How to cite this paper
Ikumapayi, O., Akinlabi, E., Sharma, A., Sharma, V & Oladijo, O. (2020). Tribological, structural and mechanical characteristics of friction stir processed aluminium-based matrix composites reinforced with stainless steel micro-particles.Engineering Solid Mechanics, 8(3), 253-270.
Refrences
Akbari, M., Aliha, M. R. M., Keshavarz, S. M. E., & Bonyadi, A. (2019). Effect of tool parameters on mechanical properties, temperature, and force generation during FSW. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(6), 1033-1043.
Akbari, M., Shojaeefard, M. H., Asadi, P., & Khalkhali, A. (2017). Hybrid multi-objective optimization of microstructural and mechanical properties of B4C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II. Transactions of Nonferrous Metals Society of China, 27(11), 2317-2333.
Aliha, M. R. M., Shahheidari, M., Bisadi, M., Akbari, M., & Hossain, S. (2016). Mechanical and metallurgical properties of dissimilar AA6061-T6 and AA7277-T6 joint made by FSW technique. The International Journal of Advanced Manufacturing Technology, 86(9-12), 2551-2565.
Asadi, P., Givi, M. B., Rastgoo, A., Akbari, M., Zakeri, V., & Rasouli, S. (2012). Predicting the grain size and hardness of AZ91/SiC nanocomposite by artificial neural networks. The International Journal of Advanced Manufacturing Technology, 63(9-12), 1095-1107.
Asuke, F., Abdulwahab, M., Aigbodion, V. S., Fayomi, O. S. I., & Aponbiede, O. (2014). Effect of load on the wear behaviour of polypropylene/carbonized bone ash particulate composite. Egyptian Journal of Basic and Applied Sciences, 1(1), 67–70.
Baruwa, A. D., Oladijo, O. P., Maledi, N., & Akinlabi, E. T. (2018). Influence of surface treatment on dry sliding wear behavior of hydrophobic silane coating on AISI 304. IOP Conference Series: Materials Science and Engineering, 423, 012158.
Behnagh, R. A., Besharati Givi, M. K., & Akbari, M. (2012). Mechanical properties, corrosion resistance, and microstructural changes during friction stir processing of 5083 aluminum rolled plates. Materials and manufacturing processes, 27(6), 636-640.
Bhaskar, K. V., Sundarrajan, S., Rao, B. S., & Ravindra, K. (2018). Effect of reinforcement and wear parameters on dry sliding wear of Aluminum composites-A review. Materials Today: Proceedings, 5(2), 5891–5900.
Boromei, I., Ceschini, L., Morri, A., & Garagnani, G. L. (2006). Friction stir weldiong of Aluminium based composites reinforced with Al2O3 particles: Effects on microstructure. Metallurgical Science and Technology, 24(1), 12–21.
Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., & Han, H. N. (2018). Joining and fabrication of metal matrix composites by friction stir welding/processing. International Journal of Precision Engineering and Manufacturing-Green Technology, 5(1), 151–172.
Deuis, R. L., Subramanian, C., & Yellup, J. M. (1997). Sliding wear of aluminum composites-A review. Composites Science and Technology, 3538(96), 415–435.
Dinaharan, I, Kalaiselvan, K., Akinlabi, E. T., & Davim, J. P. (2017a). Microstructure and wear characterization of rice husk ash reinforced copper matrix composites prepared using friction stir processing. Journal of Alloys and Compounds, 718, 150–160.
Dinaharan, I., Kalaiselvan, K., & Murugan, N. (2017b). Influence of rice husk ash particles on microstructure and tensile behavior of AA6061 aluminum matrix composites produced using friction stir processing. Composites Communications, 3, 42-46.
Erinosho, M. F., Akinlabi, E. T., Pityana, S., Owolabi, G., Park, A., Campus, K., … Africa, S. (2017). Laser surface modification of Ti6Al4V-Cu for improved microhardness and wear resistance properties. Materials Research., 20(4), 1143–1152.
Fatchurrohman, N., Farhana, N., & Marini, C. D. (2018). Investigation on the effect of Friction Stir Processing Parameters on Micro-structure and Micro-hardness of Rice Husk Ash reinforced Al6061 Metal Matrix Composites. IOP Conference Series: Materials Science and Engineering, 319(1), 0–6.
Feng, A. H., Chen, D. L., & Ma, Z. Y. (2010). Microstructure and cyclic deformation behavior of a friction-stir-welded 7075 al alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41(4), 957–971.
Garcia, C., Azpilgain, Z., Aginagalde, A., Esnaola, J. A., Galdos, L., & Torca, I. (2009). Tensile behaviour of 6082 Aluminium alloy sheet under different conditions of heat treatment, temperature and strain rate. Key Engineering Materials, 423(February), 105–112.
Gerlich, A. P. (2017). Critical Assessment 25 : Friction stir processing , potential and problems Critical Assessment. Materials Science and Technology, 33(10), 1139–1144.
Hao, Z., Fu, X., Men, X., & Zhou, B. (2019). Study on tensile and fracture properties of 7050-T7451 aluminum alloy based on material forming texture characteristics. Materials Research Express, 6(3).
Huang, G., Hou, W., & Shen, Y. (2018). Evaluation of the microstructure and mechanical properties of WC particle reinforced aluminum matrix composites fabricated by friction stir processing. Materials Characterization, 138(November 2017), 26–37.
Ikumapayi, O M, Ojolo, S. J., & Afolalu, S. A. (2015). Experimental and theoretical investigation of tensile stress distribution during Aluminium wire drawing. European Scientific Journal, 11(18), 1857–7881. h
Ikumapayi, O. M., Okokpujie, I. P., Afolalu, S. A., Ajayi, O. O., Akilabi, E. T., & Bodunde, O. P. (2018). Effects of quenchants on impact strength of single-vee butt welded joint of mild steel. IOP Conference Series: Materials Science and Engineering, 391, 1–10.
Ikumapayi, OM, Akinlabi, Esther T and Majumdar, J. D. (2019a). Influence of carbonaceous agrowastes nanoparticles on physical and mechanical properties of friction stir processed AA7075-T651 metal matrix composites. Surface Topography: Metrology and Properties, 7(3), 1–17.
Ikumapayi, OM; Akinlabi, ET; Majumdar, JD; Akinlabi, S. (2019b). Characterization of high strength Aluminium – based surface matrix composite reinforced with low-cost PKSA fabricated by friction stir processing. Materials Research Express, 6, 1–27.
Ikumapayi, Omolayo M, & Akinlabi, E. T. (2019). Experimental Data on Surface Roughness and Force Feedback Analysis in Friction Stir Processed AA7075 – T651 Aluminium Metal Composites. Data in Brief, https://doi.org/10.1016/j.dib.2019.103710.
Ikumapayi, Omolayo M, Akinlabi, E. T., & Majumdar, J. D. (2018a). Review on thermal, thermo- mechanical and thermal stress distribution during friction stir welding. International Journal of Mechanical Engineering and Technology, 9(8), 534–548.
Ikumapayi, Omolayo M, Akinlabi, E. T., Pal, S. K., & Majumdar, J. D. (2019c). A survey on reinforcements used during friction stir processing of Aluminium metal matrix hybrid composites. Procedia Manufacturing, 35, 935–940.
Ikumapayi, Omolayo M., & Akinlabi, E. T. (2019). Efficacy of α-β Grade titanium alloy powder (Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.25Si) in surface modification and corrosion mitigation in 3.5% NaCl on friction stir processed armour grade 7075-T651 aluminum alloys - Insight in defence applications. Materials Research Express, 6(7), 3–8.
Ikumapayi, Omolayo M., Oyinbo, S. T., Bodunde, O. P., Afolalu, S. A., Okokpujie, I. P., & Akinlabi, E. T. (2018b). The effects of lubricants on temperaturedistribution of 6063 aluminium alloy duringbackward cup extrusion process. Journal of Materials Research and Technology, 8(1), 1175–1187.
Jain, S., Sharma, N., & Gupta, R. (2018). Dissimilar alloys (AA6082/AA5083) joining by FSW and parametric optimization using Taguchi, grey relational and weight method. Engineering Solid Mechanics, 6(1), 51-66.
Jain, V. K. S., Muhammed, P. M., Muthukumaran, S., & Babu, S. P. K. (2018). Microstructure, mechanical and sliding wear behavior of AA5083–B4C/SiC/TiC surface composites fabricated using friction stir processing. Transactions of the Indian Institute of Metals, 71(6), 1519–1529.
Jeyaprakash, N., Yang, C., Duraiselvam, M., & Prabu, G. (2019). Microstructure and tribological evolution during laser alloying WC-12 % Co and Cr 3 C 2 − 25 % NiCr powders on nodular iron surface. Results in Physics, 12(December 2018), 1610–1620.
Johannes, L. B., & Mishra, R. S. (2007). Multiple passes of friction stir processing for the creation of superplastic 7075 aluminum. Materials Science and Engineering A, 464(1–2), 255–260.
Kishan, V., Devaraju, A., & Prasanna Lakshmi, K. (2018). Tribological properties of nano TiB2particle reinforced 6061-T6 Aluminum alloy surface composites via friction stir processing. Materials Today: Proceedings, 5(1), 1615–1619.
Koli, D. K., Agnihotri, G., & Purohit, R. (2014). A Review on Properties, Behaviour and Processing Methods for Al- Nano Al2O3 Composites. Procedia Materials Science, 6(Icmpc), 567–589.
Kubit, A., Kluz, R., Trzepieciński, T., Wydrzyński, D., & Bochnowski, W. (2018). Analysis of the mechanical properties and of micrographs of refill friction stir spot welded 7075-T6 aluminium sheets. Archives of Civil and Mechanical Engineering, 18(1), 235–244.
Kumar, K., Gulati, P., Gupta, A., & Shukla, D. K. (2017). A review of friction stir processing of aluminium alloys using different types of reinforcements. Int. J. Mech. Eng. Technol, 8(7), 1638-1651.
Kumar, P., & Wani, M. F. (2017). Friction and wear behaviour of hypereutectic Al-Si alloy / steel tribopair under dry and lubricated conditions, 15(June), 21–49.
Kundu, J., & Singh, H. (2017). Friction stir welding process: An investigation of microstructure and mechanical properties of Al Alloy AlMg4. 5Mn joint. Engineering Solid Mechanics, 5(2), 145-154.
Kurgan, N. (2014). Investigation of the effect of diffusion bonding parameters on microstructure and mechanical properties of 7075 aluminium alloy. The International Journal of Advanced Manufacturing Technology, 71(9–12), 2115–2124.
Mishra, R. S., & Ma, Z. Y. (2005). Friction stir welding and processing. Materials Science and Engineering R: Reports, 50(1–2), 1–78.
Mishra, Rajiv Sharan, De, P. S., & Kumar, N. (2014). Friction Stir Welding and Processing. https://doi.org/10.1007/978-3-319-07043-8
Mistry, J. M., & Gohil, P. P. (2017). An overview of diversified reinforcement on aluminum metal matrix composites: Tribological aspects. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231(3), 399–421.
Narasimharaju, S., & Sankunny, S. (2019). Microstructure and fracture behavior of friction stir lap welding of dissimilar AA 6060-T5/Pure copper. Engineering Solid Mechanics, 7(3), 217-228.
Navaneethakrishnan, T., & Ganesh, P. (2015). Effect of welding parameters on friction stir welded dissimilar aluminum alloys 7075 and 6082 with various tool pin profiles. Journal of Chemical and Pharmaceutical Sciences, 2015-April(9), 463–468.
Offor, P. O., Okorie, B. A., Ezema, F. I., Aigbodion, V. S., & Daniel-mkpume, C. C. (2015). Synthesis and characterization of nanocrystalline zinc sulphide thin fi lms by chemical spray pyrolysis. Journal of Alloys and Compounds, 650, 381–385.
Padhy, G. K., Wu, C. S., & Gao, S. (2017). Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review. Journal of Materials Science and Technology, 34, 1–38.
Pandey, V., Singh, J. K., Chattopadhyay, K., Srinivas, N. C. S., & Singh, V. (2017). Influence of ultrasonic shot peening on corrosion behavior of 7075 aluminum alloy. Journal of Alloys and Compounds, 723, 826–840.
Patel, V. V., Badheka, V., & Kumar, A. (2017). Effect of polygonal pin profiles on friction stir processed superplasticity of AA7075 alloy. Journal of Materials Processing Technology, 240, 68–76.
Rambabu, P., Prasad, N. E., & Kutumbarao, V. V. (2017). Aerospace materials and material technologies. https://doi.org/10.1007/978-981-10-2143-5
Rana, H. G., Badheka, V. J., & Kumar, A. (2016). Fabrication of Al7075 / B4C Surface Composite by Novel Friction Stir Processing (FSP) and Investigation on Wear Properties. Procedia Technology, 23, 519–528.
Sanusi, K. O., & Akinlabi, E. T. (2017). Friction-stir processing of a composite aluminium alloy (AA 1050) reinforced with titanium carbide powder. Materiali in Tehnologije, 51(3), 427–435.
Selvakumar, S., Dinaharan, I., Palanivel, R., & Babu, B. G. (2017). Development of stainless steel particulate reinforced AA6082 aluminum matrix composites with enhanced ductility using friction stir processing. Materials Science and Engineering A, 685(January), 317–326.
Sert, A., & Celik, O. N. (2014). Wear behavior of SiC-reinforced surface composite Al7075-T651 aluminum alloy produced using friction stir processing. Indian Journal of Engineering & Materials Sciences, 21(February), 35–43.
Shahraki, S., Khorasani, S., Behnagh, R. A., Fotouhi, Y., & Bisadi, H. (2013). Producing of AA5083/ZrO 2 nanocomposite by friction stir processing (FSP). Metallurgical and Materials Transactions B, 44(6), 1546-1553.
Sharma, A., Sharma, V. M., Sahoo, B., Joseph, J., & Paul, J. (2018). Study of nano-mechanical, electrochemical and raman spectroscopic behavior of Al6061-SiC-Graphite hybrid surface composite fabricated through friction stir processing. Journal of Composites Science, 2(32), 1–17.
Sharma, V., Prakash, U., & Kumar, B. V. M. (2015). Surface composites by friction stir processing: A review. Journal of Materials Processing Technology, 224, 117–134.
Shojaeefard, M. H., Akbari, M., Asadi, P., & Khalkhali, A. (2017). The effect of reinforcement type on the microstructure, mechanical properties, and wear resistance of A356 matrix composites produced by FSP. The International Journal of Advanced Manufacturing Technology, 91(1-4), 1391-1407.
Sudhakar, D., Jeyasimman, D., & Duraiselvam, M. (2015). Dry sliding wear behavior of Cr 3 C 2 -NiCr coating on austenitic stainless steel. International Journal Of Core Engineering & Management, 1(12), 215–225.
Sudhakar, I., Madhu, V., Madhusudhan Reddy, G., & Srinivasa Rao, K. (2015). Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing. Defence Technology, 11(1), 10–17.
Sudhakar, I., Madhusudhan Reddy, G., & Srinivasa Rao, K. (2016). Ballistic behavior of boron carbide reinforced AA7075 aluminium alloy using friction stir processing – An experimental study and analytical approach. Defence Technology, 12(1), 25–31.
Taheri-Behrooz, F., Aliha, M. R., Maroofi, M., & Hadizadeh, V. (2018). Residual stresses measurement in the butt joint welded metals using FSW and TIG methods. Steel and Composite Structures, 28(6), 759-766.
Torabi, A. R., Kalantari, M. H., & Aliha, M. R. M. (2018). Fracture analysis of dissimilar Al‐Al friction stir welded joints under tensile/shear loading. Fatigue & Fracture of Engineering Materials & Structures, 41(9), 2040-2053.
Torabi, A. R., Kalantari, M. H., Aliha, M. R. M., & Ghoreishi, S. M. N. (2019). Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion. Theoretical and Applied Fracture Mechanics, 104, 102369.
Vasco, M., Tserpes, K., & Pantelakis, S. (2018). Numerical simulation of tensile behavior of corroded Aluminum alloy 2024 T3 considering the hydrogen embrittlement. Metals, 8(1), 56.
Vijaya Kumar, P., Madhusudhan Reddy, G., & Srinivasa Rao, K. (2015). Microstructure and pitting corrosion of armor grade AA7075 aluminum alloy friction stir weld nugget zone – Effect of post weld heat treatment and addition of boron carbide. Defence Technology, 11(2), 166–173.
Akbari, M., Shojaeefard, M. H., Asadi, P., & Khalkhali, A. (2017). Hybrid multi-objective optimization of microstructural and mechanical properties of B4C/A356 composites fabricated by FSP using TOPSIS and modified NSGA-II. Transactions of Nonferrous Metals Society of China, 27(11), 2317-2333.
Aliha, M. R. M., Shahheidari, M., Bisadi, M., Akbari, M., & Hossain, S. (2016). Mechanical and metallurgical properties of dissimilar AA6061-T6 and AA7277-T6 joint made by FSW technique. The International Journal of Advanced Manufacturing Technology, 86(9-12), 2551-2565.
Asadi, P., Givi, M. B., Rastgoo, A., Akbari, M., Zakeri, V., & Rasouli, S. (2012). Predicting the grain size and hardness of AZ91/SiC nanocomposite by artificial neural networks. The International Journal of Advanced Manufacturing Technology, 63(9-12), 1095-1107.
Asuke, F., Abdulwahab, M., Aigbodion, V. S., Fayomi, O. S. I., & Aponbiede, O. (2014). Effect of load on the wear behaviour of polypropylene/carbonized bone ash particulate composite. Egyptian Journal of Basic and Applied Sciences, 1(1), 67–70.
Baruwa, A. D., Oladijo, O. P., Maledi, N., & Akinlabi, E. T. (2018). Influence of surface treatment on dry sliding wear behavior of hydrophobic silane coating on AISI 304. IOP Conference Series: Materials Science and Engineering, 423, 012158.
Behnagh, R. A., Besharati Givi, M. K., & Akbari, M. (2012). Mechanical properties, corrosion resistance, and microstructural changes during friction stir processing of 5083 aluminum rolled plates. Materials and manufacturing processes, 27(6), 636-640.
Bhaskar, K. V., Sundarrajan, S., Rao, B. S., & Ravindra, K. (2018). Effect of reinforcement and wear parameters on dry sliding wear of Aluminum composites-A review. Materials Today: Proceedings, 5(2), 5891–5900.
Boromei, I., Ceschini, L., Morri, A., & Garagnani, G. L. (2006). Friction stir weldiong of Aluminium based composites reinforced with Al2O3 particles: Effects on microstructure. Metallurgical Science and Technology, 24(1), 12–21.
Das, H., Mondal, M., Hong, S.-T., Chun, D.-M., & Han, H. N. (2018). Joining and fabrication of metal matrix composites by friction stir welding/processing. International Journal of Precision Engineering and Manufacturing-Green Technology, 5(1), 151–172.
Deuis, R. L., Subramanian, C., & Yellup, J. M. (1997). Sliding wear of aluminum composites-A review. Composites Science and Technology, 3538(96), 415–435.
Dinaharan, I, Kalaiselvan, K., Akinlabi, E. T., & Davim, J. P. (2017a). Microstructure and wear characterization of rice husk ash reinforced copper matrix composites prepared using friction stir processing. Journal of Alloys and Compounds, 718, 150–160.
Dinaharan, I., Kalaiselvan, K., & Murugan, N. (2017b). Influence of rice husk ash particles on microstructure and tensile behavior of AA6061 aluminum matrix composites produced using friction stir processing. Composites Communications, 3, 42-46.
Erinosho, M. F., Akinlabi, E. T., Pityana, S., Owolabi, G., Park, A., Campus, K., … Africa, S. (2017). Laser surface modification of Ti6Al4V-Cu for improved microhardness and wear resistance properties. Materials Research., 20(4), 1143–1152.
Fatchurrohman, N., Farhana, N., & Marini, C. D. (2018). Investigation on the effect of Friction Stir Processing Parameters on Micro-structure and Micro-hardness of Rice Husk Ash reinforced Al6061 Metal Matrix Composites. IOP Conference Series: Materials Science and Engineering, 319(1), 0–6.
Feng, A. H., Chen, D. L., & Ma, Z. Y. (2010). Microstructure and cyclic deformation behavior of a friction-stir-welded 7075 al alloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41(4), 957–971.
Garcia, C., Azpilgain, Z., Aginagalde, A., Esnaola, J. A., Galdos, L., & Torca, I. (2009). Tensile behaviour of 6082 Aluminium alloy sheet under different conditions of heat treatment, temperature and strain rate. Key Engineering Materials, 423(February), 105–112.
Gerlich, A. P. (2017). Critical Assessment 25 : Friction stir processing , potential and problems Critical Assessment. Materials Science and Technology, 33(10), 1139–1144.
Hao, Z., Fu, X., Men, X., & Zhou, B. (2019). Study on tensile and fracture properties of 7050-T7451 aluminum alloy based on material forming texture characteristics. Materials Research Express, 6(3).
Huang, G., Hou, W., & Shen, Y. (2018). Evaluation of the microstructure and mechanical properties of WC particle reinforced aluminum matrix composites fabricated by friction stir processing. Materials Characterization, 138(November 2017), 26–37.
Ikumapayi, O M, Ojolo, S. J., & Afolalu, S. A. (2015). Experimental and theoretical investigation of tensile stress distribution during Aluminium wire drawing. European Scientific Journal, 11(18), 1857–7881. h
Ikumapayi, O. M., Okokpujie, I. P., Afolalu, S. A., Ajayi, O. O., Akilabi, E. T., & Bodunde, O. P. (2018). Effects of quenchants on impact strength of single-vee butt welded joint of mild steel. IOP Conference Series: Materials Science and Engineering, 391, 1–10.
Ikumapayi, OM, Akinlabi, Esther T and Majumdar, J. D. (2019a). Influence of carbonaceous agrowastes nanoparticles on physical and mechanical properties of friction stir processed AA7075-T651 metal matrix composites. Surface Topography: Metrology and Properties, 7(3), 1–17.
Ikumapayi, OM; Akinlabi, ET; Majumdar, JD; Akinlabi, S. (2019b). Characterization of high strength Aluminium – based surface matrix composite reinforced with low-cost PKSA fabricated by friction stir processing. Materials Research Express, 6, 1–27.
Ikumapayi, Omolayo M, & Akinlabi, E. T. (2019). Experimental Data on Surface Roughness and Force Feedback Analysis in Friction Stir Processed AA7075 – T651 Aluminium Metal Composites. Data in Brief, https://doi.org/10.1016/j.dib.2019.103710.
Ikumapayi, Omolayo M, Akinlabi, E. T., & Majumdar, J. D. (2018a). Review on thermal, thermo- mechanical and thermal stress distribution during friction stir welding. International Journal of Mechanical Engineering and Technology, 9(8), 534–548.
Ikumapayi, Omolayo M, Akinlabi, E. T., Pal, S. K., & Majumdar, J. D. (2019c). A survey on reinforcements used during friction stir processing of Aluminium metal matrix hybrid composites. Procedia Manufacturing, 35, 935–940.
Ikumapayi, Omolayo M., & Akinlabi, E. T. (2019). Efficacy of α-β Grade titanium alloy powder (Ti-6Al-2Sn-2Zr-2Mo-2Cr-0.25Si) in surface modification and corrosion mitigation in 3.5% NaCl on friction stir processed armour grade 7075-T651 aluminum alloys - Insight in defence applications. Materials Research Express, 6(7), 3–8.
Ikumapayi, Omolayo M., Oyinbo, S. T., Bodunde, O. P., Afolalu, S. A., Okokpujie, I. P., & Akinlabi, E. T. (2018b). The effects of lubricants on temperaturedistribution of 6063 aluminium alloy duringbackward cup extrusion process. Journal of Materials Research and Technology, 8(1), 1175–1187.
Jain, S., Sharma, N., & Gupta, R. (2018). Dissimilar alloys (AA6082/AA5083) joining by FSW and parametric optimization using Taguchi, grey relational and weight method. Engineering Solid Mechanics, 6(1), 51-66.
Jain, V. K. S., Muhammed, P. M., Muthukumaran, S., & Babu, S. P. K. (2018). Microstructure, mechanical and sliding wear behavior of AA5083–B4C/SiC/TiC surface composites fabricated using friction stir processing. Transactions of the Indian Institute of Metals, 71(6), 1519–1529.
Jeyaprakash, N., Yang, C., Duraiselvam, M., & Prabu, G. (2019). Microstructure and tribological evolution during laser alloying WC-12 % Co and Cr 3 C 2 − 25 % NiCr powders on nodular iron surface. Results in Physics, 12(December 2018), 1610–1620.
Johannes, L. B., & Mishra, R. S. (2007). Multiple passes of friction stir processing for the creation of superplastic 7075 aluminum. Materials Science and Engineering A, 464(1–2), 255–260.
Kishan, V., Devaraju, A., & Prasanna Lakshmi, K. (2018). Tribological properties of nano TiB2particle reinforced 6061-T6 Aluminum alloy surface composites via friction stir processing. Materials Today: Proceedings, 5(1), 1615–1619.
Koli, D. K., Agnihotri, G., & Purohit, R. (2014). A Review on Properties, Behaviour and Processing Methods for Al- Nano Al2O3 Composites. Procedia Materials Science, 6(Icmpc), 567–589.
Kubit, A., Kluz, R., Trzepieciński, T., Wydrzyński, D., & Bochnowski, W. (2018). Analysis of the mechanical properties and of micrographs of refill friction stir spot welded 7075-T6 aluminium sheets. Archives of Civil and Mechanical Engineering, 18(1), 235–244.
Kumar, K., Gulati, P., Gupta, A., & Shukla, D. K. (2017). A review of friction stir processing of aluminium alloys using different types of reinforcements. Int. J. Mech. Eng. Technol, 8(7), 1638-1651.
Kumar, P., & Wani, M. F. (2017). Friction and wear behaviour of hypereutectic Al-Si alloy / steel tribopair under dry and lubricated conditions, 15(June), 21–49.
Kundu, J., & Singh, H. (2017). Friction stir welding process: An investigation of microstructure and mechanical properties of Al Alloy AlMg4. 5Mn joint. Engineering Solid Mechanics, 5(2), 145-154.
Kurgan, N. (2014). Investigation of the effect of diffusion bonding parameters on microstructure and mechanical properties of 7075 aluminium alloy. The International Journal of Advanced Manufacturing Technology, 71(9–12), 2115–2124.
Mishra, R. S., & Ma, Z. Y. (2005). Friction stir welding and processing. Materials Science and Engineering R: Reports, 50(1–2), 1–78.
Mishra, Rajiv Sharan, De, P. S., & Kumar, N. (2014). Friction Stir Welding and Processing. https://doi.org/10.1007/978-3-319-07043-8
Mistry, J. M., & Gohil, P. P. (2017). An overview of diversified reinforcement on aluminum metal matrix composites: Tribological aspects. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 231(3), 399–421.
Narasimharaju, S., & Sankunny, S. (2019). Microstructure and fracture behavior of friction stir lap welding of dissimilar AA 6060-T5/Pure copper. Engineering Solid Mechanics, 7(3), 217-228.
Navaneethakrishnan, T., & Ganesh, P. (2015). Effect of welding parameters on friction stir welded dissimilar aluminum alloys 7075 and 6082 with various tool pin profiles. Journal of Chemical and Pharmaceutical Sciences, 2015-April(9), 463–468.
Offor, P. O., Okorie, B. A., Ezema, F. I., Aigbodion, V. S., & Daniel-mkpume, C. C. (2015). Synthesis and characterization of nanocrystalline zinc sulphide thin fi lms by chemical spray pyrolysis. Journal of Alloys and Compounds, 650, 381–385.
Padhy, G. K., Wu, C. S., & Gao, S. (2017). Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review. Journal of Materials Science and Technology, 34, 1–38.
Pandey, V., Singh, J. K., Chattopadhyay, K., Srinivas, N. C. S., & Singh, V. (2017). Influence of ultrasonic shot peening on corrosion behavior of 7075 aluminum alloy. Journal of Alloys and Compounds, 723, 826–840.
Patel, V. V., Badheka, V., & Kumar, A. (2017). Effect of polygonal pin profiles on friction stir processed superplasticity of AA7075 alloy. Journal of Materials Processing Technology, 240, 68–76.
Rambabu, P., Prasad, N. E., & Kutumbarao, V. V. (2017). Aerospace materials and material technologies. https://doi.org/10.1007/978-981-10-2143-5
Rana, H. G., Badheka, V. J., & Kumar, A. (2016). Fabrication of Al7075 / B4C Surface Composite by Novel Friction Stir Processing (FSP) and Investigation on Wear Properties. Procedia Technology, 23, 519–528.
Sanusi, K. O., & Akinlabi, E. T. (2017). Friction-stir processing of a composite aluminium alloy (AA 1050) reinforced with titanium carbide powder. Materiali in Tehnologije, 51(3), 427–435.
Selvakumar, S., Dinaharan, I., Palanivel, R., & Babu, B. G. (2017). Development of stainless steel particulate reinforced AA6082 aluminum matrix composites with enhanced ductility using friction stir processing. Materials Science and Engineering A, 685(January), 317–326.
Sert, A., & Celik, O. N. (2014). Wear behavior of SiC-reinforced surface composite Al7075-T651 aluminum alloy produced using friction stir processing. Indian Journal of Engineering & Materials Sciences, 21(February), 35–43.
Shahraki, S., Khorasani, S., Behnagh, R. A., Fotouhi, Y., & Bisadi, H. (2013). Producing of AA5083/ZrO 2 nanocomposite by friction stir processing (FSP). Metallurgical and Materials Transactions B, 44(6), 1546-1553.
Sharma, A., Sharma, V. M., Sahoo, B., Joseph, J., & Paul, J. (2018). Study of nano-mechanical, electrochemical and raman spectroscopic behavior of Al6061-SiC-Graphite hybrid surface composite fabricated through friction stir processing. Journal of Composites Science, 2(32), 1–17.
Sharma, V., Prakash, U., & Kumar, B. V. M. (2015). Surface composites by friction stir processing: A review. Journal of Materials Processing Technology, 224, 117–134.
Shojaeefard, M. H., Akbari, M., Asadi, P., & Khalkhali, A. (2017). The effect of reinforcement type on the microstructure, mechanical properties, and wear resistance of A356 matrix composites produced by FSP. The International Journal of Advanced Manufacturing Technology, 91(1-4), 1391-1407.
Sudhakar, D., Jeyasimman, D., & Duraiselvam, M. (2015). Dry sliding wear behavior of Cr 3 C 2 -NiCr coating on austenitic stainless steel. International Journal Of Core Engineering & Management, 1(12), 215–225.
Sudhakar, I., Madhu, V., Madhusudhan Reddy, G., & Srinivasa Rao, K. (2015). Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing. Defence Technology, 11(1), 10–17.
Sudhakar, I., Madhusudhan Reddy, G., & Srinivasa Rao, K. (2016). Ballistic behavior of boron carbide reinforced AA7075 aluminium alloy using friction stir processing – An experimental study and analytical approach. Defence Technology, 12(1), 25–31.
Taheri-Behrooz, F., Aliha, M. R., Maroofi, M., & Hadizadeh, V. (2018). Residual stresses measurement in the butt joint welded metals using FSW and TIG methods. Steel and Composite Structures, 28(6), 759-766.
Torabi, A. R., Kalantari, M. H., & Aliha, M. R. M. (2018). Fracture analysis of dissimilar Al‐Al friction stir welded joints under tensile/shear loading. Fatigue & Fracture of Engineering Materials & Structures, 41(9), 2040-2053.
Torabi, A. R., Kalantari, M. H., Aliha, M. R. M., & Ghoreishi, S. M. N. (2019). Pure mode II fracture analysis of dissimilar Al-Al and Al-Cu friction stir welded joints using the generalized MTS criterion. Theoretical and Applied Fracture Mechanics, 104, 102369.
Vasco, M., Tserpes, K., & Pantelakis, S. (2018). Numerical simulation of tensile behavior of corroded Aluminum alloy 2024 T3 considering the hydrogen embrittlement. Metals, 8(1), 56.
Vijaya Kumar, P., Madhusudhan Reddy, G., & Srinivasa Rao, K. (2015). Microstructure and pitting corrosion of armor grade AA7075 aluminum alloy friction stir weld nugget zone – Effect of post weld heat treatment and addition of boron carbide. Defence Technology, 11(2), 166–173.