How to cite this paper
Chahal, V & Narwal, M. (2017). An empirical review of lean manufacturing and their strategies.Management Science Letters , 7(7), 321-336.
Refrences
Abdollahi, M., Arvan, M., & Razmi, J. (2015). An integrated approach for supplier portfolio selection: Lean or agile? Expert Systems with Applications, 42(1), 679–690.
Abdulmalek, F. A., & Rajgopal, J. (2007). Analyzing the benefits of lean manufacturing and value stream mapping via simulation: A process sector case study. International Journal of Production Economics, 107(1), 223–236. http://doi.org/10.1016/j.ijpe.2006.09.009
Achanga, P., Shehab, E., Roy, R., & Nelder, G. (2012). A fuzzy-logic advisory system for lean manufacturing within SMEs. International Journal of Computer Integrated Manufacturing, 25(9), 839–852. http://doi.org/10.1080/0951192X.2012.665180
Aikhuele, D. O., & Souleman, F. S. (2014). Australian Journal of Basic and Applied Sciences Application of Fuzzy AHP for Ranking Critical Success Factors for the Successful Implementation of Lean Production Technique, 8(December), 399–407.
Aitken, J., Christopher, M., & Towill, D. (2002). Understanding, Implementing and Exploiting Agility and Leanness. International Journal of Logistics Research and Applications, 5(1), 59–74.
Alaskari, O., M.M., A., Dhafr, N., & Pinedo-Cuenca., R. (2012). Critical Successful Factors (CSFs) for Successful Implementation of Lean Tools and ERP Systems. Lecture Notes in Engineering and Computer Science, 2199(1), 1627–1632.
Amin, M. Al, & Karim, M. a. (2012). A time-based quantitative approach for selecting lean strategies for manufacturing organisations. International Journal of Production Research, 51(May 2014), 1–22. http://doi.org/10.1080/00207543.2012.693639
Anand, G., & Kodali, R. (2009). Selection of lean manufacturing systems using the analytic network process - a case study. Journal of Manufacturing Technology Management, 20(2), 258–289.
Bamber, L., & Dale, B. G. (2000). Lean production: A study of application in a traditional manufacturing environment. Production Planning & Control, 11(3), 291–298.
Basu, P., & Dan, P. K. (2014). Capacity augmentation with VSM methodology for lean manufacturing. International Journal of Lean Six Sigma, 5(3), 279–292.
Begam, M., Swamynathan, R., & Sikkizhar, J. (2013). Current trends on lean management – A review. International Journal of Lean Thinking, 4(2), 1–7.
Behrouzi, F., & Wong, K. Y. (2011). Lean performance evaluation of manufacturing systems: A dynamic and innovative approach. Procedia Computer Science, 3, 388–395.
Belekoukias, I., Garza-Reyes, J. A., & Kumar, V. (2014). The impact of lean methods and tools on the operational performance of manufacturing organisations. International Journal of Production Research, 7543(July 2014), 1–21. http://doi.org/10.1080/00207543.2014.903348
Bhamu, J., & Sangwan, K. S. (2014). Lean manufacturing: literature review and research issues. International Journal of Operations & Production Management, 34(7), 876–940.
Bortolotti, T., Boscari, S., & Danese, P. (2015). Successful lean implementation: Organizational culture and soft lean practices. International Journal of Production Economics, 160, 182–201.
Brintrup, A., Ranasinghe, D., & McFarlane, D. (2010). RFID opportunity analysis for leaner manufacturing. International Journal of Production Research, 48(9), 2745–2764.
Chakraborttya, R., & Paul, S. (2011). Study and implementation of lean manufacturing in a garment manufacturing company: Bangladesh perspective. Journal of Optimization in Industrial Engineering, 7, 11–22.
Chakraborty, A., Bhattacharya, M., Ghosh, S., & Sarkar, G. (2013). Importance of kaizen concept in medium manufacturing enterprises. International Journal of Management and Strategy, 4(6).
Chauhan, G., & Sharma, T. P. S. S. K. (2010). Measuring the status of lean manufacturing using AHP. Production, 1(2), 115–120.
Chiarini, A. (2013). Waste savings in patient transportation inside large hospitals using lean thinking tools and logistic solutions. Leadership in Health Services, 26(4), 356–367.
Cottyn, J., Van Landeghem, H., Stockman, K., & Derammelaere, S. (2011). A method to align a manufacturing execution system with Lean objectives. International Journal of Production Research, 49(14), 4397–4413. http://doi.org/10.1080/00207543.2010.548409
Cua, K. O., McKone, K. E., & Schroeder, R. G. (2001). Relationships between implementation of TQM, JIT, and TPM and manufacturing performance. Journal of Operations Management, 19(6), 675–694. http://doi.org/10.1016/S0272-6963(01)00066-3
Detty, R., & Yingling, J. (2000). Quantifying benefits of conversion to lean manufacturing with discrete event simulation: A case study. International Journal of Production Research, 38(2), 429–445.
Diaz-Elsayed, N., Jondral, A., Greinacher, S., Dornfeld, D., & Lanza, G. (2013). Assessment of lean and green strategies by simulation of manufacturing systems in discrete production environments. CIRP Annals - Manufacturing Technology, 62(1), 475–478.
Eswaramoorthi, M., Kathiresan, G. R., Jayasudhan, T. J., Prasad, P. S. S., & Mohanram, P. V. (2012). Flow index based line balancing: a tool to improve the leanness of assembly line design. International Journal of Production Research, 50(12), 3345–3358.
Eswaramoorthi, M., Kathiresan, G. R., Prasad, P. S. S., & Mohanram, P. V. (2011). A survey on lean practices in Indian machine tool industries. International Journal of Advanced Manufacturing Technology, 52(9-12), 1091–1101. http://doi.org/10.1007/s00170-010-2788-y
Forza, C. (1996). Work organization in lean production and traditional plants: what are the differ-ences?. International Journal of Operations & Production Management, 16(2), 42-62.
Fullerton, R. R., McWatters, C. S., & Fawson, C. (2003). An examination of the relationships between JIT and financial performance. Journal of Operations Management, 21(4), 383–404.
Garza-Reyes, J. A., Parkar, H. S., Oraifige, I., Soriano-Meier, H., & Harmanto, D. (2012). An empirical-exploratory study of the status of lean manufacturing in India. International Journal of Business Excellence, 5(4), 395–412. http://doi.org/10.1504/IJBEX.2012.047906
Gautam, N., & Singh, N. (2008). Lean product development: Maximizing the customer perceived value through design change (redesign). International Journal of Production Economics, 114(1), 313–332. http://doi.org/10.1016/j.ijpe.2006.12.070
Gautam, R., & Kumar, S. (2012). Kaizen Implementation in an Industry in India : A Case Study, 5762, 25–33.
Gollan, P. J., Kalfa, S., Agarwal, R., Green, R., Randhawa, K., Gollan, P. J., … Green, R. (2015). Lean manufacturing as a high-performance work system : the case of Cochlear. International Journal of Production Research, 7543(December), 6434–6447. http://doi.org/10.1080/00207543.2014.940430
Gopinath, S., & Freiheit, T. I. (2012). A waste relationship model and center point tracking metric for lean manufacturing systems. IIE Transactions, 44(2), 136–154.
Goriwondo, W. M., Mhlanga, S., & Marecha, A. (2011). Use O F the V Alue S Tream M Apping T Ool F or W Aste R Eduction I N M Anufacturing . C Ase S Tudy for Bread Manufacturing in Zimbabwe. International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, 236–241.
Green, J. C., Lee, J., & Kozman, T. A. (2010). Managing lean manufacturing in material handling operations. International Journal of Production Research, 48(10), 2975–2993.
Gunasekharan, S., Elangovan, D., & Parthiban, P. (2014). A Comprehensive Study to Evaluate the Critical Success Factors Affecting Lean Concept in Indian Manufacturing Industries. Applied Mechanics and Materials, 592-594, 2569–2576.
Gupta, S., & Jain, S. K. (2013). A literature review of lean manufacturing. International Journal of Management Science and Engineering Management, 8(4), 241–249.
Harris, G., Stone, K. B., Mayeshiba, T., Componation, P. J., & Farrington, P. A. (2014). Transitioning from teaching lean tools to teaching lean transformation. Journal of Enterprise Transformation, 4(3), 191–204.
Hartini, S., & Ciptomulyono, U. (2015). The Relationship between Lean and Sustainable Manufacturing on Performance: Literature Review. Procedia Manufacturing, 4(Iess), 38–45.
Hines, P., Hines, P., Rich, N., Rich, N., Esain, A., Esain, A., … Benchmarking, K. (1999). A distribution industry application. International Journal, 6(1), 60–77.
Hines, P., Rich, N., Hines, P., & Rich, N. (1997). The seven value stream mapping tools. International Journal of Operations & Production Management The, 17(1), 46–64.
Hodge, G. L., Goforth Ross, K., Joines, J. a., & Thoney, K. (2011). Adapting lean manufacturing principles to the textile industry. Production Planning & Control, 22(3), 237–247.
Isaksson, O. H. D., & Seifert, R. W. (2013). Inventory leanness and the financial performance of firms. Production Planning & Control, 25(12), 999–1014. http://doi.org/10.1080/09537287.2013.797123
Jadhav, J. R., Mantha, S. S., & Rane, S. B. (2014). Development of framework for sustainable Lean implementation: an ISM approach. Journal of Industrial Engineering International, 10(3), 72.
Jadhav, J. R., Mantha, S. S., & Rane, S. B. (2015). Roadmap for Lean implementation in Indian automotive component manufacturing industry: comparative study of UNIDO Model and ISM Model. Journal of Industrial Engineering International, 11(2), 179–198.
Jain, V., Benyoucef, L., & Deshmukh, S. G. (2008). What’s the buzz about moving from “lean” to “agile” integrated supply chains? A fuzzy intelligent agent-based approach. International Journal of Production Research, 46(23), 6649–6677. http://doi.org/10.1080/00207540802230462
Jainury, S. M., Ramli, R., & Rahman, M. N. a. (2012). Applying lean principles , tools and techniques in set parts supply implementation. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 6(12), 76–80.
Jiménez, E., Tejeda, a., Pérez, M., Blanco, J., & Martínez, E. (2012). Applicability of lean production with VSM to the Rioja wine sector. International Journal of Production Research, 50(7), 1890–1904. http://doi.org/10.1080/00207543.2011.561370
Karim, A., & Arif‐Uz‐Zaman, K. (2013). A methodology for effective implementation of lean strategies and its performance evaluation in manufacturing organizations. Business Process Management Journal, 19(1), 169–196. http://doi.org/10.1108/14637151311294912
Khadse, P. B., Sarode, A. D., & Wasu, R. (2013). Lean Manufacturing in Indian Industries A Review, 3(1), 175–181.
Khanchanapong, T., Prajogo, D., Sohal, A. S., Cooper, B. K., Yeung, A. C. L., & Cheng, T. C. E. (2014). The unique and complementary effects of manufacturing technologies and lean practices on manufacturing operational performance. International Journal of Production Economics, 153, 191–203. http://doi.org/10.1016/j.ijpe.2014.02.021
Kim, D., & Park, H.-S. (2006). Innovative construction management method: Assessment of lean construction implementation. KSCE Journal of Civil Engineering, 10(6), 381–388.
Kisombe, S. M. (2012). Lean manufacturing tools and techniques in industrial operations: A Survey of the sugar sector in Kenya. Unpublished MBA Research Project). University of Nairobi, Nairobi, 1–15.
Krishnan, V., & Parveen, C. M. (2013). Comparative studyof lean manufacturing tools used in manufacturing firms and service sector. Lecture Notes in Engineering and Computer Science, 1 LNECS, 604–608.
Kumar, N., Kumar, S., Haleem, A., & Gahlot, P. (2013). Implementing lean manufacturing system: ISM approach. Journal of Industrial Engineering and Management, 6(4), 996–1012.
Kumar, P., & Kajal, S. (2015). Implementation of Lean Manufacturing in a Small-Scale Industry. IUP Journal of Operations Management, 14(2), 25–33.
Kumar, P., & Pandey, V. (2013). KAIZEN : A Case study in small scale organizations, 2(May), 133–136.
Mabry, B. G., & Morrison, K. R. (1996). Transformation to lean manufacturing by an automotive component supplier. Computers & Industrial Engineering, 31(1-2), 95-98.
Mahdiloo, M., Noorizadeh, A., & Farzipoor Saen, R. (2014). Benchmarking suppliers’ performance when some factors play the role of both inputs and outputs: A new development to the slacks-based measure of efficiency. Benchmarking: An International Journal, 21(5), 792-813.
Miller, G., Pawloski, J., & Standridge, C. (2010). A case study of lean, sustainable manufacturing. Journal of Industrial Engineering and Management, 3(1), 11–32.
Modi, D. B., & Thakkar, H. (2014). Lean Thinking : Reduction of Waste , Lead Time , Cost through Lean Manufacturing Tools and Technique. International Journal of Emerging Technologies and Advanced Engineering, 4(3), 339–344.
Mohanraj, R., Sakthivel, M., & Vinodh, S. (2011). QFD integrated value stream mapping: an enabler of lean manufacturing. International Journal of Productivity and Quality Management, 7(4), 501–522. http://doi.org/10.1504/IJPQM.2011.040546
Mostafa, S., Dumrak, J., & Soltan, H. (2013). A framework for lean manufacturing implementation. Production & Manufacturing Research, 1(1), 44–64. http://doi.org/10.1080/21693277.2013.862159
Naylor, J. Ben, Naim, M., & Berry, D. (1999). Leagility: integrating the lean and agile manufacturing in the total supply chain. International Journal of Production Economics, 62, 107–118.
Nithia, K. ., Noordin, M. Y., & Saman, M. Z. M. (2015). Lean Production Weaknesses in Manufacturing Industry: A Review. Applied Mechanics and Materials, 735, 344–348.
Obeidat, M. S., & Pei, Z. J. (2012). Implementing Lean Manufacturing in the Sewing Industry. Industrial Systems Engineering Research Conference, 8289(November 2014), 1–8.
Ozelkan, E., & Galambosi, A. (2009). Lampshade Game for lean manufacturing. Production Planning & Control, 20(5), 385–402. http://doi.org/10.1080/09537280902875419
Paez, O., Dewees, J., Genaidy, A., Tuncel, S., Karwowski, W., & Zurada, J. (2004). The lean manufacturing enterprise: An emerging sociotechnological system integration. Human Factors and Ergonomics In Manufacturing, 14(3), 285–306. http://doi.org/10.1002/hfm.10067
Paez, O., Salem, S., Solomon, J., & Genaidy, A. (2005). Moving from lean manufacturing to lean construction: Toward a common sociotechnological framework. Human Factors and Ergonomics In Manufacturing, 15(2), 233–245. http://doi.org/10.1002/hfm.20023
Pakdil, F., & Leonard, K. M. (2014). Criteria for a lean organisation: development of a lean assessment tool. International Journal of Production Research, 52(15), 4587–4607.
Panizzolo, R., Garengo, P., Sharma, M. K., & Gore, A. (2012). Lean manufacturing in developing countries: evidence from Indian SMEs. Production Planning & Control, 23(10-11), 769–788.
Parry, G., & Turner, C. (2006). Application of lean visual process management tools. Production Planning & Control, 17(Janeiro 2006), 77–86. http://doi.org/10.1080/09537280500414991
Patel, N., Chauhan, N., & Trivedi, P. (2015). Benefits of Value Stream Mapping as A Lean Tool Implementation Manufacturing Industries: A Review. IJIRST –International Journal for Innovative Research in Science & Technology, 1(8), 53–57.
Pattanaik, L. N., & Sharma, B. P. (2009). Implementing lean manufacturing with cellular layout: A case study. International Journal of Advanced Manufacturing Technology, 42(7-8), 772–779.
Pekuri, A., Herrala, M., Aapaoja, A., & Haapasalo, H. (2012). Applying Lean in Construction – Cornerstones for Implementation. Proceedings for the 20th Annual Conference of the International Group for Lean Construction.
Pettersen, J. (2009). Defining lean production: some conceptual and practical issues. The TQM Journal, 21(2), 127–142. http://doi.org/10.1108/17542730910938137
Poksinska, B. (2010). The current state of Lean implementation in health care : literature review. Quality Management in Health Care, 19(4), 319–329.
Rajenthirakumar, D., & Thyla, P. (2011). Transformation to lean manufacturing by an automative component manufacturing company. International Journal of Lean Thinking, 2(2), 1–13. Retrieved from http://www.ita.mx/files/gui-ingles-tecnico-nov-2012/ing-industrial-2-11-2012-1.pdf
Ramnath, B. V., Elanchezhian, C., & Kesavan, R. (2010). Application Of Kanban System For Implementing Lean Manufacturing (A Case Study). Journal of Engineering Research and Studies, I(I), 13.
Rose, A. N. M., Md. Deros, B., & Ab. Rahman, M. N. (2013). A study on lean manufacturing implementation in Malaysian automotive component industry. International Journal of Automotive and Mechanical Engineering, 8(1), 1467–1476. http://doi.org/10.15282/ijame.8.2013.33.0121
Roslin, E. N., Shamsuddin, A., & Dawal, S. Z. M. (2014). Discovering Barriers of Lean Manufactur-ing System Implementation in Malaysian Automotive Industry. In Advanced Materials Re-search (Vol. 845, pp. 687-691). Trans Tech Publications.
Sahoo, A. K., Singh, N. K., Shankar, R., & Tiwari, M. K. (2008). Lean philosophy: Implementation in a forging company. International Journal of Advanced Manufacturing Technology, 36(5-6), 451–462.
Satao, S. M., Thampi, D. G. T., Dalvi, S. d., Srinivas, B., & Patil, B. T. (2012). Enhancing Waste Reduction through Lean Manufacturing Tools and Techniques , a Methodical Step in the Territory of Green Manufacturing. IRACST - International Journal of Research in Management & Technology (IJRMT), 2(2), 253–257.
Schwarz, P., Pannes, K. D., Nathan, M., Reimer, H. J., Kleespies, A., Kuhn, N., … Z??gel, N. P. (2011). Lean processes for optimizing or capacity utilization: Prospective analysis before and after implementation of value stream mapping (VSM). Langenbeck’s Archives of Surgery, 396(7), 1047–1053. http://doi.org/10.1007/s00423-011-0833-4
Seyedhosseini, S. M., Taleghani, A. E., Bakhsha, A., & Partovi, S. (2011). Extracting leanness criteria by employing the concept of Balanced Scorecard. Expert Systems with Applications, 38(8), 10454–10461. http://doi.org/10.1016/j.eswa.2011.02.095
Shah, R., & Ward, P. T. (2003). Lean manufacturing: Context, practice bundles, and performance. Journal of Operations Management, 21(2), 129–149.
Singh, B., Garg, S. K., & Sharma, S. K. (2010). Development of index for measuring leanness: study of an Indian auto component industry. Measuring Business Excellence, 14(2), 46–53.
Singh, B., Garg, S. K., Sharma, S. K., & Grewal, C. (2010). Lean implementation and its benefits to production industry. International Journal of Lean Six Sigma, 1(2), 157–168.
Soriano‐Meier, H., & Forrester, P. L. (2002). A model for evaluating the degree of leanness of manufacturing firms. Integrated Manufacturing Systems, 13(2), 104–109.
Stanleigh, M (2008). Effeting successful changemanagment initiatives, Industrial and commercial training, 40, 34-37
Stewart, S., & Adams, M. (1998). The lean manufacturing champion: reducing time and risk by encouraging risk-taking. Strategic Change, 7(6), 357–366.
Storch, R. L. (1999). Improving flow to achieve lean manufacturing in shipbuilding. Production Planning & Control, 10(February 2015), 127–137. http://doi.org/10.1080/095372899233280
Sundar, R., Balaji, A. N., & Satheesh Kumar, R. M. (2014). A review on lean manufacturing implementation techniques. Procedia Engineering, 97, 1875–1885.
Susilawati, A., Tan, J., Bell, D., & Sarwar, M. (2015). Fuzzy logic based method to measure degree of lean activity in manufacturing industry. Journal of Manufacturing Systems, 34(C), 1–11.
Thirunavukkarasu, S., Bheeman, B. V, Ashwin, R., Varadharajan, M., Devadasan, S. R., & Murugesh, R. (2013). Lean implementation through value stream mapping: A case study in an Indian pump manufacturing company. International Journal of Services and Operations Management, 16(4), 506–524. http://doi.org/10.1504/IJSOM.2013.057511
Vamsi, N., Jasti, K., & Kodali, R. (2014). A literature review of empirical research methodology in lean manufacturing. International Journal of Operations & Production Management, 34(10), 1080–1122. http://doi.org/10.1108/IJOPM-04-2012-0169
Vinodh, S., & Balaji, S. R. (2011). Fuzzy logic based leanness assessment and its decision support system. International Journal of Production Research, 49(13), 4027–4041.
Vinodh, S., & Chintha, S. K. (2011a). Application of fuzzy QFD for enabling agility in a manufacturing organization: A case study. The TQM Journal, 23(3), 343–357.
Vinodh, S., & Chintha, S. K. (2011b). Leanness assessment using multi-grade fuzzy approach. International Journal of Production Research, 49(2), 431–445.
Vinodh, S., & Joy, D. (2012). Structural Equation Modelling of lean manufacturing practices. International Journal of Production Research, 50(6), 1598–1607.
Vinodh, S., & Vimal, K. E. K. (2012). Thirty criteria based leanness assessment using fuzzy logic approach. International Journal of Advanced Manufacturing Technology, 60(9-12), 1185–1195.
Vrijhoef, R., & Koskela, L. (2000). The four roles of supply chain management in construction. European Journal of Purchasing & Supply Management, 6(3-4), 169–178.
Wan, H.-D., & Chen, F. F. (2008). A leanness measure of manufacturing systems for quantifying impacts of lean initiatives. International Journal of Production Research, 4623(23), 6567–6584.
Wong, W. P., Ignatius, J., & Soh, K. L. (2012). What is the leanness level of your organisation in lean transformation implementation? An integrated lean index using ANP approach. Production Planning & Control, 25(4), 273–287. http://doi.org/10.1080/09537287.2012.674308
Yang, M. G., Hong, P., & Modi, S. B. (2011). Impact of lean manufacturing and environmental management on business performance: An empirical study of manufacturing firms. International Journal of Production Economics, 129(2), 251–261. http://doi.org/10.1016/j.ijpe.2010.10.017
Yang, T., Hsieh, C.-H., & Cheng, B.-Y. (2011). Lean-pull strategy in a re-entrant manufacturing environment: a pilot study for TFT-LCD array manufacturing. International Journal of Production Research, 49(6), 1511–1529. http://doi.org/10.1080/00207540903567333
Yang, T., Kuo, Y., Su, C. T., & Hou, C. L. (2015). Lean production system design for fishing net manufacturing using lean principles and simulation optimization. Journal of Manufacturing Systems, 34(1), 66–73. http://doi.org/10.1016/j.jmsy.2014.11.010
Yusup, M. Z., Mahmood, W. H. W., Salleh, M. R., & Yusof, A. S. M. (2015). Review the influence of Lean tools and its performance against the index of manufacturing sustainability. International Journal of Agile Systems and Management, 8(2), 116–131.
Zanjirchi, S. M., Tooranlo, H. S., & Nejad, L. Z. (2010). Measuring Organizational Leanness Using Fuzzy Approach. Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management, 144–156.
Zargun, S., & Al-Ashaab, A. (2013). Critical Success Factors for Lean Manufacturing: A Systematic Literature Review an International Comparison between Developing and Developed Countries. Advanced Materials Research, 845, 668–681.
Abdulmalek, F. A., & Rajgopal, J. (2007). Analyzing the benefits of lean manufacturing and value stream mapping via simulation: A process sector case study. International Journal of Production Economics, 107(1), 223–236. http://doi.org/10.1016/j.ijpe.2006.09.009
Achanga, P., Shehab, E., Roy, R., & Nelder, G. (2012). A fuzzy-logic advisory system for lean manufacturing within SMEs. International Journal of Computer Integrated Manufacturing, 25(9), 839–852. http://doi.org/10.1080/0951192X.2012.665180
Aikhuele, D. O., & Souleman, F. S. (2014). Australian Journal of Basic and Applied Sciences Application of Fuzzy AHP for Ranking Critical Success Factors for the Successful Implementation of Lean Production Technique, 8(December), 399–407.
Aitken, J., Christopher, M., & Towill, D. (2002). Understanding, Implementing and Exploiting Agility and Leanness. International Journal of Logistics Research and Applications, 5(1), 59–74.
Alaskari, O., M.M., A., Dhafr, N., & Pinedo-Cuenca., R. (2012). Critical Successful Factors (CSFs) for Successful Implementation of Lean Tools and ERP Systems. Lecture Notes in Engineering and Computer Science, 2199(1), 1627–1632.
Amin, M. Al, & Karim, M. a. (2012). A time-based quantitative approach for selecting lean strategies for manufacturing organisations. International Journal of Production Research, 51(May 2014), 1–22. http://doi.org/10.1080/00207543.2012.693639
Anand, G., & Kodali, R. (2009). Selection of lean manufacturing systems using the analytic network process - a case study. Journal of Manufacturing Technology Management, 20(2), 258–289.
Bamber, L., & Dale, B. G. (2000). Lean production: A study of application in a traditional manufacturing environment. Production Planning & Control, 11(3), 291–298.
Basu, P., & Dan, P. K. (2014). Capacity augmentation with VSM methodology for lean manufacturing. International Journal of Lean Six Sigma, 5(3), 279–292.
Begam, M., Swamynathan, R., & Sikkizhar, J. (2013). Current trends on lean management – A review. International Journal of Lean Thinking, 4(2), 1–7.
Behrouzi, F., & Wong, K. Y. (2011). Lean performance evaluation of manufacturing systems: A dynamic and innovative approach. Procedia Computer Science, 3, 388–395.
Belekoukias, I., Garza-Reyes, J. A., & Kumar, V. (2014). The impact of lean methods and tools on the operational performance of manufacturing organisations. International Journal of Production Research, 7543(July 2014), 1–21. http://doi.org/10.1080/00207543.2014.903348
Bhamu, J., & Sangwan, K. S. (2014). Lean manufacturing: literature review and research issues. International Journal of Operations & Production Management, 34(7), 876–940.
Bortolotti, T., Boscari, S., & Danese, P. (2015). Successful lean implementation: Organizational culture and soft lean practices. International Journal of Production Economics, 160, 182–201.
Brintrup, A., Ranasinghe, D., & McFarlane, D. (2010). RFID opportunity analysis for leaner manufacturing. International Journal of Production Research, 48(9), 2745–2764.
Chakraborttya, R., & Paul, S. (2011). Study and implementation of lean manufacturing in a garment manufacturing company: Bangladesh perspective. Journal of Optimization in Industrial Engineering, 7, 11–22.
Chakraborty, A., Bhattacharya, M., Ghosh, S., & Sarkar, G. (2013). Importance of kaizen concept in medium manufacturing enterprises. International Journal of Management and Strategy, 4(6).
Chauhan, G., & Sharma, T. P. S. S. K. (2010). Measuring the status of lean manufacturing using AHP. Production, 1(2), 115–120.
Chiarini, A. (2013). Waste savings in patient transportation inside large hospitals using lean thinking tools and logistic solutions. Leadership in Health Services, 26(4), 356–367.
Cottyn, J., Van Landeghem, H., Stockman, K., & Derammelaere, S. (2011). A method to align a manufacturing execution system with Lean objectives. International Journal of Production Research, 49(14), 4397–4413. http://doi.org/10.1080/00207543.2010.548409
Cua, K. O., McKone, K. E., & Schroeder, R. G. (2001). Relationships between implementation of TQM, JIT, and TPM and manufacturing performance. Journal of Operations Management, 19(6), 675–694. http://doi.org/10.1016/S0272-6963(01)00066-3
Detty, R., & Yingling, J. (2000). Quantifying benefits of conversion to lean manufacturing with discrete event simulation: A case study. International Journal of Production Research, 38(2), 429–445.
Diaz-Elsayed, N., Jondral, A., Greinacher, S., Dornfeld, D., & Lanza, G. (2013). Assessment of lean and green strategies by simulation of manufacturing systems in discrete production environments. CIRP Annals - Manufacturing Technology, 62(1), 475–478.
Eswaramoorthi, M., Kathiresan, G. R., Jayasudhan, T. J., Prasad, P. S. S., & Mohanram, P. V. (2012). Flow index based line balancing: a tool to improve the leanness of assembly line design. International Journal of Production Research, 50(12), 3345–3358.
Eswaramoorthi, M., Kathiresan, G. R., Prasad, P. S. S., & Mohanram, P. V. (2011). A survey on lean practices in Indian machine tool industries. International Journal of Advanced Manufacturing Technology, 52(9-12), 1091–1101. http://doi.org/10.1007/s00170-010-2788-y
Forza, C. (1996). Work organization in lean production and traditional plants: what are the differ-ences?. International Journal of Operations & Production Management, 16(2), 42-62.
Fullerton, R. R., McWatters, C. S., & Fawson, C. (2003). An examination of the relationships between JIT and financial performance. Journal of Operations Management, 21(4), 383–404.
Garza-Reyes, J. A., Parkar, H. S., Oraifige, I., Soriano-Meier, H., & Harmanto, D. (2012). An empirical-exploratory study of the status of lean manufacturing in India. International Journal of Business Excellence, 5(4), 395–412. http://doi.org/10.1504/IJBEX.2012.047906
Gautam, N., & Singh, N. (2008). Lean product development: Maximizing the customer perceived value through design change (redesign). International Journal of Production Economics, 114(1), 313–332. http://doi.org/10.1016/j.ijpe.2006.12.070
Gautam, R., & Kumar, S. (2012). Kaizen Implementation in an Industry in India : A Case Study, 5762, 25–33.
Gollan, P. J., Kalfa, S., Agarwal, R., Green, R., Randhawa, K., Gollan, P. J., … Green, R. (2015). Lean manufacturing as a high-performance work system : the case of Cochlear. International Journal of Production Research, 7543(December), 6434–6447. http://doi.org/10.1080/00207543.2014.940430
Gopinath, S., & Freiheit, T. I. (2012). A waste relationship model and center point tracking metric for lean manufacturing systems. IIE Transactions, 44(2), 136–154.
Goriwondo, W. M., Mhlanga, S., & Marecha, A. (2011). Use O F the V Alue S Tream M Apping T Ool F or W Aste R Eduction I N M Anufacturing . C Ase S Tudy for Bread Manufacturing in Zimbabwe. International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, 236–241.
Green, J. C., Lee, J., & Kozman, T. A. (2010). Managing lean manufacturing in material handling operations. International Journal of Production Research, 48(10), 2975–2993.
Gunasekharan, S., Elangovan, D., & Parthiban, P. (2014). A Comprehensive Study to Evaluate the Critical Success Factors Affecting Lean Concept in Indian Manufacturing Industries. Applied Mechanics and Materials, 592-594, 2569–2576.
Gupta, S., & Jain, S. K. (2013). A literature review of lean manufacturing. International Journal of Management Science and Engineering Management, 8(4), 241–249.
Harris, G., Stone, K. B., Mayeshiba, T., Componation, P. J., & Farrington, P. A. (2014). Transitioning from teaching lean tools to teaching lean transformation. Journal of Enterprise Transformation, 4(3), 191–204.
Hartini, S., & Ciptomulyono, U. (2015). The Relationship between Lean and Sustainable Manufacturing on Performance: Literature Review. Procedia Manufacturing, 4(Iess), 38–45.
Hines, P., Hines, P., Rich, N., Rich, N., Esain, A., Esain, A., … Benchmarking, K. (1999). A distribution industry application. International Journal, 6(1), 60–77.
Hines, P., Rich, N., Hines, P., & Rich, N. (1997). The seven value stream mapping tools. International Journal of Operations & Production Management The, 17(1), 46–64.
Hodge, G. L., Goforth Ross, K., Joines, J. a., & Thoney, K. (2011). Adapting lean manufacturing principles to the textile industry. Production Planning & Control, 22(3), 237–247.
Isaksson, O. H. D., & Seifert, R. W. (2013). Inventory leanness and the financial performance of firms. Production Planning & Control, 25(12), 999–1014. http://doi.org/10.1080/09537287.2013.797123
Jadhav, J. R., Mantha, S. S., & Rane, S. B. (2014). Development of framework for sustainable Lean implementation: an ISM approach. Journal of Industrial Engineering International, 10(3), 72.
Jadhav, J. R., Mantha, S. S., & Rane, S. B. (2015). Roadmap for Lean implementation in Indian automotive component manufacturing industry: comparative study of UNIDO Model and ISM Model. Journal of Industrial Engineering International, 11(2), 179–198.
Jain, V., Benyoucef, L., & Deshmukh, S. G. (2008). What’s the buzz about moving from “lean” to “agile” integrated supply chains? A fuzzy intelligent agent-based approach. International Journal of Production Research, 46(23), 6649–6677. http://doi.org/10.1080/00207540802230462
Jainury, S. M., Ramli, R., & Rahman, M. N. a. (2012). Applying lean principles , tools and techniques in set parts supply implementation. International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, 6(12), 76–80.
Jiménez, E., Tejeda, a., Pérez, M., Blanco, J., & Martínez, E. (2012). Applicability of lean production with VSM to the Rioja wine sector. International Journal of Production Research, 50(7), 1890–1904. http://doi.org/10.1080/00207543.2011.561370
Karim, A., & Arif‐Uz‐Zaman, K. (2013). A methodology for effective implementation of lean strategies and its performance evaluation in manufacturing organizations. Business Process Management Journal, 19(1), 169–196. http://doi.org/10.1108/14637151311294912
Khadse, P. B., Sarode, A. D., & Wasu, R. (2013). Lean Manufacturing in Indian Industries A Review, 3(1), 175–181.
Khanchanapong, T., Prajogo, D., Sohal, A. S., Cooper, B. K., Yeung, A. C. L., & Cheng, T. C. E. (2014). The unique and complementary effects of manufacturing technologies and lean practices on manufacturing operational performance. International Journal of Production Economics, 153, 191–203. http://doi.org/10.1016/j.ijpe.2014.02.021
Kim, D., & Park, H.-S. (2006). Innovative construction management method: Assessment of lean construction implementation. KSCE Journal of Civil Engineering, 10(6), 381–388.
Kisombe, S. M. (2012). Lean manufacturing tools and techniques in industrial operations: A Survey of the sugar sector in Kenya. Unpublished MBA Research Project). University of Nairobi, Nairobi, 1–15.
Krishnan, V., & Parveen, C. M. (2013). Comparative studyof lean manufacturing tools used in manufacturing firms and service sector. Lecture Notes in Engineering and Computer Science, 1 LNECS, 604–608.
Kumar, N., Kumar, S., Haleem, A., & Gahlot, P. (2013). Implementing lean manufacturing system: ISM approach. Journal of Industrial Engineering and Management, 6(4), 996–1012.
Kumar, P., & Kajal, S. (2015). Implementation of Lean Manufacturing in a Small-Scale Industry. IUP Journal of Operations Management, 14(2), 25–33.
Kumar, P., & Pandey, V. (2013). KAIZEN : A Case study in small scale organizations, 2(May), 133–136.
Mabry, B. G., & Morrison, K. R. (1996). Transformation to lean manufacturing by an automotive component supplier. Computers & Industrial Engineering, 31(1-2), 95-98.
Mahdiloo, M., Noorizadeh, A., & Farzipoor Saen, R. (2014). Benchmarking suppliers’ performance when some factors play the role of both inputs and outputs: A new development to the slacks-based measure of efficiency. Benchmarking: An International Journal, 21(5), 792-813.
Miller, G., Pawloski, J., & Standridge, C. (2010). A case study of lean, sustainable manufacturing. Journal of Industrial Engineering and Management, 3(1), 11–32.
Modi, D. B., & Thakkar, H. (2014). Lean Thinking : Reduction of Waste , Lead Time , Cost through Lean Manufacturing Tools and Technique. International Journal of Emerging Technologies and Advanced Engineering, 4(3), 339–344.
Mohanraj, R., Sakthivel, M., & Vinodh, S. (2011). QFD integrated value stream mapping: an enabler of lean manufacturing. International Journal of Productivity and Quality Management, 7(4), 501–522. http://doi.org/10.1504/IJPQM.2011.040546
Mostafa, S., Dumrak, J., & Soltan, H. (2013). A framework for lean manufacturing implementation. Production & Manufacturing Research, 1(1), 44–64. http://doi.org/10.1080/21693277.2013.862159
Naylor, J. Ben, Naim, M., & Berry, D. (1999). Leagility: integrating the lean and agile manufacturing in the total supply chain. International Journal of Production Economics, 62, 107–118.
Nithia, K. ., Noordin, M. Y., & Saman, M. Z. M. (2015). Lean Production Weaknesses in Manufacturing Industry: A Review. Applied Mechanics and Materials, 735, 344–348.
Obeidat, M. S., & Pei, Z. J. (2012). Implementing Lean Manufacturing in the Sewing Industry. Industrial Systems Engineering Research Conference, 8289(November 2014), 1–8.
Ozelkan, E., & Galambosi, A. (2009). Lampshade Game for lean manufacturing. Production Planning & Control, 20(5), 385–402. http://doi.org/10.1080/09537280902875419
Paez, O., Dewees, J., Genaidy, A., Tuncel, S., Karwowski, W., & Zurada, J. (2004). The lean manufacturing enterprise: An emerging sociotechnological system integration. Human Factors and Ergonomics In Manufacturing, 14(3), 285–306. http://doi.org/10.1002/hfm.10067
Paez, O., Salem, S., Solomon, J., & Genaidy, A. (2005). Moving from lean manufacturing to lean construction: Toward a common sociotechnological framework. Human Factors and Ergonomics In Manufacturing, 15(2), 233–245. http://doi.org/10.1002/hfm.20023
Pakdil, F., & Leonard, K. M. (2014). Criteria for a lean organisation: development of a lean assessment tool. International Journal of Production Research, 52(15), 4587–4607.
Panizzolo, R., Garengo, P., Sharma, M. K., & Gore, A. (2012). Lean manufacturing in developing countries: evidence from Indian SMEs. Production Planning & Control, 23(10-11), 769–788.
Parry, G., & Turner, C. (2006). Application of lean visual process management tools. Production Planning & Control, 17(Janeiro 2006), 77–86. http://doi.org/10.1080/09537280500414991
Patel, N., Chauhan, N., & Trivedi, P. (2015). Benefits of Value Stream Mapping as A Lean Tool Implementation Manufacturing Industries: A Review. IJIRST –International Journal for Innovative Research in Science & Technology, 1(8), 53–57.
Pattanaik, L. N., & Sharma, B. P. (2009). Implementing lean manufacturing with cellular layout: A case study. International Journal of Advanced Manufacturing Technology, 42(7-8), 772–779.
Pekuri, A., Herrala, M., Aapaoja, A., & Haapasalo, H. (2012). Applying Lean in Construction – Cornerstones for Implementation. Proceedings for the 20th Annual Conference of the International Group for Lean Construction.
Pettersen, J. (2009). Defining lean production: some conceptual and practical issues. The TQM Journal, 21(2), 127–142. http://doi.org/10.1108/17542730910938137
Poksinska, B. (2010). The current state of Lean implementation in health care : literature review. Quality Management in Health Care, 19(4), 319–329.
Rajenthirakumar, D., & Thyla, P. (2011). Transformation to lean manufacturing by an automative component manufacturing company. International Journal of Lean Thinking, 2(2), 1–13. Retrieved from http://www.ita.mx/files/gui-ingles-tecnico-nov-2012/ing-industrial-2-11-2012-1.pdf
Ramnath, B. V., Elanchezhian, C., & Kesavan, R. (2010). Application Of Kanban System For Implementing Lean Manufacturing (A Case Study). Journal of Engineering Research and Studies, I(I), 13.
Rose, A. N. M., Md. Deros, B., & Ab. Rahman, M. N. (2013). A study on lean manufacturing implementation in Malaysian automotive component industry. International Journal of Automotive and Mechanical Engineering, 8(1), 1467–1476. http://doi.org/10.15282/ijame.8.2013.33.0121
Roslin, E. N., Shamsuddin, A., & Dawal, S. Z. M. (2014). Discovering Barriers of Lean Manufactur-ing System Implementation in Malaysian Automotive Industry. In Advanced Materials Re-search (Vol. 845, pp. 687-691). Trans Tech Publications.
Sahoo, A. K., Singh, N. K., Shankar, R., & Tiwari, M. K. (2008). Lean philosophy: Implementation in a forging company. International Journal of Advanced Manufacturing Technology, 36(5-6), 451–462.
Satao, S. M., Thampi, D. G. T., Dalvi, S. d., Srinivas, B., & Patil, B. T. (2012). Enhancing Waste Reduction through Lean Manufacturing Tools and Techniques , a Methodical Step in the Territory of Green Manufacturing. IRACST - International Journal of Research in Management & Technology (IJRMT), 2(2), 253–257.
Schwarz, P., Pannes, K. D., Nathan, M., Reimer, H. J., Kleespies, A., Kuhn, N., … Z??gel, N. P. (2011). Lean processes for optimizing or capacity utilization: Prospective analysis before and after implementation of value stream mapping (VSM). Langenbeck’s Archives of Surgery, 396(7), 1047–1053. http://doi.org/10.1007/s00423-011-0833-4
Seyedhosseini, S. M., Taleghani, A. E., Bakhsha, A., & Partovi, S. (2011). Extracting leanness criteria by employing the concept of Balanced Scorecard. Expert Systems with Applications, 38(8), 10454–10461. http://doi.org/10.1016/j.eswa.2011.02.095
Shah, R., & Ward, P. T. (2003). Lean manufacturing: Context, practice bundles, and performance. Journal of Operations Management, 21(2), 129–149.
Singh, B., Garg, S. K., & Sharma, S. K. (2010). Development of index for measuring leanness: study of an Indian auto component industry. Measuring Business Excellence, 14(2), 46–53.
Singh, B., Garg, S. K., Sharma, S. K., & Grewal, C. (2010). Lean implementation and its benefits to production industry. International Journal of Lean Six Sigma, 1(2), 157–168.
Soriano‐Meier, H., & Forrester, P. L. (2002). A model for evaluating the degree of leanness of manufacturing firms. Integrated Manufacturing Systems, 13(2), 104–109.
Stanleigh, M (2008). Effeting successful changemanagment initiatives, Industrial and commercial training, 40, 34-37
Stewart, S., & Adams, M. (1998). The lean manufacturing champion: reducing time and risk by encouraging risk-taking. Strategic Change, 7(6), 357–366.
Storch, R. L. (1999). Improving flow to achieve lean manufacturing in shipbuilding. Production Planning & Control, 10(February 2015), 127–137. http://doi.org/10.1080/095372899233280
Sundar, R., Balaji, A. N., & Satheesh Kumar, R. M. (2014). A review on lean manufacturing implementation techniques. Procedia Engineering, 97, 1875–1885.
Susilawati, A., Tan, J., Bell, D., & Sarwar, M. (2015). Fuzzy logic based method to measure degree of lean activity in manufacturing industry. Journal of Manufacturing Systems, 34(C), 1–11.
Thirunavukkarasu, S., Bheeman, B. V, Ashwin, R., Varadharajan, M., Devadasan, S. R., & Murugesh, R. (2013). Lean implementation through value stream mapping: A case study in an Indian pump manufacturing company. International Journal of Services and Operations Management, 16(4), 506–524. http://doi.org/10.1504/IJSOM.2013.057511
Vamsi, N., Jasti, K., & Kodali, R. (2014). A literature review of empirical research methodology in lean manufacturing. International Journal of Operations & Production Management, 34(10), 1080–1122. http://doi.org/10.1108/IJOPM-04-2012-0169
Vinodh, S., & Balaji, S. R. (2011). Fuzzy logic based leanness assessment and its decision support system. International Journal of Production Research, 49(13), 4027–4041.
Vinodh, S., & Chintha, S. K. (2011a). Application of fuzzy QFD for enabling agility in a manufacturing organization: A case study. The TQM Journal, 23(3), 343–357.
Vinodh, S., & Chintha, S. K. (2011b). Leanness assessment using multi-grade fuzzy approach. International Journal of Production Research, 49(2), 431–445.
Vinodh, S., & Joy, D. (2012). Structural Equation Modelling of lean manufacturing practices. International Journal of Production Research, 50(6), 1598–1607.
Vinodh, S., & Vimal, K. E. K. (2012). Thirty criteria based leanness assessment using fuzzy logic approach. International Journal of Advanced Manufacturing Technology, 60(9-12), 1185–1195.
Vrijhoef, R., & Koskela, L. (2000). The four roles of supply chain management in construction. European Journal of Purchasing & Supply Management, 6(3-4), 169–178.
Wan, H.-D., & Chen, F. F. (2008). A leanness measure of manufacturing systems for quantifying impacts of lean initiatives. International Journal of Production Research, 4623(23), 6567–6584.
Wong, W. P., Ignatius, J., & Soh, K. L. (2012). What is the leanness level of your organisation in lean transformation implementation? An integrated lean index using ANP approach. Production Planning & Control, 25(4), 273–287. http://doi.org/10.1080/09537287.2012.674308
Yang, M. G., Hong, P., & Modi, S. B. (2011). Impact of lean manufacturing and environmental management on business performance: An empirical study of manufacturing firms. International Journal of Production Economics, 129(2), 251–261. http://doi.org/10.1016/j.ijpe.2010.10.017
Yang, T., Hsieh, C.-H., & Cheng, B.-Y. (2011). Lean-pull strategy in a re-entrant manufacturing environment: a pilot study for TFT-LCD array manufacturing. International Journal of Production Research, 49(6), 1511–1529. http://doi.org/10.1080/00207540903567333
Yang, T., Kuo, Y., Su, C. T., & Hou, C. L. (2015). Lean production system design for fishing net manufacturing using lean principles and simulation optimization. Journal of Manufacturing Systems, 34(1), 66–73. http://doi.org/10.1016/j.jmsy.2014.11.010
Yusup, M. Z., Mahmood, W. H. W., Salleh, M. R., & Yusof, A. S. M. (2015). Review the influence of Lean tools and its performance against the index of manufacturing sustainability. International Journal of Agile Systems and Management, 8(2), 116–131.
Zanjirchi, S. M., Tooranlo, H. S., & Nejad, L. Z. (2010). Measuring Organizational Leanness Using Fuzzy Approach. Proceedings of the 2010 International Conference on Industrial Engineering and Operations Management, 144–156.
Zargun, S., & Al-Ashaab, A. (2013). Critical Success Factors for Lean Manufacturing: A Systematic Literature Review an International Comparison between Developing and Developed Countries. Advanced Materials Research, 845, 668–681.