Editorial member


R. V. Rao S.V. National Institute of Technology, Ichchanath, Surat, Gujarat – 395 007, India
Email: ravipudirao@gmail.com


Ravipudi Venkata Rao

Rao, R.V., Keesari, H.S., Oclon, P., Taler, J. An adaptive multi-team perturbation-guiding Jaya algorithm for optimization and its applications (2019) Engineering with Computers, . Article in Press.

Migallón, H., Jimeno-Morenilla, A., Sánchez-Romero, J.L., Rico, H., Rao, R.V. Multipopulation-based multi-level parallel enhanced Jaya algorithms (2019) Journal of Supercomputing, . Article in Press.

Rao, R.V., Saroj, A., Oclon, P., Taler, J., Lakshmi, J. A Posteriori Multiobjective Self-Adaptive Multipopulation Jaya Algorithm for Optimization of Thermal Devices and Cycles (2019) IEEE Access, 7, art. no. 8572683, pp. 4113-4134.

García-Monzó, A., Migallón, H., Jimeno-Morenilla, A., Sánchez-Romero, J.-L., Rico, H., Rao, R.V. Efficient subpopulation based parallel TLBO optimization algorithms (2019) Electronics (Switzerland), 8 (1), art. no. 19, .

Rao, R.V., Rai, D.P., Balic, J. Multi-objective optimization of machining and micro-machining processes using non-dominated sorting teaching–learning-based optimization algorithm (2018) Journal of Intelligent Manufacturing, 29 (8), pp. 1715-1737.

Rao, R.V., Keesari, H.S. Multi-team perturbation guiding Jaya algorithm for optimization of wind farm layout (2018) Applied Soft Computing Journal, 71, pp. 800-815.

Rao, R.V., Saroj, A., Ocloń, P., Taler, J., Taler, D. Single- and Multi-Objective Design Optimization of Plate-Fin Heat Exchangers Using Jaya Algorithm (2018) Heat Transfer Engineering, 39 (13-14), pp. 1201-1216.

Rao, R.V. Jaya: An advanced optimization algorithm and its engineering applications (2018) Jaya: An Advanced Optimization Algorithm and its Engineering Applications, pp. 1-334.

Rao, R.V., Saroj, A. Multi-objective design optimization of heat exchangers using elitist-Jaya algorithm (2018) Energy Systems, 9 (2), pp. 305-341.

Rao, R.V., Saroj, A. An elitism-based self-adaptive multi-population Jaya algorithm and its applications (2018) Soft Computing, pp. 1-24. Article in Press.

Rao, R.V., Saroj, A., Bhattacharyya, S. Design optimization of heat pipes using elitism-based self-adaptive multipopulation Jaya algorithm (2018) Journal of Thermophysics and Heat Transfer, 32 (3), pp. 702-712.

Dede, T., Kripka, M., Toǧan, V., Yepes, V., Rao, R.V. Advanced Optimization Techniques and Their Applications in Civil Engineering (2018) Advances in Civil Engineering, 2018, art. no. 5913083, .

Ocłoń, P., Cisek, P., Rerak, M., Taler, D., Rao, R.V., Vallati, A., Pilarczyk, M. Thermal performance optimization of the underground power cable system by using a modified Jaya algorithm (2018) International Journal of Thermal Sciences, 123, pp. 162-180.

Kamble, A.G., Rao, R.V. Effects of process parameters of GMAW on bead geometry, tensile strength, hardness, microstructure and thermo-mechanical simulation of AISI 202 steel (2017) Indian Journal of Engineering and Materials Sciences, 24 (6), pp. 413-428.

Venkata Rao, R., Saroj, A. A self-adaptive multi-population based Jaya algorithm for engineering optimization (2017) Swarm and Evolutionary Computation, 37, pp. 1-26.

Rao, R.V., Rai, D.P., Balic, J. Multi-objective optimization of abrasive waterjet machining process using Jaya algorithm and PROMETHEE Method (2017) Journal of Intelligent Manufacturing, pp. 1-27. Article in Press.

Rao, R.V., More, K.C., Taler, J., Ocłoń, P. Multi-objective optimization of thermo-acoustic devices using teaching-learning-based optimization algorithm (2017) Science and Technology for the Built Environment, 23 (8), pp. 1244-1252.

Rao, R.V., More, K.C. Optimal design and analysis of mechanical draft cooling tower using improved Jaya algorithm [Conception optimale et analyse d'une tour de refroidissement à convection mécanique grâce à un algorithme Jaya amélioré] (2017) International Journal of Refrigeration, 82, pp. 312-324.

Rao, R.V., Rai, D.P. Optimisation of welding processes using quasi-oppositional-based Jaya algorithm (2017) Journal of Experimental and Theoretical Artificial Intelligence, 29 (5), pp. 1099-1117.

Rao, R.V., Rai, D.P. Optimization of submerged arc welding process parameters using quasi-oppositional based Jaya algorithm (2017) Journal of Mechanical Science and Technology, 31 (5), pp. 2513-2522.

Rao, R.V., Rai, D.P., Balic, J. A multi-objective algorithm for optimization of modern machining processes (2017) Engineering Applications of Artificial Intelligence, 61, pp. 103-125.

Rao, R.V., More, K.C., Coelho, L.S., Mariani, V.C. Multi-objective optimization of the Stirling heat engine through self-adaptive Jaya algorithm (2017) Journal of Renewable and Sustainable Energy, 9 (3), art. no. 033703, .

Rao, R.V., Waghmare, G.G. A new optimization algorithm for solving complex constrained design optimization problems (2017) Engineering Optimization, 49 (1), pp. 60-83.

Rao, R.V., Saroj, A. Constrained economic optimization of shell-and-tube heat exchangers using elitist-Jaya algorithm (2017) Energy, 128, pp. 785-800.

Rao, R.V., More, K.C. Design optimization and analysis of selected thermal devices using self-adaptive Jaya algorithm (2017) Energy Conversion and Management, 140, pp. 24-35.

Rao, R.V., Saroj, A. Economic optimization of shell-and-tube heat exchanger using Jaya algorithm with maintenance consideration (2017) Applied Thermal Engineering, 116, pp. 473-487.

Venkata Rao, R., Rai, D.P., Balic, J. A new optimization algorithm for parameter optimization of nano-finishing processes (2017) Scientia Iranica, 24 (2), pp. 868-875.

Rao, R.V., More, K.C., Taler, J., Oclon, P. Corrigendum to “Dimensional optimization of a micro-channel heat sink using Jaya algorithm” [Appl. Therm. Eng. 103 (2016) 572–582](Applied Thermal Engineering(S1359431116306214)(10.1016/j.applthermaleng.2016.04.135)) (2017) Applied Thermal Engineering, 122, p. 831.

Wang, S., Rao, R.V., Chen, P., Zhang, Y., Liu, A., Wei, L. Abnormal breast detection in mammogram images by feed-forward neural network trained by Jaya algorithm (2017) Fundamenta Informaticae, 151 (1-4), pp. 191-211.

Rao, R.V., Rai, D.P., Ramkumar, J., Balic, J. A new multi-objective Jaya algorithm for optimization of modern machining processes (2016) Advances in Production Engineering And Management, 11 (4), pp. 271-286.

Rao, R.V., More, K.C., Taler, J., Ocłoń, P. Optimal design of Stirling heat engine using an advanced optimization algorithm (2016) Sadhana - Academy Proceedings in Engineering Sciences, 41 (11), pp. 1321-1331.

Ocłoń, P., Bittelli, M., Cisek, P., Kroener, E., Pilarczyk, M., Taler, D., Rao, R.V., Vallati, A. The performance analysis of a new thermal backfill material for underground power cable system (2016) Applied Thermal Engineering, 108, pp. 233-250.

Rao, R.V., More, K.C., Taler, J., Ocłoń, P. Dimensional optimization of a micro-channel heat sink using Jaya algorithm (2016) Applied Thermal Engineering, 103, pp. 572-582.

Rao, R.V., Rai, D.P. Optimization of fused deposition modeling process using teaching-learning-based optimization algorithm (2016) Engineering Science and Technology, an International Journal, 19 (1), pp. 587-603.

Zhang, Y., Yang, X., Cattani, C., Rao, R.V., Wang, S., Phillips, P. Tea category identification using a novel fractional fourier entropy and Jaya algorithm (2016) Entropy, 18 (3), art. no. 77, .

Hultmann Ayala, H.V., Keller, P., De Fátima Morais, M., Mariani, V.C., Dos Santos Coelho, L., Venkata Rao, R. Design of heat exchangers using a novel multiobjective free search differential evolution paradigm (2016) Applied Thermal Engineering, 94, pp. 170-177.

Venkata Rao, R. Review of applications of tlbo algorithm and a tutorial for beginners to solve the unconstrained and constrained optimization problems (2016) Decision Science Letters, 5 (1), pp. 1-30.

Venkata Rao, R. Jaya: A simple and new optimization algorithm for solving constrained and unconstrained optimization problems (2016) International Journal of Industrial Engineering Computations, 7 (1), pp. 19-34.

Kamble, A.G., Venkata Rao, R. Effects of process parameters and thermo-mechanical simulation of gas metal arc welding process (2016) International Journal of Modelling and Simulation, 36 (4), pp. 170-182.

Rao, R.V., Rai, D.P., Balic, J. Surface grinding process optimization using Jaya algorithm (2016) Advances in Intelligent Systems and Computing, 411, pp. 487-495.

Lanjewar, P.B., Rao, R.V., Kale, A.V., Taler, J., Ocłoń, P. Evaluation and selection of energy technologies using an integrated graph theory and analytic hierarchy process methods (2016) Decision Science Letters, 5 (2), pp. 327-348.

Venkata Rao, R., Waghmare, G. Optimization of thermal performance of a smooth flat-plate solar air heater using teaching–learning-based optimization algorithm (2015) Cogent Engineering, 2 (1), art. no. 997421, .

Lanjewar, P.B., Rao, R.V., Kale, A.V. Assessment of alternative fuels for transportation using a hybrid graph theory and analytic hierarchy process method (2015) Fuel, 154, pp. 9-16.

Rao, R.V., Waghmare, G.G. Multi-objective design optimization of a plate-fin heat sink using a teaching-learning-based optimization algorithm (2015) Applied Thermal Engineering, 76, pp. 521-529.

Rao, R.V., More, K.C. Optimal design of the heat pipe using TLBO (teaching-learning-based optimization) algorithm (2015) Energy, 80, pp. 535-544.

Venkata Rao, R. Teaching learning based optimization algorithm: And its engineering applications (2015) Teaching Learning Based Optimization Algorithm: And its Engineering Applications, pp. 1-284.

Rao, R.V., Waghmare, G. Design optimization of robot grippers using teaching-learning-based optimization algorithm (2015) Advanced Robotics, 29 (6), pp. 431-447.

Rajesh, R., Ravi, V., Venkata Rao, R. Selection of risk mitigation strategy in electronic supply chains using grey theory and digraph-matrix approaches (2015) International Journal of Production Research, 53 (1), pp. 238-257.

Venkata Rao, R., Waghmare, G.G. A comparative study of a teaching-learning-based optimization algorithm on multi-objective unconstrained and constrained functions (2014) Journal of King Saud University - Computer and Information Sciences, 26 (3), pp. 332-346.

Rao, R.V., More, K.C. Advanced optimal tolerance design of machine elements using teaching-learning-based optimization algorithm (2014) Production and Manufacturing Research, 2 (1), pp. 71-94.

Keesari, H.S., Rao, R.V. Optimization of job shop scheduling problems using teaching-learning-based optimization algorithm (2014) OPSEARCH, 51 (4), pp. 545-561.

Rao, R.V., Kalyankar, V.D. Optimization of modern machining processes using advanced optimization techniques: A review (2014) International Journal of Advanced Manufacturing Technology, 73 (5-8), pp. 1159-1188.

Venkata Rao, R., Patel, V. A multi-objective improved teaching-learning based optimization algorithm for unconstrained and constrained optimization problems (2014) International Journal of Industrial Engineering Computations, 5 (1), pp. 1-22.

Lanjewar, P.B., Rao, R.V., Kale, A.V. A combined graph theory and analytic hierarchy process approach for multicriteria evaluation of hydrogen energy systems (2014) International Journal of Energy Technology and Policy, 10 (1), pp. 80-96.

Rao, R.V., Kalyankar, V.D., Waghmare, G. Parameters optimization of selected casting processes using teaching-learning-based optimization algorithm (2014) Applied Mathematical Modelling, 38 (23), pp. 5592-5608.

Rao, R.V., Kalyankar, V.D. Experimental investigation on submerged arc welding of Cr-Mo-V steel (2013) International Journal of Advanced Manufacturing Technology, 69 (1-4), pp. 93-106.

Rao, R.V., Patel, V. Multi-objective optimization of heat exchangers using a modified teaching-learning-based optimization algorithm (2013) Applied Mathematical Modelling, 37 (3), pp. 1147-1162.

Kamble, A.G., Rao, R.V. Experimental investigation on the effects of process parameters of GMAW and transient thermal analysis of AISI321 steel (2013) Advances in Manufacturing, 1 (4), pp. 362-377.

Rao, R.V., Patel, V. An improved teaching-learning-based optimization algorithm for solving unconstrained optimization problems (2013) Scientia Iranica, 20 (3), pp. 710-720.

Rao, R.V., Kalyankar, V.D. Multi-pass turning process parameter optimization using teaching-learning-based optimization algorithm (2013) Scientia Iranica, 20 (3), pp. 967-974.

Pawar, P.J., Rao, R.V. Parameter optimization of machining processes using teaching-learning-based optimization algorithm (2013) International Journal of Advanced Manufacturing Technology, 67 (5-8), pp. 995-1006.

Rao, R.V., Waghmare, G.G. Solving composite test functions using teaching-learning-based optimization algorithm (2013) Advances in Intelligent Systems and Computing, 199 AISC, pp. 395-403.

Rao, R.V., Patel, V. Comparative performance of an elitist teaching-learning-based optimization algorithm for solving unconstrained optimization problems (2013) International Journal of Industrial Engineering Computations, 4 (1), pp. 29-50.

Venkata Rao, R., Kalyankar, V.D. Parameter optimization of modern machining processes using teaching-learning-based optimization algorithm (2013) Engineering Applications of Artificial Intelligence, 26 (1), pp. 524-531.

Venkata Rao, R., Patel, V. Multi-objective optimization of two stage thermoelectric cooler using a modified teaching-learning-based optimization algorithm (2013) Engineering Applications of Artificial Intelligence, 26 (1), pp. 430-445.

Venkata Rao, R., Kalyankar, V.D. Parameters optimization of continuous casting process using teaching-learning-based optimization algorithm (2012) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7677 LNCS, pp. 540-547.

Rao, R.V., Patel, V. An elitist teaching-learning-based optimization algorithm for solving complex constrained optimization problems (2012) International Journal of Industrial Engineering Computations, 3 (4), pp. 535-560.

Rao, R.V., Patel, B.K. Decision making in the manufacturing environment using data envelopment analysis method (2012) Mechatronics and Intelligent Manufacturing, 1, pp. 181-198.

Pawar, P.J., Rao, R.V., Shankar, R. Multi-objective optimization of electro-chemical machining process parameters using an artificial bee colony (ABC) algorithm (2012) Mechatronics and Intelligent Manufacturing, 1, pp. 165-180.

Rao, R.V., Savsani, V.J., Balic, J. Teaching-learning-based optimization algorithm for unconstrained and constrained real-parameter optimization problems (2012) Engineering Optimization, 44 (12), pp. 1447-1462.

Rao, R.V., Singh, D., Bleicher, F., Dorn, C. Weighted Euclidean distance-based approach as a multiple attribute decision making method for manufacturing situations (2012) International Journal of Multicriteria Decision Making, 2 (3), pp. 225-240.

Mariani, V.C., Dos Santos Coelho, L., Duck, A., Guerra, F.A., Rao, R.V. Artificial immune network approach with beta differential operator applied to optimization of heat exchangers (2012) Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 7597 LNCS, pp. 166-177.

Venkata Rao, R., Kalyankar, V.D. Parameter optimization of machining processes using a new optimization algorithm (2012) Materials and Manufacturing Processes, 27 (9), pp. 978-985.

Mariani, V.C., Duck, A.R.K., Guerra, F.A., Coelho, L.D.S., Rao, R.V. A chaotic quantum-behaved particle swarm approach applied to optimization of heat exchangers (2012) Applied Thermal Engineering, 42, pp. 119-128.

Rao, R.V. A note on "selection of cutting parameters in side milling operation using graph theory and matrix approach" (2012) International Journal of Advanced Manufacturing Technology, 61 (9-12), pp. 855-858.

Venkata Rao, R., Patel, V. Multi-objective optimization of combined Brayton and inverse Brayton cycles using advanced optimization algorithms (2012) Engineering Optimization, 44 (8), pp. 965-983.

Rao, R.V., Kalyankar, V.D. Multi-objective multi-parameter optimization of the industrial LBW process using a new optimization algorithm (2012) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 226 (6), pp. 1018-1025.

Rao, R.V. A note on "an alternative multiple attribute decision making methodology for solving optimal facility layout design selection problems" (2012) International Journal of Industrial Engineering Computations, 3 (3), pp. 519-524.

Rao, R.V., Singh, D. Weighted Euclidean distance based approach as a multiple attribute decision making method for plant or facility layout design selection (2012) International Journal of Industrial Engineering Computations, 3 (3), pp. 365-382.

Rao, R.V., Savsani, V.J., Vakharia, D.P. Teaching-Learning-Based Optimization: An optimization method for continuous non-linear large scale problems (2012) Information Sciences, 183 (1), pp. 1-15.

Singh, D., Venkata Rao, R. A hybrid multiple attribute decision making method for solving problems of industrial environment (2011) International Journal of Industrial Engineering Computations, 2 (3), pp. 631-644.

Rao, R.V., Patel, V. Design optimization of rotary regenerator using artificial bee colony algorithm (2011) Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (8), pp. 1088-1098.

Rao, R.V., Patel, V. Design optimization of shell and tube heat exchangers using swarm optimization algorithms (2011) Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 225 (5), pp. 619-634.

Rao, R.V., Patel, B.K., Parnichkun, M. Industrial robot selection using a novel decision making method considering objective and subjective preferences (2011) Robotics and Autonomous Systems, 59 (6), pp. 367-375.

Venkata Rao, R., Patel, B.K. Novel method for decision making in the manufacturing environment (2011) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (3), pp. 422-434.

Rao, R.V., Savsani, V.J., Vakharia, D.P. Teaching-learning-based optimization: A novel method for constrained mechanical design optimization problems (2011) CAD Computer Aided Design, 43 (3), pp. 303-315.

Rao, R.V., Patel, B.K. Material selection using a novel multiple attribute decision making method (2011) International Journal of Manufacturing, Materials, and Mechanical Engineering, 1 (1), pp. 43-56.

Rao, R.V., Patel, V.K. Optimization of mechanical draft counter flow wet-cooling tower using artificial beecolony algorithm (2011) Energy Conversion and Management, 52 (7), pp. 2611-2622.

Darji, V.P., Rao, R.V. Simulated approach of fire risk analysis with fuzzy decision making methods-A new methodology (2010) ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 11, pp. 289-294.

Rao, R.V., Patel, B.K. A subjective and objective integrated multiple attribute decision making method for material selection (2010) Materials and Design, 31 (10), pp. 4738-4747.

Rao, R.V., Pawar, P.J., Davim, J.P. Optimisation of process parameters of mechanical type advanced machining processes using a simulated annealing algorithm (2010) International Journal of Materials and Product Technology, 37 (1-2), pp. 83-101.

Rao, R.V., Pawar, P.J., Davim, J.P. Parameter optimization of ultrasonic machining process using nontraditional optimization algorithms (2010) Materials and Manufacturing Processes, 25 (10), pp. 1120-1130.

Rao, R.V., Patel, V.K. Thermodynamic optimization of cross flow plate-fin heat exchanger using a particle swarm optimization algorithm (2010) International Journal of Thermal Sciences, 49 (9), pp. 1712-1721.

Rao, R.V., Padmanabhan, K.K. Selection of best product end-of-life scenario using digraph and matrix methods (2010) Journal of Engineering Design, 21 (4), pp. 455-472.

Patel, V.K., Rao, R.V. Design optimization of shell-and-tube heat exchanger using particle swarm optimization technique (2010) Applied Thermal Engineering, 30 (11-12), pp. 1417-1425.

Rao, R.V., Pawar, P.J. Grinding process parameter optimization using non-traditional optimization algorithms (2010) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (6), pp. 887-898.

Pawar, P.J., Rao, R.V., Davim, J.P. Multiobjective optimization of grinding process parameters using particle swarm optimization algorithm (2010) Materials and Manufacturing Processes, 25 (6), pp. 424-431.

Venkata Rao, R., Pawar, P.J. Parameter optimization of a multi-pass milling process using non-traditional optimization algorithms (2010) Applied Soft Computing Journal, 10 (2), pp. 445-456.

Savsani, V., Rao, R.V., Vakharia, D.P. Optimal weight design of a gear train using particle swarm optimization and simulated annealing algorithms (2010) Mechanism and Machine Theory, 45 (3), pp. 531-541.

Rao, R.V., Patel, B.K. Decision making in the manufacturing environment using an improved PROMETHEE method (2010) International Journal of Production Research, 48 (16), pp. 4665-4682.

Rao, R.V., Pawar, P.J. Modelling and optimization of process parameters of wire electrical discharge machining (2009) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (11), pp. 1431-1440.

Rao, R.V. Flexible Manufacturing System selection using an improved compromise ranking method (2009) International Journal of Industrial and Systems Engineering, 4 (2), pp. 198-215.

Rao, R.V., Parnichkun, M. Flexible manufacturing system selection using a combinatorial mathematics-based decision-making method (2009) International Journal of Production Research, 47 (24), pp. 6981-6998.

Venkata Rao, R. An improved compromise ranking method for evaluation of environmentally conscious manufacturing programs (2009) International Journal of Production Research, 47 (16), pp. 4399-4412.

Rao, R.V. A decision making methodology for material selection using an improved compromise ranking method (2008) Materials and Design, 29 (10), pp. 1949-1954.

Rao, R.V., Pawar, P.J., Shankar, R. Multi-objective optimization of electrochemical machining process parameters using a particle swarm optimization algorithm (2008) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222 (8), pp. 949-958.

Rao, R.V. Evaluation of environmentally conscious manufacturing programs using multiple attribute decision-making methods (2008) Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222 (3), pp. 441-451.

Rao, R.V. Evaluating flexible manufacturing systems using a combined multiple attribute decision making method (2008) International Journal of Production Research, 46 (7), pp. 1975-1989.

Rao, R.V. Environmental impact assessment of manufacturing processes using a combinatorial mathematics based decision making method (2008) International Journal of Sustainable Engineering, 1 (1), pp. 42-50.

Rao, R.V., Davim, J.P. A decision-making framework model for material selection using a combined multiple attribute decision-making method (2008) International Journal of Advanced Manufacturing Technology, 35 (7-8), pp. 751-760.

Rao, R.V., Padmanabhan, K.K. Rapid prototyping process selection using graph theory and matrix approach (2007) Journal of Materials Processing Technology, 194 (1-3), pp. 81-88.

Venkata Rao, R. Vendor selection in a supply chain using analytic hierarchy process and genetic algorithm methods (2007) International Journal of Services and Operations Management, 3 (3), pp. 355-369.

Rao, R.V. A decision-making framework model for evaluating flexible manufacturing systems using digraph and matrix methods (2006) International Journal of Advanced Manufacturing Technology, 30 (11-12), pp. 1101-1110.

Rao, R.V. A material selection model using graph theory and matrix approach (2006) Materials Science and Engineering A, 431 (1-2), pp. 248-255.

Rao, R.V., Padmanabhan, K.K. Selection, identification and comparison of industrial robots using digraph and matrix methods (2006) Robotics and Computer-Integrated Manufacturing, 22 (4), pp. 373-383.

Rao, R.V. Plant location selection using fuzzy digraph and matrix methods (2006) International Journal of Industrial Engineering : Theory Applications and Practice, 13 (2), pp. 166-176.

Rao, R.V. Machinability evaluation of work materials using a combined multiple attribute decision-making method (2006) International Journal of Advanced Manufacturing Technology, 28 (3-4), pp. 221-227.

Rao, R.V. Machine group selection in a flexible manufacturing cell using digraph and matrix methods (2006) International Journal of Industrial and Systems Engineering, 1 (4), pp. 502-518.

Karuppusami, G., Gandhinathan, R., Rao, R.V. A quality function deployment approach to internal benchmarking of critical success factors of strategic quality management (2006) International Journal of Services and Operations Management, 2 (2), pp. 178-201.

Rao, R.V. Machine selection in a flexible manufacturing cell using a combined multiple attribute decision making method (2005) Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, 85 (MAR.), pp. 75-79.

Venkata Rao, R. Evaluation of metal stamping layouts using an analytic hierarchy process method (2004) Journal of Materials Processing Technology, 152 (1), pp. 71-76.

Rao, R.V. Evaluation of metal stamping layouts using a combined multiple attribute decision making method (2004) Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, 84 (MAR.), pp. 65-70.

Venkata Rao, R., Gandhi, O.P. Failure cause analysis of machine tools using digraph and matrix methods (2002) International Journal of Machine Tools and Manufacture, 42 (4), pp. 521-528.

Venkata Rao, R., Gandhi, O.P. Digraph and matrix methods for the machinability evaluation of work materials (2002) International Journal of Machine Tools and Manufacture, 42 (3), pp. 321-330.

Rao, R.V., Gandhi, O.P. Digraph and matrix method for the estimation of machinability index of work materials (2001) Journal of the Institution of Engineers (India), Part PR: Production Engineering Division, 81 (2), pp. 52-55.

Rao, R.V., Gandhi, O.P. Digraph and matrix method for the selection, identification and comparison of metal-cutting fluids (2001) Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 215 (1), pp. 25-33.

Venkata Rao, R., Gandhi, O.P., Sharma, J.K. Selection of Cutting Fluid Through Graph Theory and Matrix Approach