Abstract: Production plans based on Material Requirement Planning (MRP) frequently fall short in reflecting actual customer demand and coping with demand fluctuations, mainly due to the rising complexity of the production environment and the challenge of making precise predictions. At the same time, MRP is deficient in effective adjustment strategies and has inadequate operability in plan optimization. To address material management challenges in a volatile supply-demand environment, this paper creates a make-to-stock (MTS) material production planning model that is based on customer demand and the demand-driven production planning and control framework. The objective of the model is to optimize material planning output under resource constraints (capacity and storage space constraints) to meet the fluctuating demand of customers. To solve constrained optimization problems, the demand-driven material requirements planning (DDMRP) management concept is integrated with the grey wolf optimization (GWO) algorithm and proposed the DDMRP-GWO algorithm. The proposed DDMRP-GWO algorithm is used to optimize the inventory levels, shortage rates, and production line capacity utilization simultaneously. To validate the effectiveness of the proposed approach, two sets of customer demand data with different levels of volatility are used in experiments. The results demonstrate that the DDMRP-GWO algorithm can optimize the production capacity allocation of different types of parts under the resource constraints, enhance the material supply level, reduce the shortage rate, and maintain a stable production process.

Abstract: This paper explores the impact of retailers' corporate social responsibility (CSR) and manufacturers' overconfidence on manufacturers' carbon reduction in sustainable supply chains. We analyze the profits of manufacturers and retailers under different scenarios and explore the social welfare and environmental impacts under CSR. Our results suggest that retailers' CSR and manufacturers' overconfidence contribute positively to promoting carbon mitigation and reducing environmental impacts under certain conditions. However, with increasing CSR and manufacturer overconfidence levels, manufacturers are more likely to lead to worse environmental impacts and carbon emission reduction. In addition, we show that when the manufacturer's overconfidence level is high, manufacturers and retailers are more profitable and contribute to carbon emission reductions in the manufacturer without overconfidence (retailer without CSR) scenario. Moreover, we find that firms have the higher potential to capture optimal overall social welfare in the presence of retailers with CSR and manufacturer overconfidence.

Abstract: With the implementation of the Belt and Road Initiative, the inland ports planning is receiving more and more attention. In this work, we aim to determine the scale and function of different potential inland ports in a certain region while considering the cargo flow allocation schemes for the inland ports and seaports in cross-border trade. Unlike previous studies, we consider the dynamic interaction between local government and manufacturing enterprises in the inland port planning process. Based on this, we formulate a bilevel programming model for the considered inland port planning problem, where the upper-level focuses on the local government and the lower-level concentrates on the manufacturing enterprise. To solve the proposed model, we develop a hybrid heuristic algorithm by combining a genetic algorithm and an exact solution method. Furthermore, we conduct a case study of the inland ports planning for the Huaihai Economic Zone in China to verify the applicability of the proposed model and algorithm. The computational results demonstrate that the proposed optimization approach can effectively increase the cross-border transportation market share of inland ports within a limited investment amount and reduce the competition among these inland ports. Our case study also provides valuable management insights on inland port planning in terms of manufacturing enterprises weights, investment limit amount, scale effect, and cargo value weights.

Abstract: There have been many applications for machine learning algorithms in different fields. The importance of hyperparameters for machine learning algorithms is their control over the behaviors of training algorithms and their crucial impact on the performance of machine learning models. Tuning hyperparameters crucially affects the performance of machine learning algorithms, and future advances in this area mainly depend on well-tuned hyperparameters. Nevertheless, the high computational cost involved in evaluating the algorithms in large datasets or complicated models is a significant limitation that causes inefficiency of the tuning process. Besides, increased online applications of machine learning approaches have led to the requirement of producing good answers in less time. The present study first presents a novel classification of hyperparameter types based on their types to create high-quality solutions quickly. Then, based on this classification and using the hypergradient technique, some hyperparameters of deep learning algorithms are adjusted during the training process to decrease the search space and discover the optimal values of the hyperparameters. This method just needs only the parameters of the previous two steps and the gradient of the previous step. Finally, the proposed method is combined with other techniques in hyperparameter optimization, and the results are reviewed in two case studies. As confirmed by experimental results, the performance of the algorithms with the proposed method have been increased 36.62% and 23.16% (based on the best average accuracy) for Cifar10 and Cifar100 dataset respectively in early stages while the final produced answers with this method are equal to or better than the algorithms without it. Therefore, this method can be combined with hyperparameter optimization algorithms in order to improve their performance and make them more appropriate for online use by just using the parameters of the previous two steps and the gradient of the previous step.

Abstract: In this work, a probabilistic bid generation problem with the pricing of a bundle of lanes and carrier’s vehicle routing is considered as it is an importation in transportation service procurement. Depending on the network of the vehicle, there exist multiple lanes for traveling between two locations. To solve the bid generation problem efficiently, a two-phase method approach is presented. At the core of the procedure a feasible vehicle routing problem on a multidigraph is solved by an exhaustive search algorithm to enumerate all routes concerning routing constraints and treat each route as a decision variable in the set partitioning formulation. We examine our model both analytically and empirically using a simulation-based analysis.

Abstract: Companies are frequently confronted with the need to order different types of items from a single supplier or to manufacture the items in a production line. Indeed, coordinated ordering of multiple items may lead to important savings whenever a family of items can be ordered from a common supplier, produced in a common facility, or use a common mode of transportation. The Joint Replenishment Problem (JRP) tackles the coordinated replenishment of multiple items by minimizing the total cost, composed of ordering (or setup) costs and holding costs, while satisfying the demand. On the other hand, when items are subject to obsolescence, they may face an abrupt decline in demand as they are no longer needed. This decline can be caused by reasons such as rapid advancements in technology, going out of fashion, or ceasing to be economically viable. The present article develops an extension of the JRP where the items may suddenly become obsolete during an infinite planning horizon. The point at which an item becomes obsolete is uncertain. The lifetimes of the items are assumed to follow independent negative exponential distributions. A model is proposed by using the total expected discounted cost as the minimization criterion. The time value of money is considered through an appropriate discount rate. Extensive tests were performed to assess the impact of obsolescence rates and discount rates on the ordering policies. The progressive increase of the obsolescence rates determines smaller periods between successive replenishments, while the progressive increase of the discount rate determines smaller lot sizes.

Abstract: This paper considers an unrelated parallel machine scheduling problem with variable maintenance based on machine reliability to minimize the maximum completion time. To obtain the optimal solution of small-scale problems, we firstly establish a mixed integer programming model. To solve the medium and large-scale problems efficiently and effectively, we develop a hybrid discrete spider monkey optimization algorithm (HDSMO), which combines discrete spider monkey optimization (DSMO) with genetic algorithm (GA). A few additional features are embedded in the HDSMO: a three-phase constructive heuristic is proposed to generate better initial solution, and an individual updating method considering the inertia weight is used to balance the exploration and exploitation capabilities. Moreover, a problem-oriented neighborhood search method is designed to improve the search efficiency. Experiments are conducted on a set of randomly generated instances. The performance of the proposed HDSMO algorithm is investigated and compared with that of other existing algorithms. The detailed results show that the proposed HDSMO algorithm can obtain significantly better solutions than the DSMO and GA algorithms.

Abstract: Operations with Electric Vehicles (EVs) on logistic companies and power utilities are increasingly related due to the charging stations representing the point of standard coupling between transportation and power networks. From this perspective, the Multi-depot Electric Vehicle Routing Problem (MDEVRP) is addressed in this research, considering a novel hybrid matheheuristic approach combining exact approaches and a Chu-Beasley Genetic Algorithm. An existing conflict is shown in three objectives handled through the experimentations: routing cost, cost of charging stations, and increased cost due to energy losses. EVs driving range is chosen as the parameter to perform the sensitivity analysis of the proposed MDEVRP. A 25-customer transportation network conforms to a newly designed test instance for methodology validation, spatially combined with a 33 nodes power distribution system.

Abstract: Reverse auction is an effective tool for a 4PL to purchase transportation services. This paper investigated a new transportation services procurement problem for 4PL, which involves three features: the 4PL’s loss-averse behavior, price and non-price attributes, and multiple transportation requests. An efficient multi-attribute multi-item reverse auction mechanism considering the 4PL ex-ante and ex-post satisfaction (EES-MMRA) is proposed to purchase transportation services for the 4PL. In the EES-MMRA, integrating the allocation rule with the 4PL ex-ante satisfaction, a 0-1 programming model is constructed to determine winning 3PLs and obtain efficient allocations. Then, a payment rule considering the 4PL ex-post satisfaction is established to ensure truthful bidding of 3PLs. And we discuss some desirable properties (e.g., incentive compatibility, individual rationality, efficiency, and budget balance properties) to justify the EES-MMRA mechanism, subsequently. Next, several numerical experiments are conducted to demonstrate the effectiveness and applicability of the EES-MMRA mechanism. Furthermore, sensitivity analysis presents the influences of the weights of the non-price attributes, risk attitude coefficients, and loss aversion coefficients. Finally, we conduct comparison analysis to show the advantages of the EES-MMRA mechanism over the known Vickrey–Clark–Groves (P-VCG) mechanism.

	© 2010 by the authors; licensee Growing Science, Canada. This is an open access article distributed under the terms and conditions of the license. Creative Commons Attribution (CC-BY)