Systematic design of an atmospheric data acquisition flying vehicle telemetry system

Bohlouri, V.; Kosari, A.; Aliha, M.

Abstract: In this paper, we have provided hands-on experience in systematic design, implementation and flight test of an atmospheric data acquisition flying vehicle as a standard CanSat telemetry mission. This system is designed for launching from a rocket at a separation altitude about 1000-meter. During its flight, the reusable flying vehicle collects environmental data and transmits it directly to the ground station. The ground station, which is implemented at a pre-defined radio frequency band receives data and plots the respective graphs. The design performs based on a systematic approach, in which the first step is set aside to mission and objectives definition. In the next step, the system requirements are identified and the required main subsystems and elements with their technical requirements will be extracted. The structure analyses were also performed by ABAQUS software to obtain the natural frequency and the mode shape. The wireless communications, onboard microcontroller programming, sensor interfacing and analog to digital conversion describe the basic technologies employed in the system implementation. This flying vehicle in comparison with the other similar ones is more lightweight, has few interface circuits and high precision sensors. According to the flight test outputs, low power consumption, high transmit line up to 2Km despite of limitation in TX power and up to 10g normal acceleration withstanding are important specific characteristics of the implemented flying system.

How to cite this paper

        APA: Bohlouri, V., Kosari, A & Aliha, M. (2014). Systematic design of an atmospheric data acquisition flying vehicle telemetry system. Engineering Solid Mechanics, 2(4), 265-276.
    

        Chicago/Turabian: Bohlouri, V., Kosari, A & Aliha, M. 2014. "Systematic design of an atmospheric data acquisition flying vehicle telemetry system." Engineering Solid Mechanics 2, no. 4 (2014): 265-276.
    

        AMA: Bohlouri, V., Kosari, A & Aliha, M. Systematic design of an atmospheric data acquisition flying vehicle telemetry system. Engineering Solid Mechanics. 2014;2(4):265-276.
    

References

Eerkens, M. R., Van Breukelen, E., Verhoeven, C., Vollebregt, M. S., & Fitié, A. (2008, September). The Dutch CanSat competition: How 350 secondary school pupils compete to build the most innovative satellite in a soda can. International Astronautical Congress.

Ghorbanpanah, H., Moghaddam, M. H., Saeedi, A., & Alishahi, S. (2013, January). Design and implementation of building energy monitoring system using wireless sensor networks. In Electricity Distribution (CIRED 2013), 22nd International Conference and Exhibition on (pp. 1-4). IET.

Knacke, T. W. (1991). Parachute recovery systems design manual (No. NWC-TP-6575). Naval Weapons Center China Lake, CA.

LaCombe, J. C., Wang, E. L., Nicolescu, M., Rivera, P., & Poe, B. (2007, April). Design experiences with a student satellite program. In Proceedings of the 2007 American Society for Engineering Education Pacific Southwest Annual Conference.

Ley, W., Wittmann, K., & Hallmann, W. (Eds.). (2009). Handbook of space technology (Vol. 22). John Wiley & Sons.

Nylund, A., & Antonsen, J. (2007). CANSAT-GENERAL INTRODUCTION AND EDUCATIONAL ADVANTAGES. In Proceedings of the 18th ESA Symposium on European Rocket and Balloon Programmes and Related Research, Visby.

PIC18FXX2 Data Sheet, H. P. (2006). Enhanced Flash Microcontrollers with 10-Bit A/D. Microchip Technology Inc.

Wasson, C. S. (2006). System analysis, design, and development: Concepts, principles, and practices (Vol. 22). John Wiley & Sons.

Watanabe, M., & Ochi, Y. (2007, September). Modeling and motion analysis for a powered paraglider (PPG). In SICE, 2007 Annual Conference (pp. 3007-3012). IEEE.

Wertz, J. R., & Larson, W. J. (1999). Space mission analysis and design, third Edition.

Zhao, L., & Jianyi, K. (2009, June). Path Planning of Parafoil System Based on Particle Swarm Optimization. In Computational Intelligence and Natural Computing, 2009. CINC & apos; 09. International Conference on (Vol. 1, pp. 450-453). IEEE.