-349.
Quiza, R., Figueira, L., & Davim, J. P. (2008). Comparing statistical models and artificial neural networks on predicting the tool wear in hard machining D2 AISI steel. The International Journal of Advanced Manufacturing Technology, 37(7-8), 641-648.
Rout, A., Satapathy, A., Mantry, S., Sahoo, A., & Mohanty, T. (2012). Erosion wear performance analysis of polyester-gf-granite hybrid composites using the Taguchi method. Procedia Engineering, 38, 1863-1882.
Sahin, Y. (2009). Comparison of tool life between ceramic and cubic boron nitride (CBN) cutting tools when machining hardened steels. Journal of materials processing technology, 209(7), 3478-3489.
Sahoo, P., Barman, T. K., & Routara, B. C. (2008). Fractal dimension modelling of surface profile and optimisation in CNC end milling using response surface method. International Journal of Manufacturing Research, 3(3), 360-377.
Sahoo, A. K., & Sahoo, B. (2012). Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts. Measurement, 45(8), 2153-2165.
Sahoo, A. K., & Sahoo, B. (2013). Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-I (An experimental approach). Measurement, 46(8), 2854-2867.
Sahoo, A. K., & Sahoo, B. (2013). Performance studies of multilayer hard surface coatings (TiN/TiCN/Al2O3/TiN) of indexable carbide inserts in hard machining: Part-II (RSM, grey relational and techno economical approach). Measurement, 46(8), 2868-2884.
Sahu, S. K., Mishra, P. C., Orra, K., & Sahoo, A. K. (2015). Performance assessment in hard turning of AISI 1015 steel under spray impingement cooling and dry environment. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(2), 251-265.
Shalaby, M. A., El Hakim, M. A., Abdelhameed, M. M., Krzanowski, J. E., Veldhuis, S. C., & Dosbaeva, G. K. (2014). Wear mechanisms of several cutting tool materials in hard turning of high carbon–chromium tool steel. Tribology International, 70, 148-154.
Sharma, J., & Sidhu, B. S. (2014). Investigation of effects of dry and near dry machining on AISI D2 steel using vegetable oil. Journal of Cleaner Production, 66, 619-623.
Neşeli, S., Yaldız, S., & Türkeş, E. (2011). Optimization of tool geometry parameters for turning operations based on the response surface methodology. Measurement, 44(3), 580-587.
Yallese, M. A., Rigal, J. F., Chaoui, K., & Boulanouar, L. (2005). The effects of cutting conditions on mixed ceramic and cubic boron nitride tool wear and on surface roughness during machining of X200Cr12 steel (60 HRC). Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 219(1), 35-55.