Alavi Nia, A., Zolfaghari, M., Mahmoudi, A. H., Nili, M., & Khodarahmi, H. (2013). Analysis of resistance of concrete target against penetration of eroding long rod projectile regarding flow field around the projectile tip. International Journal of Impact Engineering, 57, 36-42.

Farrahi, G. H., Majzoobi, G. H., Mahmoudi, A. H., & Habibi, N. (2013). Fatigue life of repaired welded tubular joints. International Journal of Engineering, Transactions A: Basics, 26(1), 25-31.

Habibi, N., H-Gangaraj, S. M., Farrahi, G. H., Majzoobi, G. H., Mahmoudi, A. H., Daghigh, M., . . . Moridi, A. (2012). The effect of shot peening on fatigue life of welded tubular joint in offshore structure. Materials and Design, 36, 250-257.

Heidarzadeh, A., Khodaverdizadeh, H., Mahmoudi, A., & Nazari, E. (2012). Tensile behavior of friction stir welded AA 6061-T4 aluminum alloy joints. Materials and Design, 37, 166-173.

Heidarzadeh, A., Saeid, T., Khodaverdizadeh, H., Mahmoudi, A., & Nazari, E. (2013). Establishing a mathematical model to predict the tensile strength of friction stir welded pure copper joints. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 44(1), 175-183.

Hossein Nedjad, S., Meimandi, S., Mahmoudi, A., Abedi, T., Yazdani, S., Shirazi, H., & Nili Ahmadabadi, M. (2009). Effect of aging on the microstructure and tensile properties of fe-ni-mn-cr maraging alloys. Materials Science and Engineering A, 501(1-2), 182-187.

Hosseinzadeh, F., Mahmoudi, A. H., Truman, C. E., & Smith, D. J. (2011). Application of deep hole drilling to the measurement and analysis of residual stresses in steel shrink-fitted assemblies. Strain, 47(SUPPL. 2), 412-426.

Khodaverdizadeh, H., Mahmoudi, A., Heidarzadeh, A., & Nazari, E. (2012). Effect of friction stir welding (FSW) parameters on strain hardening behavior of pure copper joints. Materials and Design, 35, 330-334.

Kingston, E. J., Stefanescu, D., Mahmoudi, A. H., Truman, C. E., & Smith, D. J. (2006). Novel applications of the deep-hole drilling technique for measuring through-thickness residual stress distributions. Journal of ASTM International, 3(4)

Kingston, E. J., Stefanescu, D., Mahmoudi, A. H., Truman, C. E., & Smith, D. J. (2008). Novel applications of the deep-hole drilling technique for measuring through-thickness residual stress distributions. Paper presented at the ASTM Special Technical Publication, , 1497 STP 146-157.

Mahmoudi, A., & Esmailian, M. (2010). Wear behavior of white layer in plasma nitrided H13 steel at ambient and elevated temperatures

Mahmoudi, A., Esmailian, M., & Aghamiri, S. E. (2012). Effect of stabilizing heat treatment on intergranular corrosion resistance of welded stainless steel AISI 321

Mahmoudi, A., Ghavidel, M. R. Z., Nedjad, S. H., Heidarzadeh, A., & Ahmadabadi, M. N. (2011). Aging behavior and mechanical properties of maraging steels in the presence of submicrocrystalline laves phase particles. Materials Characterization, 62(10), 976-981.

Mahmoudi, A., Monfaredi, K., Baghtash, H. F., & Bahrami, A. (2011). Synthesis and analysis of the handheld computer power consumption

Mahmoudi, A. -., Aird, C., Truman, C. E., Mirzaee-Sisan, A., & Smith, D. J. (2006). Generating well defined residual stresses in laboratory specimens. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 2006

Mahmoudi, A. H., Badnava, H., & Pezeshki-Najafabadi, S. M. (2011). An application of chaboche model to predict uniaxial and multiaxial ratcheting. Paper presented at the Procedia Engineering, , 10 1924-1929.

Mahmoudi, A. H., Hossain, S., Truman, C. E., Smith, D. J., & Pavier, M. J. (2009). A new procedure to measure near yield residual stresses using the deep hole drilling technique. Experimental Mechanics, 49(4), 595-604.

Mahmoudi, A. H., & Nourbakhsh, S. H. (2011). A neural networks approach to characterize material properties using the spherical indentation test. Paper presented at the Procedia Engineering, , 10 3062-3067.

Mahmoudi, A. H., Nourbakhsh, S. H., & Amali, R. (2012). An alternative approach to determine material characteristics using spherical indentation and neural networks for bulk metals. Journal of Testing and Evaluation, 40(2), 211-219.

Mahmoudi, A. H., Pavier, M. J., Truman, C. E., & Smith, D. J. (2007). Accurate measurement of highly triaxial residual stresses. Paper presented at the Proceedings of the SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2007, , 3 1836-1843.

Mahmoudi, A. H., Pezeshki-Najafabadi, S. M., & Badnava, H. (2011). Parameter determination of chaboche kinematic hardening model using a multi objective genetic algorithm. Computational Materials Science, 50(3), 1114-1122.

Mahmoudi, A. H., Smith, D. J., Truman, C. E., & Pavier, M. J. (2010). Effect of gauge volume on the residual stress measurement using deep hole drilling technique. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 6 1363-1368.

Mahmoudi, A. -., Smith, D. J., Truman, C. E., & Pavier, M. J. (2010). Application of the modified deep hole drilling technique (iDHD) for measuring near yield non-axisymmetric residual stresses. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 6(PART A) 551-558.

Mahmoudi, A. H., Stefanescu, D., Hossain, S., Truman, C. E., Smith, D. J., & Withers, P. J. (2006). Measurement and prediction of the residual stress field generated by side-punching. Journal of Engineering Materials and Technology, Transactions of the ASME, 128(3), 451-459.

Mahmoudi, A. H., Truman, C. E., & Smith, D. J. (2008). Using local out-of-plane compression (LOPC) to study the effects of residual stress on apparent fracture toughness. Engineering Fracture Mechanics, 75(6), 1516-1534.

Mahmoudi, A. H., Truman, C. E., Smith, D. J., & Pavier, M. J. (2011). The effect of plasticity on the ability of the deep hole drilling technique to measure axisymmetric residual stress. International Journal of Mechanical Sciences, 53(11), 978-988.

Mahmoudi, A. H., Zheng, G., Smith, D. J., Truman, C. E., & Pavier, M. J. (2013). A procedure to measure biaxial near yield residual stresses using the deep hole drilling technique. Experimental Mechanics, 53(7), 1223-1231.

Majzoobi, G. H., Farrahi, G. H., & Mahmoudi, A. H. (2003). A finite element simulation and an experimental study of autofrettage for strain hardened thick-walled cylinders. Materials Science and Engineering A, 359(1-2), 326-331.

Majzoobi, G. H., Mahmoudi, A. H., & Zahirnia, S. (2010). The effect of boring after autofrettage of pressure cylinders. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 6(PART A) 597-602.

Majzoobi, G. H., Sadri, A., Bayat, A., & Mahmoudi, A. H. (2007). A three dimensional numerical study of stress distribution in bolt-nut connections. Paper presented at the Proceedings of the IASTED International Conference on Modelling and Simulation, 452-458.

Mirzaee-Sisan, A., Mahmoudi, A. -., Truman, C. E., & Smith, D. J. (2005). Application of the local approach to predict load history effects in ferritic steels. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 6 331-337.

Paynter, R., Mahmoudi, A. H., Pavier, M. J., Hills, D. A., Nowell, D., Truman, C. E., & Smith, D. J. (2009). Residual stress measurement by deep hole drilling and trepanning - analysis with distributed dislocations. Journal of Strain Analysis for Engineering Design, 44(1), 45-54.

Seifi, R., Mahmoudi, A. H., & Babalhavaeji, M. (2011). J-integral and CMOD for external inclined cracks on autofrettaged cylinders. International Journal of Fracture, 169(2), 199-212.

Smith, D. J., Hadidi-Moud, S., Mahmoudi, A. H., Mirzaee Sisan, A., & Truman, C. E. (2010). Erratum to experiments and predictions of the effects of load history on cleavage fracture in steel [engineering fracture mechanics 77, (2010), 631-645]. Engineering Fracture Mechanics, 77(6), 1030.

Smith, D. J., Hadidi-Moud, S., Mahmoudi, A. H., Sisan, A. M., & Truman, C. E. (2010). Experiments and predictions of the effects of load history on cleavage fracture in steel. Engineering Fracture Mechanics, 77(4), 631-645.