Abstract: In the present work, synthesis of phthalimide and naphthalimide derived Biginelli compounds was performed. Allylation of phthalic & naphthalic anhydride, followed by ozonolysis resulted in the formation of N-phathalimido/naphpthalimido acetaldehyde (2 and 7). These aldehydes were subjected to Biginelli reaction using urea/thiourea and divergent β-keto esters in the presence of sulfated tin oxide (5 mol%) as catalyst in ethanol reflux to produce the corresponding dihydropyrimidinone compounds (5a-j and 8a-h). Additionally, both their antioxidant and anti-inflammatory functions were carried out. Compounds 5e, 5f, 5i, and 5j have shown potent to moderate potent activity for both antioxidant and anti-inflamamtory activities when compared to standard. Compounds 8c and 8g have shown potent antioxidant and anti-inflamamtory activities when compared to other compounds.

Abstract: Plant growth regulators (PGR), also known as plant hormones, are a variety of chemical compounds that have a significant impact on the development and differentiation of plant cells. This work aimed to study the effect of various combinations of Plant Growth Regulators (PGRs) for example [6-Benzyladenine (BA), 2,4-dichlorophenoxyaceticg acid (2,4-D), Naphthalene acetic acid (NAA) and indol-3-ylbutyric acid (IBA)] on callus induction and shoot regeneration from anther culture of S1 progenies resulted from Manfalouty cultivar open pollinated. The results showed that highest value of percentage of callus induction was 10.6% on MS medium supplemented with 1 mg / l of NAA and 2 mg / l of BA also highest value of percentage of shoot formation 60 % on MS medium supplemented with 3 mg/ l of NAA and 2 mg /l of BA.

Abstract: The current technique was developed to estimate the amount of alectinib present in spiked rabbit plasma using liquid chromatographic mass spectrometry. The liquid-liquid extraction method was used, and chromatographic separation was carried out on a C18 (4.6mm id x 50mm) analytical column with a mobile phase consisting of acetonitrile and water with 0.1% formic acid at a volume ratio of 75:25. Alectinib's product m/z +483.2 (parent) 396.1 (product) and the internal standard m/z +447.5 (parent) 380.3 (product) were both obtained using positive ion mode. The calibration curve was linear from 0.5 to 600 ng/ml. The percentage extraction recovery (98.15% → 98.86%), demonstrated excellent matrix and analyte selectivity (% interference = 0), and satisfactory stability study results in all types (% nominal 94.94% → 99.63%). The intra and interday accuracy with % nominal 97 → 98.8%, precision % CV ≤ 2% in all quality control levels. The rabbit model's pharmacokinetic parameters were examined, and alectinib's area under the curve (AUC 0—∞) was 4269 ± 8.13 hr.ng/ml. The half-life of elimination (t1/2) is 8.52 ± 6.66 hours. The currently established approach was used in rabbit blood samples for pharmacokinetic investigations of commercial formulations since it was thought to be a novel, verified bioanalytical method based on experimental results.

Abstract: The processes involved to extract chitosan biopolymers from natural resources often employ hazardous chemicals and long processing time. This work provides a sustainable direct extraction method of chitosan from snail shells. Previous attempts using acetogenin in graviola extracts succeeded in the extraction of chitosan from marine shells. However, the slow reaction has prompted the addition of hydrogen bond acceptor solution into the graviola extract. Choline chloride is an excellent hydrogen bond acceptor mixed with acetogenin as hydrogen bond donor to form natural deep eutectic solvent (NADES) for the direct extraction of chitosan. Chitosan obtained from this method has a degree of deacetylation of 91% and a molecular weight of 481 kDa with fiber-like morphology. The direct extraction of chitosan from NADES consisting of choline chloride and acetogenin has proven to extract chitosan with comparable properties to commercial chitosan.

Abstract: This study used 30 cm long packed by 3 kg soil columns to explore the effects of peat, compost, and charcoal at 5% on the movement of fipronil (99.9 % purity) in clay loam soil and sandy clay loam soil. The soil columns were preconditioned with calcium chloride solution (0.01 M) before applying the pesticide and potassium iodide. Potassium iodide solution (0.2 M) was added at a rate of 10 mL as a water tracer and a quantity of fipronil solution (10 µg g^-1soil) was applied on the soil surface of each column. Next, fipronil was leached from the soil columns with a calcium chloride solution (0.1 M) and the leachates were collected and analyzed. The results show that water tracer I^- leached fast in soil columns. The breakthrough curve of fipronil appeared from leachates of soil columns after iodide for a while, indicating that fipronil is a moderate or lower mobile compound depending on type of soil and type of soil amendments. In general, adding soil amendments (peat, compost, and charcoal) to clay loam soil and sandy clay loam soil resulted in improved fipronil adsorption and decreased the amount of fipronil that leached into groundwater. This study is very useful for preserving groundwater from pollution, especially in the Middle East due to the lack of water sources.

Abstract: In the present work, we synthesized new thiosemicarbazone based Schiff base ligands and their Mn(II), Ni(II), Cu(II) and Zn(II) complexes. The synthesized compounds were characterized and their antimicrobial activities were studied. Elemental analysis, IR, ¹H-NMR and mass spectrometry were done to fully characterize all the compounds. The ligands and their complexes were screened for in-vitro biological study against Gram positive (Bacillus subtilis) and Gram negative (E. coli, Klebsiella pneumonia, Pseudomonas aeruginosa) bacteria for the Zone of Inhibition method. The thiosemicarbazone based complexes showed better activity than the ligands.

Abstract: A potentiometric titration study has been undertaken to determine the cationic surfactant influence on mixed ligand complexes in ternary systems consisting of cobalt (II), nickel (II), copper (II), and zinc (II) with aspartic and citric acids at various concentrations (0.0–2.5% w/v) of the CTAB (Cetyltrimethyl ammonium bromide)-surfactant solution while maintaining an ionic strength of 0.16 mol L^-1 (NaCl) at 30 °C. Titrations were performed in the presence of different ratios (M:L:X = 1:2:2, 1:4:2, and 1:2:4) of metal (M) and aspartic acid (L) to citric acid (X) using sodium hydroxide. Model systems were developed based on statistical parameters and residual analysis. For Co(II), Ni(II), Cu(II), and Zn(II), the species detected were MLXH₂, MLX₂H₅, and MLX₃. The electrostatic relationship of the ligands' side chains, charge neutralization, chelate effect, stacking interactions, and hydrogen bonding are used to explain the trend in the variation of logarithm of stability constants (log β) values with changing dielectric constant and mole fraction of the surfactant. The variation in species distribution as a function of pH and surfactant composition is also presented and discussed, as are plausible equilibria for the formation of the species and structures of the ternary complexes are also presented and discussed.

Abstract: The purpose of this article is to investigate the effect of various process parameters such as compaction pressure, sintering temperature, and time on the physio-mechanical properties of a powder metallurgy-fabricated composite made of pure aluminium/alumina. Temperatures (580°C, 600°C, and 630°C), periods (1.5, 2, and 2.5 hr), compacting loads (30KN-65KN), and alumina percentages (2, 4, 6, and 8weight percent) are all considered. X-ray diffraction (XRD) and X-ray fluorescence spectroscopy (XRF) studies are carried out to determine the phases present and their proportions. Crystallite size study is performed using XRD data, and the Al+4 weight % alumina composite has the smallest size of any composite tested. For optimization, sintering density, porosity, and microhardness are calculated. Scanning electron microscopy (SEM) is used to analyse the different microstructures. At 600°C, 2 hr of operating time, and 4weight% alumina additions, the highest sintering density and microhardness are found.

Abstract: The interaction of nicotinic acid and thiourea with the chloride salts of Ca(II), Mg(II), Co(II), Ni(II), Cu(II), and Fe(III) ions led to the synthesis of a unique series of metal chelates. All formed metal complexes were clarified using a variety of analytical and spectral techniques, besides magnetic moment and thermal tests. The electronic and magnetic measurements indicated that the paramagnetic chelates (3) and (4), as well as the diamagnetic complexes (1) and (2), were responsible for the tetrahedral geometrical structure. The outcomes also led to the production of square-planar, and high-spin octahedral structures for chelates (5) and (6). Thermodynamic studies using activation energy values revealed that complex (1) is more thermally stable than complex (2) and complex (3) is more stable than complex (4). Fe(III) complex exhibits higher antibacterial and antifungal activities than other metal complexes. Chelate (6) exhibits the highest rate of germination in wheat.

Supplementary Information

Abstract: Here derivatives of imidazo[2,1-b][1,3]thiazines are attractive objects for organic and medicinal chemists. In the present work chemoselective conditions for oxidation of the sulfur atom in the 6-(2-pyridinyloxy)substituted (benzo)imidazo[2,1-b][1,3]thiazines to the corresponding sulfoxides were proposed and their synthesis was performed. Synthesized sulfoxides exist in the diastereomeric mixture and individual diastereomers 2a-e and 3a-e were obtained using a chromatographic technique. The structure of compounds 2a-e and 3a-e were characterized using ¹H, ¹³C NMR, LC-MS spectra, and X-ray analysis for derivative 2b. The anti-inflammatory activity screening in vivo was performed using the carrageenan model of inflammatory paw edema in white rats for all the diastereomeric mixtures and individual diastereomers. Diastereomer 2c possessed an anti-inflammatory effect with an inflammation inhibition index of 46.1% which was equal to the activity of the reference drug diclofenac sodium.

Abstract: In this work, the multifunctional potential of four 3-acetylcoumarin derivatives was studied. The derivatives were significantly active against bacteria Staphylococcus aureus, Pseudomonas aeoginosa and fungal strain Candida albicans. The results of antioxidant activity assays were promising when compared to ascorbic acid. The in vitro anticancer activity was carried out using MTT assay on human cancer cell line COLO-205 and 3ACDT showed commendable antiproliferative activity along with appreciable tumor selectivity with distinct selectivity index. Moreover, ADMET properties of the compounds were determined using the pKCSM and SwissADME online tools and all compounds were found with good pharmacokinetic profile. Hence, from the obtained results from all the 3-acetylcoumarin derivatives, 3ACDT exhibited good therapeutical potential and can be optimized for lead development.

Abstract: The 1,3,4-Oxadiazole is an aromatic heterocyclic moiety recognized in drug research for its low lipophilicity. The multiple functionalities, heterocyclic azinane, sulfonamide, 1,3,4-oxadiazole and acetamide, are combined collectively to enhance the bioactivity potential of synthesized molecules. All the compounds were acquired by following microwave assisted and conventional techniques in a comparative way. The synthesized derivatives were screened for their antibacterial and enzyme inhibition potential. Furthermore, BSA binding analysis was executed to infer about the interaction with serum albumin. The spectral data of IR, EI-MS, ¹H-NMR and ¹³C-NMR were used to elucidate the final structures of compounds. The synthesized compounds had a modest antibacterial potential. Compound 8f bearing 2-methyl-4,5-dinitrophenyl group was the most active one against all the bacterial strains taken into account and α-glucosidase enzyme. Compound 8d bearing 4-nitrophenyl group was the best acetyl cholinesterase inhibitor and 8i bearing phenylethyl group was the best urease inhibitor.

Abstract: Condensation product of o-aminophenol and pyrrole-2-carboxylaldehyde behaves as a fluorescent sensor for Fe³⁺ and Sn²⁺ ions in aqueous medium over the other metal ions like Na⁺, K⁺, Mg²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Mn²⁺ and Cr³⁺. In aqueous solution, Fe³⁺ and Sn²⁺ ions coordinate to the receptor through a NON binding site which induces a strong fluorescence enhancement. Receptor can be applied as fluorescence enhanced probes for transition metal ions due to the inhibition of photo induced electron transfer (PET) mechanism.

Abstract: Many researchers are attracted to Chitosan based blends due to its properties and potential applications in various fields. The advanced development of Chitosan blends integrates the science and technology of blended materials. The present experimentation is reporting the preparation of Chitosan and Agar-Agar blends (CCA) by chemical mixing of these materials at different compositions. The thermal studies of the prepared blends were studied by differential scanning colorimeter (DSC) and thermogravimetric analysis (TGA) tools. Thermal studies reveal that the lowest degradation temperatures of blends might be attributed to the partial miscibility of CAA blends at particular composition and miscibility due to single glass transition temperature (T_g) between Chitosan and Agar-agar. Bonding nature of sample blends were carried out by Fourier transform infrared (FT-IR) instrumentation. This study reveals the interaction between Chitosan and Agar-agar is partial miscibility. Morphological study reveals that a few aggregated particles, which suggest the partial miscibility of CAA blends. Homogeneity of blend compositions and specific intermolecular interactions of hydrogen bonding type is also observed.

Abstract: The dissipation and side-effect of metribuzin (MBZ) were studied with various factors; two soil types (clay loam and sandy loam), soil amendment (wheat straw and without amendment), two temperature levels (25 and 50°C), sterilization (sterilized and unsterilized soil) and time of incubation (15 and 30 days) and designed by Windows version of MINITAB software package to reduce the time and the cost as well as increased the precision. Determination of MBZ by HPLC with recoveries ranged from 50.85 to 108.09%. The MBZ residues were detected in all samples up to 60 days of storage, respectively with decline in their concentrations with the time of incubation. The clay loam soil showed higher dissipation than the sandy loam soil. The different factors in the present study confirmed that the wheat straw amendment, non-sterilization and incubation at 50°C caused higher dissipation of MBZ than without wheat straw, sterilization and incubation at 25°C. The dissipation was described mathematically by a first order equation with t0.5 was ranged from 9.62 to 16.82 days in clay loam soil and from 10.01 to 16.04 days in sandy loam soil. The side-effect of MBZ was tested on soil dehydrogenase activity that can be considered as an indicator of the biological activity and microbial degradation. The result proved that the enzyme activity was significantly decreased in all treatments compared with the controls at 1 and 3 days of incubation then it was gradually increased at 7, 10, 15 and 30 days of incubation. Treatments of wheat straw, non-sterilized and incubated at 25°C or 50°C showed the lowest enzyme inhibition among all treatments.

Abstract: In the present work, we have discussed the synthesis of a series of 1-((2'-(2-(2-(substitutedphenyl))-2-oxoethyl)-2H-tetrazol-5-yl)-[1,1'-biphenyl]-4-yl)methyl)piperidine-4-carboxylic acid derivatives by the reaction of 1-((2'-(2H-tetrazol-5-yl)-[1,1'-biphenyl]-4-yl)methyl)piperidine-4-carboxylic acid with phenacyl bromides using potassium carbonate. The structures of synthesized derivatives have been characterized using different spectroscopic techniques like FT-IR, ¹H-NMR, ¹³C-NMR, and Mass. Synthesized compounds were screened for their antibacterial and anti-TB activities all the compounds have found better activity against selected pathogenic strains. In addition, in silco molecular docking studies were carried out on targeted enzymes DNA gyrase and 3-oxoacyl-ACP reductase with ADME-toxicology studies.

Abstract: A novel 1,3,4-thiadiazole containing 2-iminothiazolidine-4-ones 4a-b were synthesized through the reaction of 2-chloro-N-(5-ethyl/allylsulfanyl-[1,3,4]thiadiazol-2-yl)-acetamides 1a-b with ammonium thiocyanate in dry acetone. Condensation of 4a-b with various carbonyl compounds according to the standard Knoevenagel procedure yielded the corresponding 5-arylidene- (5a-d), 5-heterylidene- (6a-c), 5-isatinylidene- (7a-b) and 5-(3-phenyl-2-propene-1-ylidene)- (8a-b) derivatives. All the newly synthesized compounds were confirmed by their elemental analysis and spectral data. Synthesized compounds 4a, 5a, 5b, 6a, 6c and 7a were screened for their in vitro antitrypanosomal activity against T. brucei gambience (Feo strain). The 5-ylidene substituted compounds with S-allyl group in position 5 of thiadiazole cycle (5a, 5b, 6a and 7a) displayed good to excellent antitrypanosomal potency with a range IC50 = 7.3-12.8 µM.

Abstract: The regioselectivity of the [3+2] cycloaddition reactions between trans-β-nitrostyrene and C,N-diarylnitryle imine analogues as three atom components (TACs) has been studied with the use of Conceptual Density Functional Theory in the framework of Molecular Electron density Theory. Global and local reactivity indices were determined. Presented quantum-chemical computations showed that, for the reaction of nitroalkene with diphenylnitryle imine, the most favourable reaction path is determined by the nucleophilic attack of C3 carbon atom of TAC on an electrophilic C_α carbon atom of nitroalkene. Therefore, the creation of 1,3,4-triphenyl-5-nitro-Δ²-pyrazoline, according to channel B, is more probable. Similarly, to presented conclusion, for reactions of nitroalkene with nitryle imines containing ED group at para position of the phenyl ring also the most favourable reaction paths run through channel B leading to 1,3,4-triphenyl-5-nitro-Δ²-pyrazolines. In turn, reactions of nitroalkene with nitryle imines containing EW group at para position of the phenyl ring have the opposite preference and the most favourable reaction paths is channel A leading to 1,3,5-triphenyl-4-nitro-Δ²-pyrazolines.

Abstract: The food industry consumes large amounts of water although there is an increasing demand for water and a rapid decrease in the level of natural water resources. Wastewater resulting from food industries needs to be assessed for their compliance to standards. In this study, wastewater treatment steps from the food industry were investigated for accurate assessment of wastewater loading by analyzing parameters of the concentration of compounds present in the effluents. The results revealed that the parameters of treated wastewater were as follow, electrical conductivity 2931 μs/cm, total suspended solids 100 mg/L, biochemical oxygen demand 90 mg/L, chemical oxygen demand 250 mg/L, total phosphorus 7.9 mg/L, and total nitrogen 70 mg/L. This exerts a huge load on the biological treatment unit. Thus, this study offers an understanding and support in selecting appropriate treatment for industrial wastewater to obtain an effluent suitable in compliance with standards of the environmental quality.

Abstract: Pulvinaria tenuivalvata (Newstead) (Hemiptera: Coccidae) red soft scale insect is one of the most prevalent insect pests that attacks sugarcane plants. Insecticidal efficiency of six selected insecticides (Malatox, Sulfar, Admiral, Nomolt, Tafaban and Biover) was evaluated for their impact against nymphs and adult females of P. tenuivalvata on sugarcane leaves using leave dipping methods. This investigation was carried out for two successive seasons (July 2021-2022) at the laboratory of the Plant Protection Research Department at the El-Mattana Agricultural Research Station, Luxor Governorate, Egypt. Obtained results showed that the tested insecticides varied in efficacy on the different stages of pest (nymphs and adult females). Moreover, the nymphal stage of P.tenuivalvata was more susceptible to the tested pesticides compared to the adult stage. Admiral and nomolt were the most toxic against the nymphal and adult female stages of P. tenuivalvata on sugarcane leaves, sulfar, however, was the least successful in controlling this pest.

Abstract: The non-stoichiometric, calcium-deficient hydroxyapatite was prepared through a low-temperature from aqueous solutions method and characterized using Physico-chemical methods. The potential of this hydroxyapatite to adsorb and release insulin from aqueous solutions was evaluated under physiological conditions. The effect of contact time and initial concentration were studied in batch experiments. The adsorption rate reached up to 81±5% in the first half-hour of contact, while the release rate of insulin incubation was about 41 ± 5% after 1 hour. The pseudo-first-order, pseudo-second-order, Elovich equation, Weber and Morris intraparticle diffusion model and Bangham’s pore diffusion model were applied to study the kinetics of the adsorption process. The pseudo-second-order kinetic model provided the best correlation R²(0.998) of the used experimental data compared to the other models. The adsorption of insulin onto hydroxyapatite was correlated well R²(0.998) with the Langmuir model as compared to Freundlich, Temkin and Dubinin–Kaganer–Radushkevich (D-K-R) models, with a maximum adsorption capacity of 24.46 mg/g. The isotherms parameters values of ΔG⁰, b_t and E show that the adsorption process is favorable, spontaneous, exothermic, and controlled by physisorption. The point of zero charge (pHZPC) of hydroxyapatite and the isoelectric point (pI) of insulin indicate that the interaction of insulin molecules with prepared apatite can be well described as an ions exchange reaction.

Abstract: An experimental investigation was undertaken to study the Cobalt-based Stellite 6, powder deposited on SS 304 stainless steel substrate without any intermittent layer using an atmospheric plasma spray deposition process by varying the thickness of coating in the range of 74 µm, 128 µm, and 215 µm. The effect of coating thickness on metallurgical properties and corrosion resistance behavior was investigated. Optical microscopy, Scanning Electron Microscopy (SEM), and Energy Dispersive X-ray Spectroscopy (EDS) were employed to study the morphology of Stellite 6 coating. X-Ray Diffraction was used for structural analysis and to identify the phase formation. It was observed that the sample with 128 µm coating thickness provides the best result concerning microhardness and microstructure characteristics whereas the sample with 215 µm coating thickness provides the best corrosion resistance property. The reasons for the deviation were investigated and the factors responsible for the deviation were assigned in this investigation.