Abazadeh, B., Chakherlou, T. N., Farrahi, G. H., & Alderliesten, R. C. (2013). Fatigue life estimation of bolt clamped and interference fitted-bolt clamped double shear lap joints using multiaxial fatigue criteria. Materials and Design, 43, 327-336.

Azadi, M., Farrahi, G. H., & Moridi, A. (2013). Optimization of air plasma sprayed thermal barrier coating parameters in diesel engine applications. Journal of Materials Engineering and Performance, , 1-9.

Azadi, M., Farrahi, G. H., Winter, G., & Eichlseder, W. (2013). Experimental fatigue lifetime of coated and uncoated aluminum alloy under isothermal and thermo-mechanical loadings. Ceramics International, 39(8), 9099-9107.

Azadi, M., Farrahi, G. H., Winter, G., & Eichlseder, W. (2014). Fatigue lifetime of AZ91 magnesium alloy subjected to cyclic thermal and mechanical loadings. Materials and Design, 53, 639-644.

Azadi, M., Moridi, A., & Farrahi, G. H. (2012). Optimal experiment design for plasma thermal spray parameters at bending loads. International Journal of Surface Science and Engineering, 6(1-2), 3-14.

Faghidian, S. A., Farrahi, G. H., & Smith, D. J. (2012). An analytical solution for inverse determination of residual stress field. Journal of Solid Mechanics, 4(2), 114-127.

Faghidian, S. A., Goudar, D., Farrahi, G. H., & Smith, D. J. (2012). Measurement, analysis and reconstruction of residual stresses. Journal of Strain Analysis for Engineering Design, 47(4), 254-264.

Faghidian, S. A., Moghimi Zand, M., Farjami, Y., & Farrahi, G. H. (2011). Application of homotopy-padé technique to the volterra's prey and predator problem. Applied and Computational Mathematics, 10(2), 262-270.

Farrahi, G. H., Azadi, M., Winter, G., & Eichlseder, W. (2013). A new energy-based isothermal and thermo-mechanical fatigue lifetime prediction model for aluminium-silicon-magnesium alloy. Fatigue and Fracture of Engineering Materials and Structures, 36(12), 1323-1335.

Farrahi, G. H., Faghidian, S. A., & Smith, D. J. (2009). An inverse approach to determination of residual stresses induced by shot peening in round bars. International Journal of Mechanical Sciences, 51(9-10), 726-731.

Farrahi, G. H., Faghidian, S. A., & Smith, D. J. (2010). An inverse method for reconstruction of the residual stress field in welded plates. Journal of Pressure Vessel Technology, Transactions of the ASME, 132(6), 0612051-0612059.

Farrahi, G. H., Faghidian, S. A., & Smith, D. J. (2009). Reconstruction of residual stresses in autofrettaged thick-walled tubes from limited measurements. International Journal of Pressure Vessels and Piping, 86(11), 777-784.

Farrahi, G. H., & Ghadbeigi, H. (2006). An investigation into the effect of various surface treatments on fatigue life of a tool steel. Journal of Materials Processing Technology, 174(1-3), 318-324.

Farrahi, G. H., Hosseinian, E., & Assempour, A. (2008). General variable material property formulation for the solution of autofrettaged thick-walled tubes with constant axial strains. Journal of Pressure Vessel Technology, Transactions of the ASME, 130(4), 0412091-0412097.

Farrahi, G. H., Hosseinian, E., & Assempour, A. (2008). On the material modeling of the autofrettaged pressure vessel steels. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 5 63-70.

Farrahi, G. H., Hosseinian, E., & Assempour, A. (2009). On the material modeling of the autofrettaged pressure vessel steels. Journal of Pressure Vessel Technology, Transactions of the ASME, 131(5)

Farrahi, G. H., Lebrun, J. L., & Couratin, D. (1995). Effect of shot peening on residual stress and fatigue life of a spring steel. Fatigue and Fracture of Engineering Materials and Structures, 18(2), 211-220.

Farrahi, G. H., & Maeder, G. (1992). Experimental study of fretting by means of X-ray diffraction. Fatigue and Fracture of Engineering Materials and Structures, 15(1), 91-102.

Farrahi, G. H., Majzoobi, G. H., & Chinekesh, H. (2005). Effect of contact geometry on fretting fatigue life of aluminium alloy 2024-T3. Indian Journal of Engineering and Materials Sciences, 12(4), 331-336.

Farrahi, G. H., Majzoobi, G. H., & Fadaee, A. (2010). Prediction by genetic algorithm and measurement by center hole drilling of residual stresses of MAG weldment

Farrahi, G. H., Majzoobi, G. H., Hosseinzadeh, F., & Harati, S. M. (2006). Experimental evaluation of the effect of residual stress field on crack growth behaviour in C(T) specimen. Engineering Fracture Mechanics, 73(13), 1772-1782.

Farrahi, G. H., Majzoobi, G. H., Mahmoudi, A. H., & Habibi, N. (2013). Fatigue life of repaired welded tubular joints. International Journal of Engineering, Transactions A: Basics, 26(1), 25-31.

Farrahi, G. H., Markho, P. H., & Maeder, G. (1991). A study of fretting wear with particular reference to measurement of residual stresses by X-ray diffraction. Wear, 148(2), 249-260.

Farrahi, G. H., & Mohajerani, A. (2007). Effect of residual stress on stress intensity factors of fretting fatigue cracks. International Journal of Microstructure and Materials Properties, 2(2), 164-177.

Farrahi, G. H., & Sistaninia, M. (2009). Thermal analysis of laser hardening for different moving patterns. International Journal of Engineering, Transactions A: Basics, 22(2), 169-180.

Farrahi, G. H., Tirehdast, M., Masoumi Khalil Abad, E., Parsa, S., & Motakefpoor, M. (2011). Failure analysis of a gas turbine compressor. Engineering Failure Analysis, 18(1), 474-484.

Farrahi, G. H., Voyiadjis, G. Z., Hoseini, S. H., & Hosseinian, E. (2012). Residual stress analyses of re-autofrettaged thick-walled tubes. International Journal of Pressure Vessels and Piping, 98, 57-64.

Gangaraj, S. M. H., & Farrahi, G. H. (2011). Side effects of shot peening on fatigue crack initiation life. International Journal of Engineering, Transactions A: Basics, 24(3), 275-280.

Gangaraj, S. M. H., Guagliano, M., & Farrahi, G. H. (2012). An approach to relate shot peening finite element simulation to the actual coverage. Surface and Coatings Technology,

Ghorashi, M. S., Farrahi, G. H., & Eftekhari, M. R. (2012). Effects of temperature on wear behavior of a plasma sprayed diesel engine cylinder. SAE Technical Papers,

GolamHossain, M., GolamHossain, F., & Fadaee, A. (2009). Probabilistic analysis of welding residual stress on fatigue crack growth. Arabian Journal for Science and Engineering, 34(1 C), 195-205.

Habibi, N., H-Gangaraj, S. M., Farrahi, G. H., Majzoobi, G. H., Mahmoudi, A. H., Daghigh, M., . . . Moridi, A. (2012). The effect of shot peening on fatigue life of welded tubular joint in offshore structure. Materials and Design, 36, 250-257.

Haghpanah Jahromi, B., Farrahi, G. H., Maleki, M., Nayeb-Hashemi, H., & Vaziri, A. (2009). Residual stresses in autofrettaged vessel made of functionally graded material. Engineering Structures, 31(12), 2930-2935.

Hamed, M. A., Nosier, A., & Farrahi, G. H. (2006). Separation of delamination modes in composite beams with symmetric delaminations. Materials and Design, 27(10), 900-910.

Hassani, A., Hojjati, M. H., Farrahi, G., & Alashti, R. A. (2011). Semi-exact elastic solutions for thermo-mechanical analysis of functionally graded rotating disks. Composite Structures, 93(12), 3239-3251.

Hassani, A., Hojjati, M. H., Farrahi, G. H., & Alashti, R. A. (2012). Semi-exact solution for thermo-mechanical analysis of functionally graded elastic-strain hardening rotating disks. Communications in Nonlinear Science and Numerical Simulation, 17(9), 3747-3762.

Hassani, A., Hojjati, M. H., Mahdavi, E., Alashti, R. A., & Farrahi, G. (2012). Thermo-mechanical analysis of rotating disks with non-uniform thickness and material properties. International Journal of Pressure Vessels and Piping, 98, 95-101.

Hassani-Gangaraj, S. M., Guagliano, M., & Farrahi, G. H. (2011). Finite element simulation of shot peening coverage with the special attention on surface nanocrystallization. Paper presented at the Procedia Engineering, , 10 2464-2471.

H-Gangaraj, S. M., Alvandi-Tabrizi, Y., Farrahi, G. H., Majzoobi, G. H., & Ghadbeigi, H. (2011). Finite element analysis of shot-peening effect on fretting fatigue parameters. Tribology International, 44(11), 1583-1588.

H-Gangaraj, S. M., Farrahi, G. H., & Ghadbeigi, H. (2010). On the temperature and residual stress field during grinding. Paper presented at the WCE 2010 - World Congress on Engineering 2010, , 2 1196-1200.

Hoseini, S. H., Pirbodaghi, T., Ahmadian, M. T., & Farrahi, G. H. (2009). On the large amplitude free vibrations of tapered beams: An analytical approach. Mechanics Research Communications, 36(8), 892-897.

Hoseini, S. H., Pirbodaghi, T., Asghari, M., Farrahi, G. H., & Ahmadian, M. T. (2008). Nonlinear free vibration of conservative oscillators with inertia and static type cubic nonlinearities using homotopy analysis method. Journal of Sound and Vibration, 316(1-5), 263-273.

Hosseinian, E., Farrahi, G. H., & Movahhedy, M. R. (2008). An analytical framework for the solution of autofrettaged tubes under constant axial strain condition. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 5 71-80.

Hosseinian, E., Farrahi, G. H., & Movahhedy, M. R. (2009). An analytical framework for the solution of autofrettaged tubes under constant axial strain condition. Journal of Pressure Vessel Technology, Transactions of the ASME, 131(6)

Kargarnovin, M. H., Faghidian, S. A., Farjami, Y., & Farrahi, G. H. (2010). Application of homotopy-padé technique in limit analysis of circular plates under arbitrary rotational symmetric loading using von-mises yield criterion. Communications in Nonlinear Science and Numerical Simulation, 15(4), 1080-1091.

Majzoobi, G. H., Farrahi, G. H., & Habibi, N. (2005). Experimental evaluation of the effect of thread pitch on fatigue life of bolts. International Journal of Fatigue, 27(2), 189-196.

Majzoobi, G. H., Farrahi, G. H., Hardy, S. J., Pipelzadeh, M. K., & Habibi, N. (2005). Experimental results and finite-element predictions of the effect of nut geometry, washer and teflon tape on the fatigue life of bolts. Fatigue and Fracture of Engineering Materials and Structures, 28(6), 557-564.

Majzoobi, G. H., Farrahi, G. H., & Mahmoudi, A. H. (2003). A finite element simulation and an experimental study of autofrettage for strain hardened thick-walled cylinders. Materials Science and Engineering A, 359(1-2), 326-331.

Majzoobi, G. H., Farrahi, G. H., Pipelzadeh, M. K., & Akbari, A. (2004). Experimental and finite element prediction of bursting pressure in compound cylinders. International Journal of Pressure Vessels and Piping, 81(12), 889-896.

Majzoobi, G. H., Nemati, J., Novin Rooz, A. J., & Farrahi, G. H. (2009). Modification of fretting fatigue behavior of AL7075-T6 alloy by the application of titanium coating using IBED technique and shot peening. Tribology International, 42(1), 121-129.

Maleki, M., Farrahi, G. H., Haghpanah Jahromi, B., & Hosseinian, E. (2010). Residual stress analysis of autofrettaged thick-walled spherical pressure vessel. International Journal of Pressure Vessels and Piping, 87(7), 396-401.

Masoumi Khalil Abad, E., Farrahi, G. H., Masoumi Khalil Abad, M., Zare, A. A., & Parsa, S. (2013). Failure analysis of a gas turbine compressor in a thermal power plant. Journal of Failure Analysis and Prevention, 13(3), 313-319.

Mohajerani, A., & Farrahi, G. H. (2008). Investigation of the effect of pad geometry on flat and rounded fretting fatigue. Scientia Iranica, 15(3), 332-339.

Mohajerani, A., & Farrahi, G. H. (2010). Numerical investigation of crack orientation in the fretting fatigue of a flat rounded contact. International Journal of Engineering, Transactions B: Applications, 23(3-4), 223-232.

Mohammadi, M., Farrahi, G. H., & Hoseini, S. H. (2008). Bauschinger effect investigation of an aluminum alloy, and its application in autofrettaged and compound tubes. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 6 629-637.

Mohammadi, M., Farrahi, G. H., & Hoseini, S. H. (2008). Determination of residual stresses in autofrettaged compound tubes for different geometries. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 5 53-61.

Mohammadi, M., Farrahi, G. H., & Hoseini, S. H. (2008). Material removal simulation of aluminum compound tubes with incorporating real unloading behavior. Paper presented at the American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, , 3 195-201.

Moridi, A., Azadi, M., & Farrahi, G. H. (2011). Coating thickness and roughness effect on stress distribution of A356.0 under thermo-mechanical loadings. Paper presented at the Procedia Engineering, , 10 1372-1377.

Moridi, A., Azadi, M., & Farrahi, G. H. (2011). Numerical simulation of thermal barrier coating system under thermo-mechanical loadings. Paper presented at the Proceedings of the World Congress on Engineering 2011, WCE 2011, , 3 1959-1964.

Moridi, A., Azadi, M., & Farrahi, G. H. (2012). Thermo-mechanical stress analysis of thermal barrier coating system considering thickness and roughness effects. Surface and Coatings Technology,

Norouznejad, H., & Farrahi, G. H. (2011). Numerical simulation of induction hardening of torsion bar. Paper presented at the Proceedings of the World Congress on Engineering 2011, WCE 2011, , 3 2080-2083.

Pirbodaghi, T., Hoseini, S. H., Ahmadian, M. T., & Farrahi, G. H. (2009). Duffing equations with cubic and quintic nonlinearities. Computers and Mathematics with Applications, 57(3), 500-506.

Rashed, G., Ghajar, R., & Farrahi, G. (2007). Multiaxial stress-strain modeling and effect of additional hardening due to nonproportional loading. Journal of Mechanical Science and Technology, 21(8), 1153-1161.

Razavi, A., Hafezi, F., & Farrahi, H. (2012). FEM prediction of welding residual stresses and temperature fields in butt and T-welded joints

Smith, D. J., Farrahi, G. H., Zhu, W. X., & McMahon, C. A. (2001). Experimental measurement and finite element simulation of the interaction between residual stresses and mechanical loading. International Journal of Fatigue, 23(4), 293-302.

Smith, D. J., Farrahi, G. H., Zhu, W. X., & McMahon, C. A. (2001). Obtaining multiaxial residual stress distributions from limited measurements. Materials Science and Engineering A, 303(1-2), 281-291.

Tadi Beni, Y., Movahhedy, M. R., & Farrahi, G. H. (2010). A complete treatment of thermo-mechanical ale analysis; part 2: Finite element equations and applications. Iranian Journal of Science and Technology, Transaction B: Engineering, 34(2), 149-165.

Tadi Beni, Y., Movahhedy, M. R., & Farrahi, G. H. (2010). A complete treatment of thermo-mechanical ale analysis; part I: Formulation. Iranian Journal of Science and Technology, Transaction B: Engineering, 34(2), 135-148.

Tadi Beni, Y., Movahhedy, M. R., & Farrahi, G. H. (2009). Rate-dependent dynamic ALE analysis of finite deformation of elasto-viscoplastic solids. Materials and Design, 30(8), 2995-3004.

Voyiadjis, G. Z., Hoseini, S. H., & Farrahi, G. H. (2013). A plasticity model for metals with dependency on all the stress invariants. Journal of Engineering Materials and Technology, Transactions of the ASME, 135(1)

Voyiadjis, G. Z., Hoseini, S. H., & Farrahi, G. H. (2012). Effects of stress invariants and reverse loading on ductile fracture initiation. International Journal of Solids and Structures, 49(13), 1541-1556.