How to cite this paper
Saxena, T & Chawla, V. (2024). Elastic properties evaluation of banana-hemp fiber-based hybrid composite with nano-titanium oxide filler: Analytical and Simulation Study.Engineering Solid Mechanics, 12(1), 65-80.
Refrences
Abaimov, S. G., Khudyakova, A. A., & Lomov, S. V. (2016). On the closed-form expression of the Mori–Tanaka theory prediction for the engineering constants of a unidirectional fiber-reinforced ply. Composite Structures, 142, 1-6.
Aliha, M. R. M., Ameri, M., Mansourian, A., & Ayatollahi, M. R. (2012). Finite element analysis of a new test specimen for investigating mixed mode cracks in asphalt overlays. In 7th RILEM International Conference on Cracking in Pavements: Mechanisms, Modeling, Testing, Detection and Prevention Case Histories (pp. 359-367). Springer Netherlands.
Aliha, M. R. M., Bahmani, A., & Akhondi, S. (2015). Fracture and fatigue analysis for a cracked carabiner using 3D finite element simulations. Strength of Materials, 47, 890-902.
Alvinasab, A. (2009). Nonlocal theory and finite element modeling of nanocomposites. Clarkson University.
Benveniste, Y. (1987). A new approach to the application of Mori-Tanaka's theory in composite materials. Mechanics of materials, 6(2), 147-157.
Bhatia, S., Angra, S., & Khan, S. (2021). A review on the mechanical and tribological characterization of boron carbide reinforced epoxy composite. Advanced Composite Materials, 30(4), 307-337.
Budiansky, B. (1965). On the elastic moduli of some heterogeneous materials. Journal of the Mechanics and Physics of Solids, 13(4), 223-227.
Chawla, V. K., Chhabra, D., Gupta, P., & Naaz, S. (2021). Evaluation of green operations management by fuzzy analytical hierarchy process. Materials Today: Proceedings, 38, 274-279.
Chawla, V. K., Itika, Singh, P., & Singh, S. (2023), A fuzzy Pythagorean TODIM method for sustainable ABC analysis in inventory management. Journal of Future Sustainability, 4(2), 85-100.
Chawla, V., Bhargava, P., & Verma, S. (2021). Design, stimulation, and fabrication of chassis of an FSAE female driven vehicle. Materials Today: Proceedings, 43, 36-41.
Chou, T. W., Nomura, S., & Taya, M. (1980). A self-consistent approach to the elastic stiffness of short-fiber composites. Journal of Composite Materials, 14(3), 178-188.
Dahlen, C., & Springer, G. S. (1994). Delamination growth in composites under cyclic loads. Journal of Composite Materials, 28(8), 732-781.
DeArmitt, C. (2011). Functional fillers for plastics. In Applied plastics engineering handbook (pp. 455-468). William Andrew Publishing.
Dixit, S., & Padhee, S. S. (2019). Finite element analysis of fiber reinforced hybrid composites. Materials Today: Proceedings, 18, 3340-3347.
Essabir, H., Bensalah, M. O., Rodrigue, D., Bouhfid, R., & Qaiss, A. (2016). Structural, mechanical and thermal properties of bio-based hybrid composites from waste coir residues: Fibers and shell particles. Mechanics of Materials, 93, 134-144.
Faghidian, S. A. (2021). Contribution of nonlocal integral elasticity to modified strain gradient theory. The European Physical Journal Plus, 136(5), 559.
Genin, G. M., & Birman, V. (2009). Micromechanics and structural response of functionally graded, particulate-matrix, fiber-reinforced composites. International journal of solids and structures, 46(10), 2136-2150.
Giner, E., Vercher, A., Marco, M., & Arango, C. (2015). Estimation of the reinforcement factor ξ for calculating the transverse stiffness E2 with the Halpin–Tsai equations using the finite element method. Composite Structures, 124, 402-408.
Gupta, P., Chawla, V., Jain, V., & Angra, S. (2022). Green operations management for sustainable development: An explicit analysis by using fuzzy best-worst method. Decision Science Letters, 11(3), 357-366.
Hadden, C. M., Klimek-McDonald, D. R., Pineda, E. J., King, J. A., Reichanadter, A. M., Miskioglu, I., ... & Odegard, G. M. (2015). Mechanical properties of graphene nanoplatelet/carbon fiber/epoxy hybrid composites: Multiscale modeling and experiments. Carbon, 95, 100-112.
Halpin, J. C. (1969). Effects of Environmental Factors on Composite Materials. Air Force Materials Lab Wright-Patterson AFB OH.
Hill, R. (1965). A self-consistent mechanics of composite materials. Journal of the Mechanics and Physics of Solids, 13(4), 213-222.
Kobayashi, S., Takada, K., & Nakamura, R. (2014). Processing and characterization of hemp fiber textile composites with micro-braiding technique. Composites part A: applied science and manufacturing, 59, 1-8.
Kumar, A., Angra, S., & Chanda, A. K. (2020). Analysis of the effects of varying core thicknesses of Kevlar Honeycomb sandwich structures under different regimes of testing. Materials Today: Proceedings, 21, 1615-1623.
Kumar, U., Rathi, R., & Sharma, S. (2020). Carbon nano-tube reinforced nylon 6, 6 composites: a molecular dynamics approach. Engineering Solid Mechanics, 8(4), 389-396.
Li, Z., Wang, X., & Wang, L. (2006). Properties of hemp fiber reinforced concrete composites. Composites part A: applied science and manufacturing, 37(3), 497-505.
Mahesha, C. R., Suprabha, R., Harne, M. S., Galme, S. G., Thorat, S. G., Nagabhooshanam, N., ... & Markos, M. (2022). Nanotitanium Oxide Particles and Jute-Hemp Fiber Hybrid Composites: Evaluate the Mechanical, Water Absorptions, and Morphological Behaviors. Journal of Nanomaterials, 2022.
Mori, T., & Tanaka, K. (1973). Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta metallurgica, 21(5), 571-574.
Ojha, M., Penumakala, P. K., Marrivada, G. V., Chaganti, P. K., & Gupta, A. K. (2019). Processing of glass fiber pultruded composites using graphene nanoplatelets modified epoxy matrix. Materials Today: Proceedings, 18, 3298-3304.
Parashar, S., & Chawla, V. (2023). Kenaf-Coir based hybrid nanocomposite: an analytical and representative volume element analysis. Engineering Solid Mechanics, 11(1), 103-118.
Parashar, S., & Chawla, V. K. (2021). A systematic review on sustainable green fiber reinforced composite and their analytical models. Materials Today: Proceedings, 46, 6541-6546.
Parashar, S., & Chawla, V. K. (2022). Evaluation of fiber volume fraction of kenaf-coir-epoxy based green composite by finite element analysis. Materials Today: Proceedings, 50, 1265-1274.
Parashar, S., & Chawla, V. K. (2022). Evaluation of the effect of Titanium Carbide nanoparticles reinforcement in Kenaf Coir fibre-based Epoxy Hybrid Composites. Neuroquantology, 20(10), 3922-3933.
Parashar, S., & Tomar, P. (2019, February). Synergy of sustainable bio-composite bamboo material in green technology–an explicit report. In Proceedings of International Conference on Sustainable Computing in Science, Technology, and Management (SUSCOM), Amity University Rajasthan, Jaipur-India.
Parashar, S., & Chawla, V.K. (2023). Analysis of the Effect of Hybridization of Coconut Shell Particles on Kenaf-Coir Based Epoxy Hybrid Composites. Energy and Environment Focus, 7(1), 65-76.
Perreault, F., De Faria, A. F., & Elimelech, M. (2015). Environmental applications of graphene-based nanomaterials. Chemical Society Reviews, 44(16), 5861-5896.
Pol, A., Malagi, R., & Munshi, G. (2022). Identification of mechanical properties of an araldite LY556 blended with DNR composite and polyacetal: A comparative study for sustainable future. Journal of Future Sustainability, 2(4), 149-156.
Rafiee, M., Nitzsche, F., & Labrosse, M. R. (2018). Modeling and mechanical analysis of multiscale fiber-reinforced graphene composites: Nonlinear bending, thermal post-buckling, and large amplitude vibration. International Journal of Non-Linear Mechanics, 103, 104-112.
Raghavendra, G., Ojha, S., Acharya, S. K., & Pal, S. K. (2015). Influence of micro/nanofiller alumina on the mechanical behavior of novel hybrid epoxy nanocomposites. High Performance Polymers, 27(3), 342-351.
Ramakrishna, S., Lim, T. C., Inai, R., & Fujihara, K. (2006). Modified Halpin-Tsai equation for clay-reinforced polymer nanofiber. Mechanics of Advanced Materials and Structures, 13(1), 77-81.
Sadjadi, S. (2021). A survey on the effect of plastic pollution in the Great Lakes. Journal of Future Sustainability, 1(1), 5-8.
Sadjadi, S. S., & Ghaderi, S. F. (2023). The role of interest rate and inflation on oil stock prices: Evidence from Ukraine-Russia war. Journal of Industrial and Systems Engineering, (Articles in Press).
Sapuan, S. M., Leenie, A., Harimi, M., & Beng, Y. K. (2006). Mechanical properties of woven banana fibre reinforced epoxy composites. Materials & design, 27(8), 689-693.
Saxena, A., Dwivedi, S. P., Dixit, A., Sharma, S., Srivastava, A. K., & Maurya, N. K. (2021). Computational and experimental investigation on mechanical behavior of zirconia toughened alumina and nickel powder reinforced EN31 based composite material. Materialwissenschaft und Werkstofftechnik, 52(5), 548-560.
Saxena, T., & Chawla, V. K. (2021). Banana leaf fiber-based green composite: An explicit review report. Materials Today: Proceedings, 46, 6618-6624.
Saxena, T., & Chawla, V. K. (2022). Effect of fiber orientations and their weight percentage on banana fiber-based hybrid composite. Materials Today: Proceedings, 50, 1275-1281.
Saxena, T., & Chawla, V. K. (2022). Evaluation of mechanical properties for banana-carbon fiber reinforced nano-clay epoxy composite using analytical modeling and simulation. Research on Engineering Structures and Materials, 8(4), 773-798.
Saxena, T., & Tomar, P. (2019, February). Constitutive Performance Characterization of Diversified Bamboo Material–A Green Technology. In Proceedings of International Conference on Sustainable Computing in Science, Technology and Management (SUSCOM), Amity University Rajasthan, Jaipur-India.
Seretis, G. V., Kouzilos, G., Manolakos, D. E., & Provatidis, C. G. (2017). On the graphene nanoplatelets reinforcement of hand lay-up glass fabric/epoxy laminated composites. Composites Part B: Engineering, 118, 26-32.
Seshanandan, G., Ravindran, D., & Sornakumar, T. (2016). Mechanical properties of nano titanium oxide particles-hybrid jute-glass FRP composites. Materials Today: Proceedings, 3(6), 1383-1388.
Singh, S., & Angra, S. (2018). Flexural and impact properties of stainless steel based glass fibre reinforced fibre metal laminate under hygrothermal conditioning. International Journal of Engineering, 31(1), 164-172.
Tekletsadik, S. (2023). Selection of best leather item using a FAHP method to launch new leather industry in Ethiopia: A case study. Journal of Future Sustainability, 3(2), 85-96.
Thwe, M. M., & Liao, K. (2002). Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites. Composites Part A: Applied Science and Manufacturing, 33(1), 43-52.
Tsai, S. W., & Hahn, H. T. (2018). Introduction to composite materials. Routledge.
Van Loan, C. F., & Golub, G. (1996). Matrix computations (Johns Hopkins studies in mathematical sciences). Matrix Computations, 53.
Wang, H. (2002). Design and optimisation of chemical and mechanical processing of hemp for rotor spinning and textile applications (Doctoral dissertation, UNSW Sydney).
Wang, H. M., Postle, R., Kessler, R. W., & Kessler, W. (2001). Adaptive processing of Australia hemp for short fibre spinning. Bast fibrous plants on the turn of second and third millennium, Shenyang, China.
Wang, Y., & Huang, Z. (2017). A review of analytical micromechanics models on composite elastoplastic behaviour. Procedia engineering, 173, 1283-1290.
Yadav, E., & Chawla, V. K. (2022). An explicit literature review on bearing materials and their defect detection techniques. Materials Today: Proceedings, 50, 1637-1643.
Younes, R., Hallal, A., Fardoun, F., & Chehade, F. H. (2012). Comparative review study on elastic properties modeling for unidirectional composite materials. Composites and their properties, 17, 391-408.
Yung, K. C., Wang, J., & Yue, T. M. (2006). Modeling Young's modulus of polymer-layered silicate nanocomposites using a modified Halpin—Tsai micromechanical model. Journal of reinforced plastics and composites, 25(8), 847-861.
Zweben, C. (1977). Tensile strength of hybrid composites. Journal of materials science, 12, 1325-1337.
Aliha, M. R. M., Ameri, M., Mansourian, A., & Ayatollahi, M. R. (2012). Finite element analysis of a new test specimen for investigating mixed mode cracks in asphalt overlays. In 7th RILEM International Conference on Cracking in Pavements: Mechanisms, Modeling, Testing, Detection and Prevention Case Histories (pp. 359-367). Springer Netherlands.
Aliha, M. R. M., Bahmani, A., & Akhondi, S. (2015). Fracture and fatigue analysis for a cracked carabiner using 3D finite element simulations. Strength of Materials, 47, 890-902.
Alvinasab, A. (2009). Nonlocal theory and finite element modeling of nanocomposites. Clarkson University.
Benveniste, Y. (1987). A new approach to the application of Mori-Tanaka's theory in composite materials. Mechanics of materials, 6(2), 147-157.
Bhatia, S., Angra, S., & Khan, S. (2021). A review on the mechanical and tribological characterization of boron carbide reinforced epoxy composite. Advanced Composite Materials, 30(4), 307-337.
Budiansky, B. (1965). On the elastic moduli of some heterogeneous materials. Journal of the Mechanics and Physics of Solids, 13(4), 223-227.
Chawla, V. K., Chhabra, D., Gupta, P., & Naaz, S. (2021). Evaluation of green operations management by fuzzy analytical hierarchy process. Materials Today: Proceedings, 38, 274-279.
Chawla, V. K., Itika, Singh, P., & Singh, S. (2023), A fuzzy Pythagorean TODIM method for sustainable ABC analysis in inventory management. Journal of Future Sustainability, 4(2), 85-100.
Chawla, V., Bhargava, P., & Verma, S. (2021). Design, stimulation, and fabrication of chassis of an FSAE female driven vehicle. Materials Today: Proceedings, 43, 36-41.
Chou, T. W., Nomura, S., & Taya, M. (1980). A self-consistent approach to the elastic stiffness of short-fiber composites. Journal of Composite Materials, 14(3), 178-188.
Dahlen, C., & Springer, G. S. (1994). Delamination growth in composites under cyclic loads. Journal of Composite Materials, 28(8), 732-781.
DeArmitt, C. (2011). Functional fillers for plastics. In Applied plastics engineering handbook (pp. 455-468). William Andrew Publishing.
Dixit, S., & Padhee, S. S. (2019). Finite element analysis of fiber reinforced hybrid composites. Materials Today: Proceedings, 18, 3340-3347.
Essabir, H., Bensalah, M. O., Rodrigue, D., Bouhfid, R., & Qaiss, A. (2016). Structural, mechanical and thermal properties of bio-based hybrid composites from waste coir residues: Fibers and shell particles. Mechanics of Materials, 93, 134-144.
Faghidian, S. A. (2021). Contribution of nonlocal integral elasticity to modified strain gradient theory. The European Physical Journal Plus, 136(5), 559.
Genin, G. M., & Birman, V. (2009). Micromechanics and structural response of functionally graded, particulate-matrix, fiber-reinforced composites. International journal of solids and structures, 46(10), 2136-2150.
Giner, E., Vercher, A., Marco, M., & Arango, C. (2015). Estimation of the reinforcement factor ξ for calculating the transverse stiffness E2 with the Halpin–Tsai equations using the finite element method. Composite Structures, 124, 402-408.
Gupta, P., Chawla, V., Jain, V., & Angra, S. (2022). Green operations management for sustainable development: An explicit analysis by using fuzzy best-worst method. Decision Science Letters, 11(3), 357-366.
Hadden, C. M., Klimek-McDonald, D. R., Pineda, E. J., King, J. A., Reichanadter, A. M., Miskioglu, I., ... & Odegard, G. M. (2015). Mechanical properties of graphene nanoplatelet/carbon fiber/epoxy hybrid composites: Multiscale modeling and experiments. Carbon, 95, 100-112.
Halpin, J. C. (1969). Effects of Environmental Factors on Composite Materials. Air Force Materials Lab Wright-Patterson AFB OH.
Hill, R. (1965). A self-consistent mechanics of composite materials. Journal of the Mechanics and Physics of Solids, 13(4), 213-222.
Kobayashi, S., Takada, K., & Nakamura, R. (2014). Processing and characterization of hemp fiber textile composites with micro-braiding technique. Composites part A: applied science and manufacturing, 59, 1-8.
Kumar, A., Angra, S., & Chanda, A. K. (2020). Analysis of the effects of varying core thicknesses of Kevlar Honeycomb sandwich structures under different regimes of testing. Materials Today: Proceedings, 21, 1615-1623.
Kumar, U., Rathi, R., & Sharma, S. (2020). Carbon nano-tube reinforced nylon 6, 6 composites: a molecular dynamics approach. Engineering Solid Mechanics, 8(4), 389-396.
Li, Z., Wang, X., & Wang, L. (2006). Properties of hemp fiber reinforced concrete composites. Composites part A: applied science and manufacturing, 37(3), 497-505.
Mahesha, C. R., Suprabha, R., Harne, M. S., Galme, S. G., Thorat, S. G., Nagabhooshanam, N., ... & Markos, M. (2022). Nanotitanium Oxide Particles and Jute-Hemp Fiber Hybrid Composites: Evaluate the Mechanical, Water Absorptions, and Morphological Behaviors. Journal of Nanomaterials, 2022.
Mori, T., & Tanaka, K. (1973). Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta metallurgica, 21(5), 571-574.
Ojha, M., Penumakala, P. K., Marrivada, G. V., Chaganti, P. K., & Gupta, A. K. (2019). Processing of glass fiber pultruded composites using graphene nanoplatelets modified epoxy matrix. Materials Today: Proceedings, 18, 3298-3304.
Parashar, S., & Chawla, V. (2023). Kenaf-Coir based hybrid nanocomposite: an analytical and representative volume element analysis. Engineering Solid Mechanics, 11(1), 103-118.
Parashar, S., & Chawla, V. K. (2021). A systematic review on sustainable green fiber reinforced composite and their analytical models. Materials Today: Proceedings, 46, 6541-6546.
Parashar, S., & Chawla, V. K. (2022). Evaluation of fiber volume fraction of kenaf-coir-epoxy based green composite by finite element analysis. Materials Today: Proceedings, 50, 1265-1274.
Parashar, S., & Chawla, V. K. (2022). Evaluation of the effect of Titanium Carbide nanoparticles reinforcement in Kenaf Coir fibre-based Epoxy Hybrid Composites. Neuroquantology, 20(10), 3922-3933.
Parashar, S., & Tomar, P. (2019, February). Synergy of sustainable bio-composite bamboo material in green technology–an explicit report. In Proceedings of International Conference on Sustainable Computing in Science, Technology, and Management (SUSCOM), Amity University Rajasthan, Jaipur-India.
Parashar, S., & Chawla, V.K. (2023). Analysis of the Effect of Hybridization of Coconut Shell Particles on Kenaf-Coir Based Epoxy Hybrid Composites. Energy and Environment Focus, 7(1), 65-76.
Perreault, F., De Faria, A. F., & Elimelech, M. (2015). Environmental applications of graphene-based nanomaterials. Chemical Society Reviews, 44(16), 5861-5896.
Pol, A., Malagi, R., & Munshi, G. (2022). Identification of mechanical properties of an araldite LY556 blended with DNR composite and polyacetal: A comparative study for sustainable future. Journal of Future Sustainability, 2(4), 149-156.
Rafiee, M., Nitzsche, F., & Labrosse, M. R. (2018). Modeling and mechanical analysis of multiscale fiber-reinforced graphene composites: Nonlinear bending, thermal post-buckling, and large amplitude vibration. International Journal of Non-Linear Mechanics, 103, 104-112.
Raghavendra, G., Ojha, S., Acharya, S. K., & Pal, S. K. (2015). Influence of micro/nanofiller alumina on the mechanical behavior of novel hybrid epoxy nanocomposites. High Performance Polymers, 27(3), 342-351.
Ramakrishna, S., Lim, T. C., Inai, R., & Fujihara, K. (2006). Modified Halpin-Tsai equation for clay-reinforced polymer nanofiber. Mechanics of Advanced Materials and Structures, 13(1), 77-81.
Sadjadi, S. (2021). A survey on the effect of plastic pollution in the Great Lakes. Journal of Future Sustainability, 1(1), 5-8.
Sadjadi, S. S., & Ghaderi, S. F. (2023). The role of interest rate and inflation on oil stock prices: Evidence from Ukraine-Russia war. Journal of Industrial and Systems Engineering, (Articles in Press).
Sapuan, S. M., Leenie, A., Harimi, M., & Beng, Y. K. (2006). Mechanical properties of woven banana fibre reinforced epoxy composites. Materials & design, 27(8), 689-693.
Saxena, A., Dwivedi, S. P., Dixit, A., Sharma, S., Srivastava, A. K., & Maurya, N. K. (2021). Computational and experimental investigation on mechanical behavior of zirconia toughened alumina and nickel powder reinforced EN31 based composite material. Materialwissenschaft und Werkstofftechnik, 52(5), 548-560.
Saxena, T., & Chawla, V. K. (2021). Banana leaf fiber-based green composite: An explicit review report. Materials Today: Proceedings, 46, 6618-6624.
Saxena, T., & Chawla, V. K. (2022). Effect of fiber orientations and their weight percentage on banana fiber-based hybrid composite. Materials Today: Proceedings, 50, 1275-1281.
Saxena, T., & Chawla, V. K. (2022). Evaluation of mechanical properties for banana-carbon fiber reinforced nano-clay epoxy composite using analytical modeling and simulation. Research on Engineering Structures and Materials, 8(4), 773-798.
Saxena, T., & Tomar, P. (2019, February). Constitutive Performance Characterization of Diversified Bamboo Material–A Green Technology. In Proceedings of International Conference on Sustainable Computing in Science, Technology and Management (SUSCOM), Amity University Rajasthan, Jaipur-India.
Seretis, G. V., Kouzilos, G., Manolakos, D. E., & Provatidis, C. G. (2017). On the graphene nanoplatelets reinforcement of hand lay-up glass fabric/epoxy laminated composites. Composites Part B: Engineering, 118, 26-32.
Seshanandan, G., Ravindran, D., & Sornakumar, T. (2016). Mechanical properties of nano titanium oxide particles-hybrid jute-glass FRP composites. Materials Today: Proceedings, 3(6), 1383-1388.
Singh, S., & Angra, S. (2018). Flexural and impact properties of stainless steel based glass fibre reinforced fibre metal laminate under hygrothermal conditioning. International Journal of Engineering, 31(1), 164-172.
Tekletsadik, S. (2023). Selection of best leather item using a FAHP method to launch new leather industry in Ethiopia: A case study. Journal of Future Sustainability, 3(2), 85-96.
Thwe, M. M., & Liao, K. (2002). Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites. Composites Part A: Applied Science and Manufacturing, 33(1), 43-52.
Tsai, S. W., & Hahn, H. T. (2018). Introduction to composite materials. Routledge.
Van Loan, C. F., & Golub, G. (1996). Matrix computations (Johns Hopkins studies in mathematical sciences). Matrix Computations, 53.
Wang, H. (2002). Design and optimisation of chemical and mechanical processing of hemp for rotor spinning and textile applications (Doctoral dissertation, UNSW Sydney).
Wang, H. M., Postle, R., Kessler, R. W., & Kessler, W. (2001). Adaptive processing of Australia hemp for short fibre spinning. Bast fibrous plants on the turn of second and third millennium, Shenyang, China.
Wang, Y., & Huang, Z. (2017). A review of analytical micromechanics models on composite elastoplastic behaviour. Procedia engineering, 173, 1283-1290.
Yadav, E., & Chawla, V. K. (2022). An explicit literature review on bearing materials and their defect detection techniques. Materials Today: Proceedings, 50, 1637-1643.
Younes, R., Hallal, A., Fardoun, F., & Chehade, F. H. (2012). Comparative review study on elastic properties modeling for unidirectional composite materials. Composites and their properties, 17, 391-408.
Yung, K. C., Wang, J., & Yue, T. M. (2006). Modeling Young's modulus of polymer-layered silicate nanocomposites using a modified Halpin—Tsai micromechanical model. Journal of reinforced plastics and composites, 25(8), 847-861.
Zweben, C. (1977). Tensile strength of hybrid composites. Journal of materials science, 12, 1325-1337.