Shabani, M. O., & Heydari, F. (2018). Influence of solutionising temperature and time on spherodisation of the silicon particles of AMNCs. International Journal of Materials and Product Technology, 57(4), 336-349.

Shamsipour, M., Pahlevani, Z., Shabani, M.O., Mazahery, A. Squeeze casting of electromagnetically stirred aluminum matrix nanocomposites in semi-solid condition using hybrid algorithm optimized parameters (2017) Kovove Materialy, 55 (1), pp. 33-43.

Shabani, M.O., Heydari, F., Tofigh, A.A., Rahimipour, M.R., Razavi, M., Mazahery, A., Davami, P. Wear wear properties of rheo-squeeze cast aluminum matrix reinforced with nano particulates (2016) Protection of Metals and Physical Chemistry of Surfaces, 52 (3), pp. 486-491.

Shamsipour, M., Pahlevani, Z., Shabani, M.O., Mazahery, A. Optimization of the EMS process parameters in compocasting of high-wear-resistant Al-nano-TiC composites (2016) Applied Physics A: Materials Science and Processing, 122 (4), art. no. 457, .

Shabani, M.O., Tofigh, A.A., Heydari, F., Mazahery, A. Superior Tribological Properties of Particulate Aluminum Matrix Nano Composites (2016) Protection of Metals and Physical Chemistry of Surfaces, 52 (2), pp. 244-248.

Shabani, M.O., Rahimipour, M.R., Tofigh, A.A., Davami, P. Refined microstructure of compo cast nanocomposites: the performance of combined neuro-computing, fuzzy logic and particle swarm techniques (2015) Neural Computing and Applications, 26 (4), pp. 899-909.

Tofigh, A.A., Rahimipour, M.R., Shabani, M.O., Davami, P. Application of the combined neuro-computing, fuzzy logic and swarm intelligence for optimization of compocast nanocomposites (2015) Journal of Composite Materials, 49 (13), pp. 1653-1663.

Baghani, A., Bahmani, A., Davami, P., Varahram, N., Shabani, M.O. Application of computational fluid dynamics to study the effects of Sprue base geometry on the surface and internal turbulence in gravity casting (2015) Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 229 (2), pp. 106-116.

Mazahery, A., Shabani, M.O. Experimental Investigation on the Aging Response, Hardness and Total Impact Energy Absorption of Sr-Modified Heat-Treatable Cast Automotive Aluminum Alloys (2014) Transactions of the Indian Institute of Metals, 67 (5), pp. 753-759.

Mazahery, A., Shabani, M.O. Extruded AA6061 alloy matrix composites: The performance of multi-strategies to extend the searching area of the optimization algorithm (2014) Journal of Composite Materials, 48 (16), pp. 1927-1937.

Mazahery, A., Shabani, M.O. Modification mechanism and microstructural characteristics of eutectic si in casting Al-Si Alloys: A review on experimental and numerical studies (2014) JOM, 66 (5), pp. 726-738.

Shabani, M.O., Mazahery, A. Automotive copper and magnesium containing cast aluminium alloys: Report on the correlation between Yttrium modified microstructure and mechanical properties (2014) Russian Journal of Non-Ferrous Metals, 55 (5), pp. 436-442.

Mazahery, A., Shabani, M.O. The performance of pressure assisted casting process to improve the mechanical properties of Al-Si-Mg alloys matrix reinforced with coated B4C particles (2014) International Journal of Advanced Manufacturing Technology, 76 (1-4), pp. 263-270.

Mazahery, A., Shabani, M.O. The effect of primary and secondary processing on the abrasive wear properties of compocast aluminum 6061 alloy matrix composites (2014) Protection of Metals and Physical Chemistry of Surfaces, 50 (6), pp. 817-824.

Rahimipour, M.R., Tofigh, A.A., Mazahery, A., Shabani, M.O. Strategic developments to improve the optimization performance with efficient optimum solution and produce high wear resistance aluminum-copper alloy matrix composites (2014) Neural Computing and Applications, 24 (7-8), pp. 1531-1538.

Rahimipour, M.R., Tofigh, A.A., Shabani, M.O., Davami, P. The enhancement of wear properties of compo-cast A356 composites reinforced with Al2O3 nano particulates (2014) Tribology in Industry, 36 (2), pp. 220-227.

Baghani, A., Davami, P., Varahram, N., Shabani, M.O. Investigation on the effect of mold constraints and cooling rate on residual stress during the sand-casting process of 1086 steel by employing a thermomechanical model (2014) Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 45 (3), pp. 1157-1169.

Mazahery, A., Shabani, M.O., Elrefaei, A. Searching for the superior solution to the population-based optimization problem: Processing of the wear resistant commercial AA6061 AMCs (2014) International Journal of Damage Mechanics, 23 (7), pp. 899-916.

Heydari, F., Maghsoudipour, A., Shabani, M.O., Hamnabard, Z., Farhangdoust, S. The effect of zirconia nanoparticles addition on thermal and electrical properties of BaO-CaO-Al2O3-B2O3-SiO2 glass for solid oxide fuel cell sealant (2014) Journal of Ceramic Processing Research, 15 (1), pp. 35-43.

Faraji, A.H., Bahmani, A., Goodarzi, M., Seyedein, S.H., Shabani, M.O. Numerical and experimental investigations of weld pool geometry in GTA welding of pure aluminum (2014) Journal of Central South University, 21 (1), pp. 20-26.

Bahmani, A., Eisaabadi, G.B., Davami, P., Varahram, N., Shabani, M.O. Effects of hydrogen level and cooling rate on ultimate tensile strength of Al A319 alloy (2014) Russian Journal of Non-Ferrous Metals, 55 (4), pp. 365-370.

Shabani, M.O., Tofigh, A.A., Rahimipour, M.R., Razavi, M., Mazahery, A., Heydari, F. Optimization of the mechanical and tribological properties of extruded AMCs: Extension of the algorithm searching area via multi-strategies (2014) Materiali in Tehnologije, 48 (4), pp. 459-466.

Mazahery, A., Shabani, M.O. The performance of TV-MOPSO in optimization of sintered steels (2013) Kovove Materialy, 51 (6), pp. 333-341.

Mazahery, A., Shabani, M.O. Elaboration of an operative and efficacious optimization route to ameliorate the mechanical and tribological properties of implants (2013) Powder Technology, 249, pp. 530-535.

Shabani, M.O., Mazahery, A. Computational modeling of cast aluminum 2024 alloy matrix composites: Adapting the classical algorithms for optimal results in finding multiple optima (2013) Powder Technology, 249, pp. 77-81.

Tofigh, A.A., Rahimipour, M.R., Shabani, M.O., Alizadeh, M., Heydari, F., Mazahery, A., Razavi, M. Optimized processing power and trainability of neural network in numerical modeling of Al Matrix nano composites (2013) Journal of Manufacturing Processes, 15 (4), pp. 518-523.

Baghani, A., Bahmani, A., Davami, P., Varahram, N., Shabani, M.O. Numerical investigation of the effect of sprue base design on the flow pattern of aluminum gravity casting (2013) Defect and Diffusion Forum, 344, pp. 43-53.

Tofigh, A.A., Shabani, M.O. Efficient optimum solution for high strength Al alloys matrix composites (2013) Ceramics International, 39 (7), pp. 7483-7490.

Mazahery, A., Shabani, M.O. Development of the principle of simulated natural evolution in searching for a more superior solution: Proper selection of processing parameters in AMCs (2013) Powder Technology, 245, pp. 146-155.

Rahimipour, M.R., Tofigh, A.A., Mazahery, A., Shabani, M.O. Enhancement of abrasive wear resistance in consolidated Al matrix composites via extrusion process (2013) Tribology - Materials, Surfaces and Interfaces, 7 (3), pp. 129-134.

Ostad Shabani, M., Mazahery, A. Fabrication of AMCs by spray forming: Setting of cognition and social parameters to accelerate the convergence in optimization of spray forming process (2013) Ceramics International, 39 (5), pp. 5271-5279.

Mazahery, A., Shabani, M.O. Microstructural and abrasive wear properties of SiC reinforced aluminum-based composite produced by compocasting (2013) Transactions of Nonferrous Metals Society of China (English Edition), 23 (7), pp. 1905-1914.

Mazahery, A., Shabani, M.O. Existence of good bonding between coated B4C reinforcement and al matrix via semisolid techniques: Enhancement of wear resistance and mechanical properties (2013) Tribology Transactions, 56 (3), pp. 342-348.

Yousefi, R., Shabani, M., Arjmandi, M., Ghoreishi, S.S. A computational study on electrical characteristics of a novel band-to-band tunneling graphene nanoribbon FET (2013) Superlattices and Microstructures, 60, pp. 169-178.

Tofigh, A.A., Shabani, M.O. Applying various training algorithms in data analysis of nano composites (2013) Acta Metallurgica Slovaca, 19 (2), pp. 94-104.

Mazahery, A., Shabani, M.O. Plastic deformation on worn surface of sintered diffusion alloyed Fe-Ni-Cu steel powders (2013) Materials Technology, 28 (3), pp. 117-121.

Mazahery, A., Shabani, M.O. Application of the Extrusion to Increase the Binding between the Ceramic Particles and the Metal Matrix: Enhancement of Mechanical and Tribological Properties (2013) Journal of Materials Science and Technology, 29 (5), pp. 423-428.

Mazahery, A., Shabani, M.O. Investigating the effect of reinforcing particulates on the weight loss and worn surface of compocast AMCs (2013) Kovove Materialy, 51 (1), pp. 11-18.

Mazahery, A., Shabani, M.O. Ascending order of enhancement in sliding wear behavior and tensile strength of the compocast aluminum matrix composites (2013) Transactions of the Indian Institute of Metals, 66 (2), pp. 171-176.

Almeida, F.A., Maru, M.M., Shabani, M., Oliveira, F.J., Silva, R.F., Achete, C.A. Enhancing the tribological performance under biodiesel lubrication using CVD diamond coated parts (2013) Wear, 302 (1-2), pp. 1370-1377.

Shabani, M.O., Mazahery, A. Good bonding between coated B4C particles and aluminum matrix fabricated by semisolid techniques (2013) Russian Journal of Non-Ferrous Metals, 54 (2), pp. 154-160.

Shabani, M.O., Mazahery, A. The synthesis of the particulates Al matrix composites by the compocasting method (2013) Ceramics International, 39 (2), pp. 1351-1358.

Shabani, M.O., Mazahery, A. Application of GA to optimize the process conditions of Al Matrix nano-composites (2013) Composites Part B: Engineering, 45 (1), pp. 185-191.

Shabani, M.O., Mazahery, A. Suppression of segregation, settling and agglomeration in mechanically processed composites fabricated by a semisolid agitation processes (2013) Transactions of the Indian Institute of Metals, 66 (1), pp. 65-70.

Bahmani, A., Hatami, N., Varahram, N., Davami, P., Shabani, M.O. A mathematical model for prediction of microporosity in aluminum alloy A356 (2013) International Journal of Advanced Manufacturing Technology, 64 (9-12), pp. 1313-1321.

Razavi, M., Ghaderi, R., Rahimipour, M.R., Shabani, M.O. Effect of addition of TiC master alloy on the properties of CK45 (2013) Materials and Manufacturing Processes, 28 (1), pp. 31-35.

Mazahery, A., Shabani, M.O. Plasticity and microstructure of A356 matrix nano composites (2013) Journal of King Saud University - Engineering Sciences, 25 (1), pp. 41-48.

Shabani, M.O., Mazahery, A. Optimization of Al matrix reinforced with B4C particles (2013) JOM, 65 (2), pp. 272-277.

Mazahery, A., Shabani, M.O., Alizadeh, M., Tofigh, A.A. Concurrent fitness evaluations in searching for the optimal process conditions of Al matrix nanocomposites by linearly decreasing weight (2013) Journal of Composite Materials, 47 (14), pp. 1765-1772.

Shabani, M.O., Mazahery, A. A novel computational strategy to enhance the ability of elaborate search by entire swarm to find the best solution in optimization of AMCs (2012) Defect and Diffusion Forum, 332, pp. 27-33.

Mazahery, A., Shabani, M.O. Assistance of novel artificial intelligence in optimization of aluminum matrix nanocomposite by genetic algorithm (2012) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (13), pp. 5279-5285.

Razavi, M., Ghaderi, R., Rahimipour, M.R., Shabni, M.O. Synthesis of TiC master alloy in nanometer scale by mechanical milling (2012) Materials and Manufacturing Processes, 27 (12), pp. 1310-1314.

Shabani, M.O., Mazahery, A. Development of an extrusion process to ameliorate the tribological properties of heat treated Al Mg Si (Cu) system alloys matrix composites in consolidated state (2012) Tribology in Industry, 34 (3), pp. 166-173.

Shabani, M.O., Mazahery, A. Artificial Intelligence in numerical modeling of nano sized ceramic particulates reinforced metal matrix composites (2012) Applied Mathematical Modelling, 36 (11), pp. 5455-5465.

Mazahery, A., Shabani, M.O. Mechanical properties of A356 matrix composites reinforced with nano-SiC particles (2012) Strength of Materials, 44 (6), pp. 686-692.

Mazahery, A., Shabani, M.O., Rahimipour, M.R., Razavi, M. The numerical modeling of abrasion resistance in casting aluminum-silicon alloy matrix composites (2012) Journal of Composite Materials, 46 (21), pp. 2647-2658.

Shabani, M.O., Mazahery, A. Application of a linearly decreasing weight particle swarm to optimize the process conditions of Al matrix nanocomposites (2012) Metallurgist, 56 (5-6), pp. 414-422.

Shabani, M.O., Mazahery, A., Alizadeh, M., Tofigh, A.A., Rahimipour, M.R., Razavi, M., Kolahi, A. Computational fluid dynamics (CFD) simulation of effect of baffles on separation in mixer settler (2012) International Journal of Mining Science and Technology, 22 (5), pp. 703-706.

Shabani, M.O., Mazahery, A. Optimization of process conditions in casting aluminum matrix composites via interconnection of artificial neurons and progressive solutions (2012) Ceramics International, 38 (6), pp. 4541-4547.

Mazahery, A., Alizadeh, M., Shabani, M.O. Study of tribological and mechanical properties of A356-nano SiC composites (2012) Transactions of the Indian Institute of Metals, 65 (4), pp. 393-398.

Mazahery, A., Shabani, M.O. The enhancement of wear properties of squeeze-cast A356 composites reinforced with B 4C particulates (2012) International Journal of Materials Research, 103 (7), pp. 847-852.

Mazahery, A., Shabani, M.O., Rahimipour, M.R., Tofigh, A.A., Razavi, M. Effect of coated B 4C reinforcement on mechanical properties of squeeze cast A356 composites (2012) Kovove Materialy, 50 (2), pp. 107-113.

Mazahery, A., Shabani, M.O. Study on microstructure and abrasive wear behavior of sintered Al matrix composites (2012) Ceramics International, 38 (5), pp. 4263-4269.

Mazahery, A., Shabani, M.O. Process conditions optimization in Al-Cu alloy matrix composites (2012) Powder Technology, 225, pp. 101-106.

Shabani, M.O., Mazahery, A., Rahimipour, M.R., Razavi, M. FEM and ANN investigation of A356 composites reinforced with B4C particulates (2012) Journal of King Saud University - Engineering Sciences, 24 (2), pp. 107-113.

Shabani, M.O., Mazahery, A. Application of finite element model and artificial neural network in characterization of al matrix nanocomposites using various training algorithms (2012) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (6), pp. 2158-2165.

Mazahery, A., Shabani, M.O., Salahi, E., Rahimipour, M.R., Tofigh, A.A., Razavi, M. Hardness and tensile strength study on Al356-B 4C composites (2012) Materials Science and Technology, 28 (5), pp. 634-638.

Mazahery, A., Alizadeh, M., Shabani, M.O. Wear of Al-Si alloys matrix reinforced with sol-gel coated particles (2012) Materials Technology, 27 (2), pp. 180-185.

Shabani, M.O., Mazahery, A., Rahimipour, M.R., Tofigh, A.A., Razavi, M. The most accurate ANN learning algorithm for FEM prediction of mechanical performance of alloy A356 (2012) Kovove Materialy, 50 (1), pp. 25-31.

Shabani, M.O., Mazahery, A. Prediction performance of various numerical model training algorithms in solidification process of A356 matrix composites (2012) Indian Journal of Engineering and Materials Sciences, 19 (2), pp. 129-134.

Mazahery, A., Shabani, M.O. A comparative study on abrasive wear behavior of semisolid-liquid processed Al-Si matrix reinforced with coated B 4C reinforcement (2012) Transactions of the Indian Institute of Metals, 65 (2), pp. 145-154.

Mazahery, A., Shabani, M.O. Tribological behaviour of semisolid-semisolid compocast Al-Si matrix composites reinforced with TiB 2 coated B 4C particulates (2012) Ceramics International, 38 (3), pp. 1887-1895.

Mazahery, A., Shabani, M.O. Sol-gel coated B4C particles reinforced 2024 Al matrix composites (2012) Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 226 (2), pp. 159-169.

Mazahery, A., Shabani, M.O. Influence of the hard coated B 4C particulates on wear resistance of Al-Cu alloys (2012) Composites Part B: Engineering, 43 (3), pp. 1302-1308.

Shabani, M.O., Mazahery, A. The performance of various artificial neurons interconnections in the modelling and experimental manufacturing of the composites (2012) Materiali in Tehnologije, 46 (2), pp. 109-113.

Mazahery, A., Shabani, M. Characterization of wear mechanisms in sintered Fe-1.5 Wt % Cu alloys (2012) Archives of Metallurgy and Materials, 57 (1), pp. 93-103.

Shabani, M., Mazahery, A. Computational fluid dynamics (CFD) simulation of liquid-liquid mixing in mixer settler (2012) Archives of Metallurgy and Materials, 57 (1), pp. 173-178.

Mazahery, A., Shabani, M.O. Characterization of cast A356 alloy reinforced with nano SiC composites (2012) Transactions of Nonferrous Metals Society of China (English Edition), 22 (2), pp. 275-280.

Mazahery, A., Shabani, M.O. A356 reinforced with nanoparticles: Numerical analysis of mechanical properties (2012) JOM, 64 (2), pp. 323-329.

Mazahery, A., Shabani, M.O. Nano-sized silicon carbide reinforced commercial casting aluminum alloy matrix: Experimental and novel modeling evaluation (2012) Powder Technology, 217, pp. 558-565.

Mazahery, A., Shabani, M.O. Mechanical properties of squeeze-cast A356 composites reinforced with B 4C particulates (2012) Journal of Materials Engineering and Performance, 21 (2), pp. 247-252.

Shabani, M.O., Mazahery, A. The GA optimization performance in the microstructure and mechanical properties of MMNCs (2012) Transactions of the Indian Institute of Metals, 65 (1), pp. 77-83.

Shabani, M.O., Mazahery, A. Searching for a novel optimization strategy in tensile and fatigue properties of alumina particulates reinforced aluminum matrix composite (2012) Engineering with Computers, 30 (4), pp. 559-568.

Shabani, M.O., Mazahery, A., Davami, P., Razavi, M. Silicon morphology modelling during solidification process of A356 al alloy (2012) International Journal of Cast Metals Research, 25 (1), pp. 53-58.

Shabani, M.O., Mazahery, A. Evaluation of the effect of mixer settler baffles on liquid-liquid extraction via CFD simulation (2011) UPB Scientific Bulletin, Series D: Mechanical Engineering, 73 (4), pp. 55-64.

Shabani, M.O., Mazahery, A. The ANN application in FEM modeling of mechanical properties of Al-Si alloy (2011) Applied Mathematical Modelling, 35 (12), pp. 5707-5713.

Shabani, M.O., Alizadeh, M., Mazahery, A. Modelling of mechanical properties of cast A356 alloy (2011) Fatigue and Fracture of Engineering Materials and Structures, 34 (12), pp. 1035-1040.

Shabani, M.O., Mazahery, A., Bahmani, A., Davami, P., Varahram, N. Solidification of A356 Al alloy: Experimental study and modeling (2011) Kovove Materialy, 49 (4), pp. 253-258.

Shabani, M.O., Mazahery, A. Prediction of mechanical properties of cast A356 alloy as a function of microstructure and cooling rate (2011) Archives of Metallurgy and Materials, 56 (3), pp. 671-675.

Mazahery, A., Ostadshabani, M. Investigation on mechanical properties of nano-Al 2O 3-reinforced aluminum matrix composites (2011) Journal of Composite Materials, 45 (24), pp. 2579-2586.

Shabani, M.O., Mazahery, A. Modeling of the wear behavior in A356-B4C composites (2011) Journal of Materials Science, 46 (20), pp. 6700-6708.

Shabani, M.O., Alizadeh, M., Mazahery, A. Fluid flow characterization of liquid-liquid mixing in mixer-settler (2011) Engineering with Computers, 27 (4), pp. 373-379.

Shabani, M.O., Mazahery, A. Microstructural prediction of cast A356 alloy as a function of cooling rate (2011) JOM, 63 (8), pp. 132-136.

Mazahery, A., Shabani, M.O. The accuracy of various training algorithms in tribological behavior modeling of A356-B 4C composites (2011) Russian Metallurgy (Metally), 2011 (7), pp. 699-707.

Shabani, M.O., Mazahery, A. Prediction of wear properties in A356 matrix composite reinforced with B4C particulates (2011) Synthetic Metals, 161 (13-14), pp. 1226-1231.

Razavi, M., Rajabi-Zamani, A.H., Rahimipour, M.R., Kaboli, R., Shabani, M.O., Yazdani-Rad, R. Synthesis of Fe-TiC-Al2O3 hybrid nanocomposite via carbothermal reduction enhanced by mechanical activation (2011) Ceramics International, 37 (2), pp. 443-449.

Shahroosvand, H., Khorasani-Motlagh, M., Noroozifar, M., Shabani, M., Fyezbakhsh, A., Abdouss, M. Synthesis and characterisation of TiO2 nanoparticle with polypyridily complexes for using in solar cells (2010) International Journal of Nanomanufacturing, 5 (3-4), pp. 352-365.

Azizinejad, F., Talu, M., Abdouss, M., Shabani, M. An investigation of the grafting of acrylic acid/methyl methacrylate mixture onto poly(ethylene terephthalate) fibres (2005) Iranian Polymer Journal (English Edition), 14 (1), pp. 33-38.

Abdouss, M., Sanjani, N.S., Azizinejad, F., Shabani, M. Effects of compatibilization of oxidized polypropylene on PP blends of PP/PA6 and PP/Talc (2004) Journal of Applied Polymer Science, 92 (5), pp. 2871-2883.

Shabani, M., Monajjemi, M., Aghai, H. Solvent effects on the internal rotation barrier around the C-N bond and 14N NMR shielding of 2-amino-3-mercapto propionamide: Continuous set of gauge transformation calculations using a polarisable continuum model (2003) Journal of Chemical Research - Part S, (5), pp. 249-251.