Ayatollahi, M.R., Aliha, M.R.M., Hassani, M.M. Mixed mode brittle fracture in PMMA - An experimental study using SCB specimens (2006) Materials Science and Engineering A, 417 (1-2), pp. 348-356.

Ayatollahi, M.R., Aliha, M.R.M. Wide range data for crack tip parameters in two disc-type specimens under mixed mode loading (2007) Computational Materials Science, 38 (4), pp. 660-670.

Ayatollahi, M.R., Aliha, M.R.M. On the use of Brazilian disc specimen for calculating mixed mode I-II fracture toughness of rock materials (2008) Engineering Fracture Mechanics, 75 (16), pp. 4631-4641.

Aliha, M.R.M., Ayatollah, M.R., Smith, D.J., Pavier, M.J. Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading (2010) Engineering Fracture Mechanics, 77 (11), pp. 2200-2212.

Ayatollahi, M.R., Aliha, M.R.M. Fracture toughness study for a brittle rock subjected to mixed mode I/II loading (2007) International Journal of Rock Mechanics and Mining Sciences, 44 (4), pp. 617-624.

Ayatollahi, M.R., Aliha, M.R.M., Saghafi, H. An improved semi-circular bend specimen for investigating mixed mode brittle fracture (2011) Engineering Fracture Mechanics, 78 (1), pp. 110-123.

Ayatollahi, M.R., Aliha, M.R.M. Analysis of a new specimen for mixed mode fracture tests on brittle materials (2009) Engineering Fracture Mechanics, 76 (11), pp. 1563-1573.

Ayatollahi, M.R., Aliha, M.R.M. On determination of mode II fracture toughness using semi-circular bend specimen (2006) International Journal of Solids and Structures, 43 (17), pp. 5217-5227.

Ayatollahi, M.R., Aliha, M.R.M. Cracked Brazilian disc specimen subjected to mode II deformation (2005) Engineering Fracture Mechanics, 72 (4), pp. 493-503.

Aliha, M.R.M., Ayatollahi, M.R., Akbardoost, J. Typical upper bound-lower bound mixed mode fracture resistance envelopes for rock material (2012) Rock Mechanics and Rock Engineering, 45 (1), pp. 65-74.

Aliha, M.R.M., Ashtari, R., Ayatollahi, M.R. Mode I and mode II fracture toughness testing for a coarse grain marble (2006) Applied Mechanics and Materials, 5-6, pp. 181-188.

Ayatollahi, M.R., Aliha, M.R.M. Mixed mode fracture in soda lime glass analyzed by using the generalized MTS criterion (2009) International Journal of Solids and Structures, 46 (2), pp. 311-321.

Aliha, M.R.M., Hosseinpour, G.R., Ayatollahi, M.R. Application of cracked triangular specimen subjected to three-point bending for investigating fracture behavior of rock materials (2013) Rock Mechanics and Rock Engineering, 46 (5), pp. 1023-1034.

Aliha, M.R.M., Sistaninia, M., Smith, D.J., Pavier, M.J., Ayatollahi, M.R. Geometry effects and statistical analysis of mode I fracture in guiting limestone (2012) International Journal of Rock Mechanics and Mining Sciences, 51, pp. 128-135.

Ayatollahi, M.R., Aliha, M.R.M. Mixed mode fracture analysis of polycrystalline graphite - A modified MTS criterion (2008) Carbon, 46 (10), pp. 1302-1308.

Ameri, M., Mansourian, A., Heidary Khavas, M., Aliha, M.R.M., Ayatollahi, M.R. Cracked asphalt pavement under traffic loading - A 3D finite element analysis (2011) Engineering Fracture Mechanics, 78 (8), pp. 1817-1826.

Aliha, M.R.M., Ayatollahi, M.R. Geometry effects on fracture behaviour of polymethyl methacrylate (2010) Materials Science and Engineering A, 527 (3), pp. 526-530.

Ameri, M., Mansourian, A., Pirmohammad, S., Aliha, M.R.M., Ayatollahi, M.R. Mixed mode fracture resistance of asphalt concrete mixtures (2012) Engineering Fracture Mechanics, 93, pp. 153-167.

Aliha, M.R.M., Ayatollahi, M.R., Pakzad, R. Brittle fracture analysis using a ring-shape specimen containing two angled cracks (2008) International Journal of Fracture, 153 (1), pp. 63-68.

Aliha, M.R.M., Ayatollahi, M.R. Brittle fracture evaluation of a fine grain cement mortar in combined tensile-shear deformation (2009) Fatigue and Fracture of Engineering Materials and Structures, 32 (12), pp. 987-994.

Aliha, M.R.M., Ayatollahi, M.R. Two-parameter fracture analysis of SCB rock specimen under mixed mode loading (2013) Engineering Fracture Mechanics, 103, pp. 115-123.

Aliha, M.R.M., Behbahani, H., Fazaeli, H., Rezaifar, M.H. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures (2014) Construction and Building Materials, 54, pp. 623-635.

Aliha, M.R.M., Ayatollahi, M.R. Mixed mode I/II brittle fracture evaluation of marble using SCB specimen (2011) Procedia Engineering, 10, pp. 311-318.

Mirsayar, M.M., Berto, F., Aliha, M.R.M., Park, P. Strain-based criteria for mixed-mode fracture of polycrystalline graphite (2016) Engineering Fracture Mechanics, 156, pp. 114-123.

Aliha, M.R.M., Ayatollahi, M.R. Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading - A statistical approach (2014) Theoretical and Applied Fracture Mechanics, 69, pp. 17-25.

Mirsayar, M.M., Aliha, M.R.M., Samaei, A.T. On fracture initiation angle near bi-material notches - Effects of first non-singular stress term (2014) Engineering Fracture Mechanics, 119, pp. 124-131.

Aliha, M.R.M., Bahmani, A., Akhondi, S. Numerical analysis of a new mixed mode I/III fracture test specimen (2015) Engineering Fracture Mechanics, 134, pp. 95-110.

Aliha, M.R.M., Bahmani, A., Akhondi, S. Determination of mode III fracture toughness for different materials using a new designed test configuration (2015) Materials and Design, 86, pp. 863-871.

Ayatollahi, M.R., Aliha, M.R.M. Fracture analysis of some ceramics under mixed mode loading (2011) Journal of the American Ceramic Society, 94 (2), pp. 561-569.

Aliha, M.R.M., Ayatollahi, M.R. On mixed-mode I/II crack growth in dental resin materials (2008) Scripta Materialia, 59 (2), pp. 258-261.

Aliha, M.R.M., Ayatollahi, M.R. Analysis of fracture initiation angle in some cracked ceramics using the generalized maximum tangential stress criterion (2012) International Journal of Solids and Structures, 49 (13), pp. 1877-1883.

Heidari-Rarani, M., Aliha, M.R.M., Shokrieh, M.M., Ayatollahi, M.R. Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings - An experimental study (2014) Construction and Building Materials, 64, pp. 308-315.

Aliha, M.R.M., Fazaeli, H., Aghajani, S., Moghadas Nejad, F. Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures (2015) Construction and Building Materials, 95, art. no. 6980, pp. 545-555.

Aliha, M.R.M., Bahmani, A., Akhondi, S. A novel test specimen for investigating the mixed mode I+III fracture toughness of hot mix asphalt composites - Experimental and theoretical study (2016) International Journal of Solids and Structures, 90, pp. 167-177.

Akbardoost, J., Ayatollahi, M.R., Aliha, M.R.M., Pavier, M.J., Smith, D.J. Size-dependent fracture behavior of Guiting limestone under mixed mode loading (2014) International Journal of Rock Mechanics and Mining Sciences, 71, pp. 369-380.

Aliha, M.R.M., Saghafi, H. The effects of thickness and Poisson's ratio on 3D mixed-mode fracture (2013) Engineering Fracture Mechanics, 98 (1), pp. 15-28.

Aliha, M.R.M., Heidari-Rarani, M., Shokrieh, M.M., Ayatollahi, M.R. Experimental determination of tensile strength and KIc of polymer concretes using semi-circular bend (SCB) specimens (2012) Structural Engineering and Mechanics, 43 (6), pp. 823-833.

Ameri, M., Nowbakht, S., Molayem, M., Aliha, M.R.M. Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes (2016) Fatigue and Fracture of Engineering Materials and Structures, 39 (7), pp. 896-906.

Aliha, M.R.M., Berto, F., Bahmani, A., Akhondi, S., Barnoush, A. Fracture assessment of polymethyl methacrylate using sharp notched disc bend specimens under mixed mode I + III loading (2016) Physical Mesomechanics, 19 (4), pp. 355-364.

Aliha, M.R.M., Ayatollahi, M.R., Kharazi, B. Mode II brittle fracture assessment using ASFPB specimen (2009) International Journal of Fracture, 159 (2), pp. 241-246.

Aliha, M.R.M. Indirect tensile test assessments for rock materials using 3-D disc-type specimens (2013) Arabian Journal of Geosciences, 7 (11), pp. 4757-4766.

Aliha, M.R.M., Bahmani, A., Akhondi, S. Mixed mode fracture toughness testing of PMMA with different three-point bend type specimens (2016) European Journal of Mechanics, A/Solids, 58, pp. 148-162.

Razavi, S.M.J., Aliha, M.R.M., Berto, F. Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens (2017) Theoretical and Applied Fracture Mechanics, . Article in Press.

Ayatollahi, M.R., Aliha, M.R.M. Fracture parameters for a cracked semi-circular specimen (2004) International Journal of Rock Mechanics and Mining Sciences, 41 (SUPPL. 1), pp. 1A 04 1-6.

Samaei, A.T., Aliha, M.R.M., Mirsayar, M.M. Frequency analysis of a graphene sheet embedded in an elastic medium with consideration of small scale (2015) Materials Physics and Mechanics, 22 (2), pp. 125-135.

Aliha, M.R.M., Pakzad, R., Ayatollahi, M.R. Numerical analyses of a cracked straight-through flattened brazilian disk specimen under mixed-mode loading (2014) Journal of Engineering Mechanics, 140 (1), pp. 219-224.

Bahmani, A., Aliha, M.R.M., Berto, F. Investigation of fracture toughness for a polycrystalline graphite under combined tensile-tear deformation (2017) Theoretical and Applied Fracture Mechanics, 90, pp. 53-64.

Fakhri, M., Amoosoltani, E., Aliha, M.R.M. Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber (2017) Engineering Fracture Mechanics, 180, pp. 43-59.

Aliha, M.R.M., Fattahi Amirdehi, H.R. Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents (2017) Fatigue and Fracture of Engineering Materials and Structures, 40 (1), pp. 55-68.

Behbahani, H., Mohammad Aliha, R.M., Fazaeli, H., Aghajani, S. Experimental fracture toughness study for some modified asphalt mixtures (2013) Advanced Materials Research, 723, pp. 337-344.

Torabi, A.R., Aliha, M.R.M. Determination of permissible defect size for solid axles loaded under fully-reversed rotating bending (2013) Engineering Solid Mechanics, 1 (1), pp. 27-36.

Ayatollahi, M.R., Aliha, M.R.M. On the use of an anti-symmetric four-point bend specimen for mode II fracture experiments (2011) Fatigue and Fracture of Engineering Materials and Structures, 34 (11), pp. 898-907.

Aliha, M.R.M., Behbahani, H., Fazaeli, H., Rezaifar, M.H. Experimental study on mode I fracture toughness of different asphalt mixtures (2015) Scientia Iranica, 22 (1), pp. 120-130.

Aliha, M.R.M., Berto, F., Mousavi, A., Razavi, S.M.J. On the applicability of ASED criterion for predicting mixed mode I+II fracture toughness results of a rock material (2017) Theoretical and Applied Fracture Mechanics, 92, pp. 198-204.

Aliha, M.R.M., Razmi, A., Mansourian, A. The influence of natural and synthetic fibers on low temperature mixed mode I + II fracture behavior of warm mix asphalt (WMA) materials (2017) Engineering Fracture Mechanics, 182, pp. 322-336.

Dehghany, M., Saeidi Googarchin, H., Aliha, M.R.M. The role of first non-singular stress terms in mixed mode brittle fracture of V-notched components: an experimental study (2017) Fatigue and Fracture of Engineering Materials and Structures, 40 (4), pp. 623-641.

Aliha, M.R.M., Berto, F., Bahmani, A., Gallo, P. Mixed mode I/II fracture investigation of Perspex based on the averaged strain energy density criterion (2017) Physical Mesomechanics, 20 (2), pp. 149-156.

Aliha, M.R.M., Mahdavi, E., Ayatollahi, M.R. The Influence of Specimen Type on Tensile Fracture Toughness of Rock Materials (2017) Pure and Applied Geophysics, 174 (3), pp. 1237-1253.

Aliha, M.R.M., Sarbijan, M.J., Bahmani, A. Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations (2017) Construction and Building Materials, 155, pp. 789-799.

Aliha, M.R.M., Bahmani, A. Rock Fracture Toughness Study Under Mixed Mode I/III Loading (2017) Rock Mechanics and Rock Engineering, 50 (7), pp. 1739-1751.

Aliha, M.R.M., Ayatollahi, M.R., Kharazi, B. Numerical and experimental investigations of mixed mode fracture in granite using four-point-bend specimen (2009) Damage and Fracture Mechanics: Failure Analysis of Engineering Materials and Structures, pp. 275-283.

Aliha, M.R.M., Shahheidari, M., Bisadi, M., Akbari, M., Hossain, S. Mechanical and metallurgical properties of dissimilar AA6061-T6 and AA7277-T6 joint made by FSW technique (2016) International Journal of Advanced Manufacturing Technology, 86 (9-12), pp. 2551-2565.

Samaei, A.T., Mirsayar, M.M., Aliha, M.R.M. The microstructure and mechanical behavior of modern high temperature alloys (2015) Engineering Solid Mechanics, 3 (1), pp. 1-20.

Nasiraldin Mirlohi, S., Aliha, M.R.M. Crack growth path prediction for the angled cracked plate using higher order terms of williams series expansion (2013) Engineering Solid Mechanics, 1 (3), pp. 77-84.

Aliha, M.R.M., Rezaei, M. Experimental and theoretical study of fracture paths in brittle cracked materials subjected to pure mode II loading (2011) Applied Mechanics and Materials, 70, pp. 159-164.

Aliha, M.R.M., Gharehbaghi, H. The effect of combined mechanical load/welding residual stress on mixed mode fracture parameters of a thin aluminum cracked cylinder (2017) Engineering Fracture Mechanics, 180, pp. 213-228.

Mohammad Aliha, M.R., Fotouhi, Y., Berto, F. Experimental notched fracture resistance study for the interface of Al–Cu bimetal joints welded by friction stir welding (2017) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, . Article in Press.

Mousavi, A., Aliha, M.R.M. Determination of fracture parameters for a bi-material center cracked plate subjected to biaxial loading using FEOD method (2016) Engineering Solid Mechanics, 4 (3), pp. 117-124.

Aliha, M.R.M., Ameri, M., Mansourian, A., Ayatollahi, M.R. Finite element analysis of a new test specimen for investigating mixed mode cracks in asphalt overlays (2012) RILEM Bookseries, 4, pp. 359-367.

Aliha, M.R.M., Sarbijan, M.J. Effects of loading, geometry and material properties on fracture parameters of a pavement containing top-down and bottom-up cracks (2016) Engineering Fracture Mechanics, 166, pp. 182-197.

Fakhri, M., Haghighat Kharrazi, E., Aliha, M.R.M., Berto, F. The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes (2018) Frattura ed Integrita Strutturale, 12 (43), pp. 113-132.

Aliha, M.R.M., Linul, E., Bahmani, A., Marsavina, L. Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+III loading (2018) Polymer Testing, 67, pp. 75-83.

Rooholamini, H., Hassani, A., Aliha, M.R.M. Evaluating the effect of macro-synthetic fibre on the mechanical properties of roller-compacted concrete pavement using response surface methodology (2018) Construction and Building Materials, 159, pp. 517-529.

Aliha, M.R.M., Bahmani, A., Akhondi, S. Fracture and fatigue analysis for a cracked carabiner using 3D finite element simulations (2015) Strength of Materials, 47 (6), pp. 890-902.

Bohlouri, V., Kosari, A.R., Aliha, M.R.M. Systematic design of an atmospheric data acquisition flying vehicle telemetry system (2014) Engineering Solid Mechanics, 2 (4), pp. 265-276.

Fakhri, M., Haghighat Kharrazi, E., Aliha, M.R.M. Mixed mode tensile – In plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions (2018) Engineering Fracture Mechanics, 192, pp. 98-113.

Aliha, M.R.M., Mahdavi, E., Ayatollahi, M.R. Statistical Analysis of Rock Fracture Toughness Data Obtained from Different Chevron Notched and Straight Cracked Mode I Specimens (2018) Rock Mechanics and Rock Engineering, pp. 1-20. Article in Press.

Mirsayar, M.M., Razmi, A., Aliha, M.R.M., Berto, F. EMTSN criterion for evaluating mixed mode I/II crack propagation in rock materials (2018) Engineering Fracture Mechanics, 190, pp. 186-197.

Haghighat Pour, P.J., Aliha, M.R.M., Keymanesh, M.R. Evaluating mode I fracture resistance in asphalt mixtures using edge notched disc bend ENDB specimen with different geometrical and environmental conditions (2018) Engineering Fracture Mechanics, 190, pp. 245-258.

Daneshfar, M., Hassani, A., Aliha, M.R.M., Berto, F. Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents (2017) Strength of Materials, 49 (5), pp. 618-626.

Aliha, M.R.M., Ayatollahi, M.R., Smith, D.J., Pavier, M.J. Geometry and loading effects on pure mode II fracture toughness of rock materials (2011) 45th US Rock Mechanics / Geomechanics Symposium, 6 p.

Ayatollahi, M.R., Aliha, M.R.M., Kharazi, B. On validation of anti symmetric four-point bend specimen for determining mode II fracture toughness of rocks (2009) 12th International Conference on Fracture 2009, ICF-12, 7, pp. 5586-5594.

Aliha, M.R.M., Ayatollahi, M.R. Crack growth resistance of alumina and zirconia ceramics under mixed mode I-II deformation (2009) 12th International Conference on Fracture 2009, ICF-12, 2, pp. 1316-1323.

Ayatollahi, M.R., Aliha, M.R.M., Smith, D.J., Pavier, M.J. Statistical fracture toughness analysis of Guiting limestone using disc shape test specimens (2009) 12th International Conference on Fracture 2009, ICF-12, 7, pp. 5070-5079.

Aliha, M.R.M., Ayatollahi, M.R. Using centrally cracked ring specimen for investigating mixed mode fracture toughness of rocks (2008) 42nd U.S. Rock Mechanics - 2nd U.S.-Canada Rock Mechanics Symposium, 5 p.

Ayatollahi, M.R., Aliha, M.R.M., Rahmanian, S. Finite element analysis of an improved center crack specimen (2007) Key Engineering Materials, 347, pp. 441-446.

Ayatollahi, M.R., Aliha, M.R.M. Predictions of mixed mode I/II fracture toughness for soft rocks (2006) Fracture of Nano and Engineering Materials and Structures - Proceedings of the 16th European Conference of Fracture, pp. 1173-1174.