How to cite this paper
Oyinbo, S., Jen, T & Ismail, S. (2020). Effect of frictional boundary conditions and percentage area reduction on the extrusion pressure of Aluminum AA6063 alloy using FE analysis modelling.Engineering Solid Mechanics, 8(3), 205-214.
Refrences
Ajiboye, J. S., & Adeyemi, M. B. (2007). The effect of selected parameters on temperature distribution in axi-symmetric extrusion process. Journal of Mechanical Science and Technology, 21(10), 1553–1559. https://doi.org/10.1007/BF03177374
Ajiboye, J.S., & Adeyemi, M. B. (2008). Effects of extrusion variables on temperature distribution in axisymmetric extrusion process. International Journal of Mechanical Sciences, 50(3), 522–537. https://doi.org/10.1016/J.IJMECSCI.2007.08.006
Ajiboye, J.S., & Oyinbo, S. T. (2014). Load Prediction for the Extrusion from Circular Billet to Symmetric and Asymmetric Polygons Using Linearly Converging Die Profiles. Key Engineering Materials, 622–623, 119–128. https://doi.org/10.4028/www.scientific.net/KEM.622-623.119
Ajiboye, Joseph S., Adebayo, S. A., & Azeez, T. M. (2014). Effects of lubricant on the mechanical properties of aluminum 6063 alloy after ECAE. Industrial Lubrication and Tribology, 66(3), 360–364. https://doi.org/10.1108/ilt-10-2011-0076
Alam, M. S., Kaur, J., Khaira, H., & Gupta, K. (2016). Extrusion and Extruded Products: Changes in Quality Attributes as Affected by Extrusion Process Parameters: A Review. Critical Reviews in Food Science and Nutrition, 56(3), 445–473. https://doi.org/10.1080/10408398.2013.779568
Altinbalik, T., & Ayer, O. (2013). Effect of die inlet geometry on extrusion of clover sections through curved dies: Upper bound analysis and experimental verification. Transactions of Nonferrous Metals Society of China (English Edition), 23(4), 1098–1107. https://doi.org/10.1016/S1003-6326(13)62571-6
DEFORM TM 3D Version 6.1. (2008). In (sp2), User’sManual Scientific FormingTechnologiesCorporation, 2545 Farmers Drive, Suite200, Columbus, Ohio, 43235.
Flitta, I., Sheppard, T., & Peng, Z. (2007). FEM analysis to predict development of structure during extrusion and subsequent solution soak cycle. Materials Science and Technology, 23(5), 582–592. https://doi.org/10.1179/174328407X158668
Ikumapayi, O.M., Oyinbo, S. T., Bodunde, O. P., Afolalu, S. A., Okokpujie, I. P., & Akinlabi, E. T. (2019). The effects of lubricants on temperature distribution of 6063 aluminium alloy during backward cup extrusion process. Journal of Materials Research and Technology, 8(1). https://doi.org/10.1016/j.jmrt.2018.08.006
Maity, K. P., Kar, P. K., & Das, N. S. (1996). A class of upper-bound solutions for the extrusion of square shapes from square billets through curved dies. Journal of Materials Processing Technology, 62(1–3), 185–190. https://doi.org/10.1016/0924-0136(95)02228-7
Ojo, S. O., Erinosho M., & Ajiboye, J. S. (2015). Experimental Analysis for Lubricant and Punch Selection in Shear Extrusion of Aa-6063. J Material Sci Eng, 4(4), 174. https://doi.org/10.4172/2169-0022.1000174
Onawola, O. O., & Adeyemi, M. B. (2003). Warm compression and extrusion tests of aluminium. Journal of Materials Processing Technology, 136(1–3), 7–11. https://doi.org/10.1016/S0924-0136(02)00462-4
Oyinbo, S. T., Ikumapayi, O. M., Ajiboye, J. S., & Afolalu, S. A. (2015). Numerical Simulation of Axisymmetric and Asymmetric Extrusion Process Using Finite Element Method. International Journal of Scientific & Engineering Research, 6(6).
Rasti, J., Najafizadeh, A., & Meratian, M. (2011). Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method. International Journal of ISSI, 8(1), 26–33. Retrieved from http://journal.issiran.com/article_6374_44b99e06e066fa7ee24705f05935b39d.pdf
Rout, A. K., Maity, K., & Sahoo, S. K. (2017). FEM Modeling of Extrusion of Square Billet to Square Product Through Cosine Dies. Journal of The Institution of Engineers (India): Series C, 98(2), 91–96. https://doi.org/10.1007/s40032-016-0245-x
Solomon, N., & Solomon, I. (2010). Effect of die shape on the metal flow pattern during direct extrusion process. Revista de Metalurgia, 46(5), 396–404. https://doi.org/10.3989/revmetalm.0928
Zhang, Z. J., Dai, G. Z., Wu, S. N., Dong, L. X., & Liu, L. L. (2009). Simulation of 42CrMo steel billet upsetting and its defects analyses during forming process based on the software DEFORM-3D. Materials Science and Engineering A, 499(1–2), 49–52. https://doi.org/10.1016/j.msea.2007.11.135
Ajiboye, J.S., & Adeyemi, M. B. (2008). Effects of extrusion variables on temperature distribution in axisymmetric extrusion process. International Journal of Mechanical Sciences, 50(3), 522–537. https://doi.org/10.1016/J.IJMECSCI.2007.08.006
Ajiboye, J.S., & Oyinbo, S. T. (2014). Load Prediction for the Extrusion from Circular Billet to Symmetric and Asymmetric Polygons Using Linearly Converging Die Profiles. Key Engineering Materials, 622–623, 119–128. https://doi.org/10.4028/www.scientific.net/KEM.622-623.119
Ajiboye, Joseph S., Adebayo, S. A., & Azeez, T. M. (2014). Effects of lubricant on the mechanical properties of aluminum 6063 alloy after ECAE. Industrial Lubrication and Tribology, 66(3), 360–364. https://doi.org/10.1108/ilt-10-2011-0076
Alam, M. S., Kaur, J., Khaira, H., & Gupta, K. (2016). Extrusion and Extruded Products: Changes in Quality Attributes as Affected by Extrusion Process Parameters: A Review. Critical Reviews in Food Science and Nutrition, 56(3), 445–473. https://doi.org/10.1080/10408398.2013.779568
Altinbalik, T., & Ayer, O. (2013). Effect of die inlet geometry on extrusion of clover sections through curved dies: Upper bound analysis and experimental verification. Transactions of Nonferrous Metals Society of China (English Edition), 23(4), 1098–1107. https://doi.org/10.1016/S1003-6326(13)62571-6
DEFORM TM 3D Version 6.1. (2008). In (sp2), User’sManual Scientific FormingTechnologiesCorporation, 2545 Farmers Drive, Suite200, Columbus, Ohio, 43235.
Flitta, I., Sheppard, T., & Peng, Z. (2007). FEM analysis to predict development of structure during extrusion and subsequent solution soak cycle. Materials Science and Technology, 23(5), 582–592. https://doi.org/10.1179/174328407X158668
Ikumapayi, O.M., Oyinbo, S. T., Bodunde, O. P., Afolalu, S. A., Okokpujie, I. P., & Akinlabi, E. T. (2019). The effects of lubricants on temperature distribution of 6063 aluminium alloy during backward cup extrusion process. Journal of Materials Research and Technology, 8(1). https://doi.org/10.1016/j.jmrt.2018.08.006
Maity, K. P., Kar, P. K., & Das, N. S. (1996). A class of upper-bound solutions for the extrusion of square shapes from square billets through curved dies. Journal of Materials Processing Technology, 62(1–3), 185–190. https://doi.org/10.1016/0924-0136(95)02228-7
Ojo, S. O., Erinosho M., & Ajiboye, J. S. (2015). Experimental Analysis for Lubricant and Punch Selection in Shear Extrusion of Aa-6063. J Material Sci Eng, 4(4), 174. https://doi.org/10.4172/2169-0022.1000174
Onawola, O. O., & Adeyemi, M. B. (2003). Warm compression and extrusion tests of aluminium. Journal of Materials Processing Technology, 136(1–3), 7–11. https://doi.org/10.1016/S0924-0136(02)00462-4
Oyinbo, S. T., Ikumapayi, O. M., Ajiboye, J. S., & Afolalu, S. A. (2015). Numerical Simulation of Axisymmetric and Asymmetric Extrusion Process Using Finite Element Method. International Journal of Scientific & Engineering Research, 6(6).
Rasti, J., Najafizadeh, A., & Meratian, M. (2011). Correcting the stress-strain curve in hot compression test using finite element analysis and Taguchi method. International Journal of ISSI, 8(1), 26–33. Retrieved from http://journal.issiran.com/article_6374_44b99e06e066fa7ee24705f05935b39d.pdf
Rout, A. K., Maity, K., & Sahoo, S. K. (2017). FEM Modeling of Extrusion of Square Billet to Square Product Through Cosine Dies. Journal of The Institution of Engineers (India): Series C, 98(2), 91–96. https://doi.org/10.1007/s40032-016-0245-x
Solomon, N., & Solomon, I. (2010). Effect of die shape on the metal flow pattern during direct extrusion process. Revista de Metalurgia, 46(5), 396–404. https://doi.org/10.3989/revmetalm.0928
Zhang, Z. J., Dai, G. Z., Wu, S. N., Dong, L. X., & Liu, L. L. (2009). Simulation of 42CrMo steel billet upsetting and its defects analyses during forming process based on the software DEFORM-3D. Materials Science and Engineering A, 499(1–2), 49–52. https://doi.org/10.1016/j.msea.2007.11.135