In this paper, economic analysis on the effect of polyester fibers with high strength on the behavior of Hot Mix Asphalt (HMA) is performed. The results indicate that strength is increased by adding fiber to asphalt. Also, unit weight of asphalt mixture was used as a variable parameter in the analyses. The results show that in some certain percentages of fiber, in addition to the enhancement in mechanical properties of HMA mixture the economic benefit value becomes more than the cost and therefore adding polyester fibers with high stability is suggested for the mixture of modified asphalt concrete. Finally, it can be concluded that adding fibers in values of 0.2% to 0.5% has the best result on the asphalt mixture, which because of high resistance and economic aspects makes it more efficient to be used in the highways of warm regions containing traffic.

The main objective of this paper is to study the effects of haversinse and triangular loading waveforms on the fatigue life of Hot Mix Asphalt (HMA) specimens. Effects of load duration, rest period and stress level are also studied for the asphalt mixtures at 25oC. An indirect tensile test with strain control was performed to determine the fatigue life of asphalt. The fatigue tests were performed at two stress levels (170 and 250 kPa), two waveforms (haversine and triangle), three load duration (100, 200, 400 ms), and two rest period to load duration ratios (4 and 9). The obtained results showed that fatigue life of haversine waveform is less than fatigue life of triangle waveform. As the area under the loading curve is increased (stress level is increased or deformed), effect of rest period on the fatigue life decreases. On the other hand, as the tire contact area is increased, the induced tire pressure reduction decreases its destructive effects on the asphalt layer. As the load duration is decreased, fatigue life will increase. This effect is more pronounced for lower stress levels than the higher stress levels.