In this paper, a deterministic inventory model with depletion rate dependent holding cost is developed. The demand rate is a power function of the on-hand inventory behind to a certain stock level, at which the demand rate becomes a constant. Shortages are allowed and partially backlogged with the function of waiting time of next replenishment. It is also proved in this model that the optimal replenishment policy not only exists but also is unique. Furthermore, it is provided a simple solution procedure for finding the maximum total profit per unit time. Numerical examples have also been given to illustrate the model and real managerial fact in inventory holding for stock dependent demand.

This paper presents an empirical investigation to study the effects of retail brand on organizational competitiveness. The study has accomplished among 247 randomly selected retail stores located in city of Tehran, Iran. We have designed a questionnaire in Likert scale and distributed the questionnaires among some managers of retail stores. Bartlett KMO and Cronbach alpha have been calculated as 0.7 and 0.863, respectively, which are within the desirable levels. Using principal component analysis, the study has detected five factors influencing on organizational competitiveness including effective brand, distribution management, customer strategy, retail location and competitive tools. The highest value belongs to retail location (B = 1.196) followed by distribution management (B = 0.825), effective brand (B = 0.47) and competitive tools (B = 0.470).

In advanced modern turbines, the temperature of the turbine & apos; s first blade row which is called the turbine & apos; s hot part, increases almost as 1000?. These blades must operate for long periods of time. Since, the main failure reason of the parts operating under high temperature and cyclic loading conditions is fatigue as well as creeping phenomena, acquiring an accurate estimate of these blades & apos; lifetime under creeping and fatigue interactions is very necessary for theoretical and practical requirements. The fatigue of the first blade row of the micro turbine TRI60 is analyzed in this study. For the purpose of estimating the fatigue lifetime of turbine and motor, heat transfer of blades as well as thermal stress is analyzed at first via ABAQUS software. Consequently, a fatigue analysis under full cycle and within the interval of 2/3 v_max to v_max is performed using Smith-Watson-Taper algorithm and transient modal analysis via Fe-safe software.

There are literally several studies accomplished to predict the fatigue life of leaf springs but estimation of fatigue life of a parabolic leaf spring by using CAE tools has not yet been executed in the past. Parabolic spring is an important component in a vehicle suspension system. It needs to have excellent fatigue life and in today’s scenario manufacturers rely on constant loading fatigue analysis. The objective of this work is to perform the fatigue analysis of parabolic leaf spring by three different methods where CAE analysis is performed to observe the distribution of stress fatigue life and damage using Goodman approach. In this work, fatigue life of the parabolic leaf spring is determined as per SAE spring design manual and experimentally by testing on full scale fatigue testing machine. ANSYS is used for CAE solution for the prediction of leaf springs fatigue life considering stress theory. The fatigue life estimated by all three modes is then compared for the purpose of validation. The methodology used in this paper brings a practical approach to the professionals in the industries who are engaged for design of mechanical components.

This paper presents the free vibration analysis of stiffened isotropic plate by means of finite element method. Stiffeners are used in plates to increase the strength and stiffness. The effect of position of stiffeners on isotropic plate has been studied which involve the possible combination of clamped and free edge condition. The model has been discretized using a 20-node solid element (SOLID186) from the ANSYS element library. The natural frequencies are calculated using Block-Lanczos algorithm. The comparisons of stiffened plate with the available results are found to be in good uniformity. The effect of different boundary conditions, stiffeners location, thickness ratio, stiffener thickness to plate thickness and aspect ratio on the vibration analysis of stiffened plates has been studied.

Head injuries are among the dangerous injuries which are common in all sport types. In the present study, the dynamic response of a punch to the head of a Wushu fighter was simulated by modeling the human head in ABAQUS software. Moreover, the maximum displacement and the stress distribution in the helmet and head parts were analyzed by finite elements method. The obtained results showed a significant interval in the response of different tissues to the delivered blow. The maximum shear stress, normal stress and displacement in the helmet were 5.616 MPa, 5.755 MPa and 1.236 mm, respectively, while these magnitudes were respectively 3.199 MPa, 6.268 MPa and 0.0001867 mm in skull, 4.596 MPa, 3.691 MPa and 0.1180 mm in the head skin and 0.01098 MPa, 0.8779 MPa and 0.04993 mm in brain. The present model with its unique features can be a valuable and powerful instrument to gain a better insight into the injury mechanism for better diagnosing of injuries and to design protective helmets with higher efficiency and safety for various sport forms as well.

An analytical and numerical solution is developed for a transient heat conduction equation in which a plane slab is heated by a bimodal distribution beam over the upper surface. In laser heat treatment of steel few methods are used to produce a wider and nearly uniform average irradiance profile. This may be achieved by a bimodal (TEM11) shaped laser beam. In this paper, Green function method is employed to derive an analytical solution for thermal field distribution induced by laser forming process. Then 3-D finite element modeling of a slab in the ANSYS code is used to model the thermal field of laser forming with bimodal beam distribution. The results show that bimodal beam is useful for obtaining a uniform heat intensity distribution.

In this paper a molecular dynamics simulation of nano-metric cutting of copper with a diamond tool is presented. MD simulations require the determination of the interaction of the involved atoms through a function of potential for the materials involved in the analysis and the accurate topography of the studied area, leading to high demand of computational time. The models presented are taking into account the cubic lattice of copper, test two different potential functions and at the same time control the computational cost by introducing small models at realistic cutting conditions. This is realized by a novel code developed and allows focusing on the influence of several processes and modeling parameters on the outcome of the simulations. Models with and without thermostat atoms are investigated and the influence of cutting conditions and cutting tool geometry on chip morphology, cutting forces and cutting temperatures are studied.

Organized retailing (OZR) is one of the most promising industries in India. The OZR sector of India is now among the top five fastest growing markets of the world. High population, globalization, and the increasing income of middle class etc. are a number of factors that make Indian market more challenging and competitive. In today’s globalized world, effective supply chain performance (SCP) is highly important to ensure the productivity in the whole supply chain (SC). In this paper, we investigated the factors that affect cold supply chain performance (CSCP) of organized farm products retailing (OFPR), developed and validated a model. This research will be helpful to formulate better strategies for this sector to a greater extent; this model will also be useful and applicable for other developing Asian countries because of enormous similarities in their market tendencies.

In this paper, an integrated production-inventory model with multi-item is developed from the perspectives of single producer, multiple suppliers and retailers. In this three-layer supply chain, the retailers are non-competing. Every supplier delivers only single type of raw material to the producer. The producer manufactures finished goods from the combination of fixed percentage of different types of raw materials. The producer manufactures various types of objects and supplies them to retailers according to the demand of multiple retailers. This paper studies the impact of different types of business policies such as exponential demand rate, demand dependent production rate, optimum order size of raw materials, and unit production cost at each stage of integrated marketing system. Mathematica is used to develop the model and to optimize the integrated profit function. A numerical example and sensitivity analysis is illustrated to justify the feasibility of the proposed model.