Ayyanar, N. (2015). Comparative study and performance analysis of automotive braking system. Comparative study and performance analysis of automotive braking system”“International Journal of MC Square Scientific Research, 7(1).
Barbieri, L., & Muzzupappa, M. (2022). Performance-driven engineering design approaches based on generative design and topology optimization tools: a comparative study. Applied Sciences, 12(4), 2106.
Budynas, R. G., & Nisbett, J. K. (2011). Shigley's mechanical engineering design (Vol. 9, pp. 409-473). New York: McGraw-Hill.
Bulsara, A., Lakhani, D., Agarwal, Y., & Agiwal, Y. (2017). Design and testing of an adjustable braking system for an FSAE vehicle. Int J Res Eng Technol, 6(10), 25-29.
Caliskan, U., & Patoglu, V. (2020). Efficacy of haptic pedal feel compensation on driving with regenerative braking. IEEE Transactions on Haptics, 13(1), 175-182.
Chakraborty, A. (2019). Performance gains of load sensing brake force distribution in motorcycles (No. 2019-28-2426). SAE Technical Paper.
Chen, S., Zhang, X., & Wang, J. (2020). Sliding Mode Control of Vehicle Equipped with Brake‐by‐Wire System consid-ering Braking Comfort. Shock and Vibration, 2020(1), 5602917.
Chen, W., Jia, D., & Huang, S. (2022). Optimized Design of Braking System in FSAE Racers. J. Eng. Mech. Mach, 7, 62-74.
Dabhade, A., Naik, M., Nakhate, V., & More, A. (2020). Research on Brake Pedal and Mounting to Adjust Different Pa-rameters for Maruti Tandem Master Cylinder. International Research Journal of Engineering and Technology (IR-JET), 7(10).
Dhauni, S., Sharma, V., & Chawla, V. K. (2020, October). Design and Analysis of Drivetrain Assembly for FSAE Vehi-cle. In International Conference on Energy, Materials Sciences & Mechanical Engineering (pp. 571-585). Singapore: Springer Nature Singapore.
Droździel, P., Tarkowski, S., Rybicka, I., & Wrona, R. (2020). Drivers’ reaction time research in the conditions in the real traffic. Open Engineering, 10(1), 35-47.
Duff, R., Ingegneri, M. A., Measmer, M. J., & de Vasconcellos, M. P. (2020). Design and Optimization of an FSAE Ve-hicle (Doctoral dissertation, Worcester Polytechnic Institute).
Duzgun, E., Acar, E., & Yildiz, A. R. (2024). A novel chaotic artificial rabbits algorithm for optimization of constrained engineering problems. Materials testing, 66(9), 1449-1462.
Ebrahimi-Nejad, S., & Kheybari, M. (2017). Brake system design for sports cars using digital logic method. Interna-tional Journal of Automotive Engineering, 7(4), 2570-2582.
Fadhloun, K., & Rakha, H. (2020). A novel vehicle dynamics and human behavior car-following model: Model devel-opment and preliminary testing. International journal of transportation science and technology, 9(1), 14-28.
Feng, F., Bao, S., Sayer, J. R., Flannagan, C., Manser, M., & Wunderlich, R. (2017). Can vehicle longitudinal jerk be used to identify aggressive drivers? An examination using naturalistic driving data. Accident Analysis & Prevention, 104, 125-136.
Fugiglando, U., Massaro, E., Santi, P., Milardo, S., Abida, K., Stahlmann, R., ... & Ratti, C. (2018). Driving behavior analysis through CAN bus data in an uncontrolled environment. IEEE Transactions on Intelligent Transportation Systems, 20(2), 737-748.
Gao, K., Luo, P., Xie, J., Chen, B., Wu, Y., & Du, R. (2023). Energy management of plug-in hybrid electric vehicles based on speed prediction fused driving intention and LIDAR. Energy, 284, 128535.
Ghandriz, T., Jacobson, B., Murgovski, N., Nilsson, P., & Laine, L. (2021). Real-time predictive energy management of hybrid electric heavy vehicles by sequential programming. IEEE Transactions on Vehicular Technology, 70(5), 4113-4128.
Gillespie, T. (Ed.). (2021). Fundamentals of vehicle dynamics. SAE International.
Graci, V., Douglas, E., Seacrist, T., Kerrigan, J., Mansfield, J., Bolte, J., ... & Arbogast, K. B. (2019). Effect of automat-ed versus manual emergency braking on rear seat adult and pediatric occupant precrash motion. Traffic injury pre-vention, 20(sup1), S106-S111
Godfrey, A. J., & Sankaranarayanan, V. (2018). A new electric braking system with energy regeneration for a BLDC motor driven electric vehicle. Engineering science and technology, an international journal, 21(4), 704-713.
Gupta, D., Mahajan, P., & Chawla, V. K. (2020, October). Design and Analysis of Pedal Assembly for an FSAE Vehicle. In International Conference on Energy, Materials Sciences & Mechanical Engineering (pp. 557-570). Singapore: Springer Nature Singapore.
He, H., Wang, C., Jia, H., & Cui, X. (2020). An intelligent braking system composed single-pedal and multi-objective optimization neural network braking control strategies for electric vehicle. Applied Energy, 259, 114172.
Heisler, H. (2002). Advanced vehicle technology. Elsevier.
Hernández, L. G., Mozos, O. M., Ferrández, J. M., & Antelis, J. M. (2018). EEG-based detection of braking intention under different car driving conditions. Frontiers in neuroinformatics, 12, 29.
Hou, L., Duan, J., Wang, W., Li, R., Li, G., & Cheng, B. (2019). Drivers’ braking behaviors in different motion patterns of vehicle-bicycle conflicts. Journal of Advanced Transportation, 2019, 4023970.
Ji, F., Pan, Y., Zhou, Y., Du, F., Zhang, Q., & Li, G. (2020). Energy recovery based on pedal situation for regenerative braking system of electric vehicle. Vehicle System Dynamics, 58(1), 144–173.
Kim, J., Kim, H., Bae, J., Kim, D., Eo, J. S., & Kim, K. K. K. (2020). Economic nonlinear predictive control for real-time optimal energy management of parallel hybrid electric vehicles. IEEE Access, 8, 177896-177920.
Kovaceva, J., Isaksson-Hellman, I., & Murgovski, N. (2020). Identification of aggressive driving from naturalistic data in car-following situations. Journal of safety research, 73, 225-234.
Kumar, R., Divyanshu, & Kumar, A. (2021). Nature based self-learning mechanism and simulation of automatic control smart hybrid antilock braking system. Wireless Personal Communications, 116(4), 3291-3308.
Lee, J. D., Liu, S. Y., Domeyer, J., & DinparastDjadid, A. (2021). Assessing drivers’ trust of automated vehicle driving styles with a two-part mixed model of intervention tendency and magnitude. Human factors, 63(2), 197-209.
Li, R., Wang, H., Dai, H., Hong, J., Tong, G., & Chen, X. (2022). Accurate state of charge prediction for real-world bat-tery systems using a novel dual-dropout-based neural network. Energy, 250, 123853.
Li, S., Li, P., Yao, Y., Han, X., Xu, Y., & Chen, L. (2020). Analysis of drivers’ deceleration behavior based on natural-istic driving data. Traffic injury prevention, 21(1), 42-47.
Li, Z., Zhang, Q., & Zhao, X. (2017). Performance analysis of K-nearest neighbor, support vector machine, and artificial neural network classifiers for driver drowsiness detection with different road geometries. International Journal of Distributed Sensor Networks, 13(9), 1550147717733391.
Limpert, R. (2011). Brake design and safety. SAE international.
Little, J. (2004). Development of the drivetrain including brakes and wheels for the Formula SAE-A vehicle.
Liu, T., Fu, R., Ma, Y., Liu, Z. F., & Cheng, W. (2020). Car-following warning rules considering driving styles. China Journal of Highway and Transport, 33(02), 170-180.
Liu, Y., Pei, X., & Guo, X. (2022). Redundancy control of anti-lock braking system based on electro-hydraulic braking system. SAE International journal of vehicle dynamics, stability, and NVH, 7(10-07-01-0004), 53-67.
Liu, Y., Zhao, P., Qin, D., Li, G., Chen, Z., & Zhang, Y. (2019). Driving intention identification based on long short-term memory and a case study in shifting strategy optimization. IEEE Access, 7, 128593-128605.
Loiselle, J., McCann, J. P., & Scott, A. (2010). Design and Analysis of a FSAE Racecar.
Mahajan, P., Gupta, D., & Chawla, V. K. (2021). Design and analysis of brake disc assembly for an FSAE vehicle. Ma-terials Today: Proceedings, 47, 3407-3412.
Milliken, W. F., & Milliken, D. L. (1995). Race car vehicle dynamics. SAE International.
Misra, S., Chandra, S., & Bagwadi, A. (2018, May). Experimental investigation of disc brakes for formula Bharat. In AIP Conference Proceedings (Vol. 1953, No. 1, p. 130008). AIP Publishing LLC.
Nadeau, J., Micheau, P., & Boisvert, M. (2019). Collaborative control of a dual electro-hydraulic regenerative brake system for a rear-wheel-drive electric vehicle. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 233(4), 1035-1046.
Nan, S., Tu, R., Li, T., Sun, J., & Chen, H. (2022). From driving behavior to energy consumption: A novel method to predict the energy consumption of electric bus. Energy, 261, 125188.
Odngam, S., Intacharoen, P., Tanman, N., & Sumpavakup, C. (2024). The Design of Distance-Warning and Brake Pres-sure Control Systems Incorporating LiDAR Technology for Use in Autonomous Vehicles. World Electric Vehicle Journal, 15(12).
Otkur, M. (2024). Thermal Analysis and Optimization of a Disc Brake Rotor for a Formula SAE Race Car. Journal of Fluid Flow, 11.
Pandit, A., & Chawla, V. K. (2021). Design and manufacturing of a fuel tank for formula SAE vehicle. Materials Today: Proceedings, 43, 148-153.
Patel, H. (2014). Design of hydraulic braking system of an FSAE car (Doctoral Dissertation, Department of Mechanical Engineering K J Somaiya College of Engineering, Mumbai University), India.
Pawar, N. M., Khanuja, R. K., Choudhary, P., & Velaga, N. R. (2020). Modelling braking behaviour and accident proba-bility of drivers under increasing time pressure conditions. Accident Analysis & Prevention, 136, 105401.
Pawar, N. M., Velaga, N. R., & Sharmila, R. B. (2022). Exploring behavioral validity of driving simulator under time pressure driving conditions of professional drivers. Transportation research part F: traffic psychology and behav-iour, 89, 29-52.
Plessen, M. G., Bernardini, D., Esen, H., & Bemporad, A. (2017). Spatial-based predictive control and geometric corri-dor planning for adaptive cruise control coupled with obstacle avoidance. IEEE Transactions on Control Systems Technology, 26(1), 38-50.
Queipo, N. V., & Nava, E. (2019). A gradient boosting approach with diversity promoting measures for the ensemble of surrogates in engineering. Structural and Multidisciplinary Optimization, 60(4), 1289-1311.
Rastgoo, M. N., Nakisa, B., Maire, F., Rakotonirainy, A., & Chandran, V. (2019). Automatic driver stress level classifi-cation using multimodal deep learning. Expert Systems with Applications, 138, 112793.
Robert Bosch GmbH. (2022). Automotive handbook. John Wiley & Sons.
Saibernard, Y., & Kumar, B. N. Yaw Controller and Independent Braking System.
Sah, K., Kaushal, R., Chauhan, P., & Chawla, V. K. (2020, October). Modeling and Simulation of Steering and Front Wheel Assembly for FSAE Vehicle. In International Conference on Energy, Materials Sciences & Mechanical Engi-neering (pp. 537-555). Singapore: Springer Nature Singapore.
Sargini, M. I. M., Masood, S. H., Palanisamy, S., Jayamani, E., & Kapoor, A. (2021). Additive manufacturing of an au-tomotive brake pedal by metal fused deposition modelling. Materials Today: Proceedings, 45, 4601-4605.
Scheitlin, M. (2011). Renewable Energy Vehicle Project: Pedal Box Design for Formula SAE. The University of West-ern Australia.
Schmidt, B. THE IMPORTANCE OF THE WEIGHT DISTRIBUTION OF A VEHICLE DURING BRAKING.
Shah, D., & Lee, C. (2021). Analysis of effects of driver’s evasive action time on rear-end collision risk using a driving simulator. Journal of safety research, 78, 242-250.
Sharma, V., Dhauni, S., & Chawla, V. K. (2021). Design and manufacturing of air intake assembly for formula SAE ve-hicle. Materials Today: Proceedings, 43, 58-64.
Shelar, P. B., & Patil, R. S. Design, Development and Analysis of Hydraulic Disc Brake System for Formula Student Race Car.
Shi, J., Sun, D., Hu, M., Liu, S., Kan, Y., Chen, R., & Ma, K. (2020). Prediction of brake pedal aperture for automatic wheel loader based on deep learning. Automation in Construction, 119, 103313.
Singh, C., Jain, U., Singh, R., & Agrawal, B. N. (2022, August). Design and Simulation for Brake Pedal of Aluminium Alloy. In Biennial International Conference on Future Learning Aspects of Mechanical Engineering (pp. 147-155). Singapore: Springer Nature Singapore.
Singhal, M. U. G. (2018). Design and Analysis of Braking System for FSAE. International Journal for Scientific Re-search & Development, 6, 1877-81.
Wan Ghazali, W. N. M. (2009). Design and Analysis of a Pedal Box System for FSAE 2010.
Wang, Z., Zhou, X., Yang, C., Chen, Z., & Wu, X. (2017). An experimental study on hysteresis characteristics of a pneumatic braking system for a multi-axle heavy vehicle in emergency braking situations. Applied Sciences, 7(8), 799.
Wu, B., Zhu, Y., Nishimura, S., & Jin, Q. (2020). Analyzing the effects of driving experience on prebraking behaviors based on data collected by motion capture devices. IEEE Access, 8, 197337-197351.
Wu, X., Boyle, L. N., Marshall, D., & O’Brien, W. (2018). The effectiveness of auditory forward collision warning alerts. Transportation research part F: traffic psychology and behaviour, 59, 164-178.
Wu, Y., Abdel-Aty, M., Park, J., & Zhu, J. (2018). Effects of crash warning systems on rear-end crash avoidance behav-ior under fog conditions. Transportation research part C: emerging technologies, 95, 481-492.
Yang, J., Peng, W., & Sun, C. (2021). A learning control method of automated vehicle platoon at straight path with ddpg-based pid. Electronics, 10(21), 2580.
Yang, W., Liu, J., Zhou, K., Zhang, Z., & Qu, X. (2020). An automatic emergency braking model considering driver’s intention recognition of the front vehicle. Journal of advanced transportation, 2020(1), 5172305.
Yang, Y., He, Y., Yang, Z., Fu, C., & Cong, Z. (2020). Torque coordination control of an electro-hydraulic composite brake system during mode switching based on braking intention. Energies, 13(8), 2031.
Yıldız, B. S. (2020). The spotted hyena optimization algorithm for weight-reduction of automobile brake components. Materials Testing, 62(4), 383-388.
Yıldız, B. S., & Yıldız, A. R. (2019). The Harris hawks optimization algorithm, salp swarm algorithm, grasshopper op-timization algorithm and dragonfly algorithm for structural design optimization of vehicle components. Materials Testing, 61(8), 744-748.
Yildiz, B. S., Bureerat, S., Panagant, N., Mehta, P., & Yildiz, A. R. (2022). Reptile search algorithm and kriging surro-gate model for structural design optimization with natural frequency constraints. Materials Testing, 64(10), 1504-1511.
Yıldız, B. S., Kumar, S., Pholdee, N., Bureerat, S., Sait, S. M., & Yildiz, A. R. (2022). A new chaotic Lévy flight distri-bution optimization algorithm for solving constrained engineering problems. Expert Systems, 39(8), e12992.
Yıldız, B. S., Mehta, P., Panagant, N., Mirjalili, S., & Yildiz, A. R. (2022). A novel chaotic Runge Kutta optimization algorithm for solving constrained engineering problems. Journal of Computational Design and Engineering, 9(6), 2452-2465.
Yıldız, B. S., Yıldız, A. R., Pholdee, N., Bureerat, S., Sait, S. M., & Patel, V. (2020). The Henry gas solubility optimiza-tion algorithm for optimum structural design of automobile brake components. Materials Testing, 62(3), 261-264.
Yildiz, A. R., & Mehta, P. (2022). Manta ray foraging optimization algorithm and hybrid Taguchi salp swarm-Nelder–Mead algorithm for the structural design of engineering components. Materials Testing, 64(5), 706-713.
Yong, J., Gao, F., Ding, N., & He, Y. (2017). Design and validation of an electro-hydraulic brake system using hard-ware-in-the-loop real-time simulation. International Journal of Automotive Technology, 18(4), 603-612.
Zarizambri Bin Ahmad, Z. (2012). Design and Analysis of a Pedal Box System for a small Race-car.
Zhao, X., Li, L., Wang, X., Mei, M., Liu, C., & Song, J. (2019). Braking force decoupling control without pressure sen-sor for a novel series regenerative brake system. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 233(7), 1750-1766.
Zhao, X., Wang, S., Ma, J., Yu, Q., Gao, Q., & Yu, M. (2019). Identification of driver’s braking intention based on a hy-brid model of GHMM and GGAP-RBFNN. Neural Computing and Applications, 31(Suppl 1), 161-174.