2
How to cite this paper
APA: Shahraki, S., Ghanbari, B & Abdollahi, H. (2020). Sub-microcrystalline Al achieved by various procedures of constrained groove pressing: microstructure and mechanical properties. Engineering Solid Mechanics, 8(2), 93-104.
Chicago/Turabian: Shahraki, S., Ghanbari, B & Abdollahi, H. 2020. "Sub-microcrystalline Al achieved by various procedures of constrained groove pressing: microstructure and mechanical properties." Engineering Solid Mechanics 8, no. 2 (2020): 93-104.
AMA: Shahraki, S., Ghanbari, B & Abdollahi, H. Sub-microcrystalline Al achieved by various procedures of constrained groove pressing: microstructure and mechanical properties. Engineering Solid Mechanics. 2020;8(2):93-104.
References
Alexander, D. J. (2007). New methods for severe plastic deformation processing. Journal of Materials Engineering and Performance, 16(3), 360-374.
Azushima, A., Kopp, R., Korhonen, A., Yang, D. Y., Micari, F., Lahoti, G. D., ... & Yanagida, A. (2008). Severe plastic deformation (SPD) processes for metals. CIRP Annals, 57(2), 716-735.
Borhani, M., & Djavanroodi, F. (2012). Rubber pad-constrained groove pressing process: Experimental and finite element investigation. Materials Science and Engineering: A, 546, 1-7
Dieter, G. E., & Bacon, D. J. (1986). Mechanical metallurgy (Vol. 3). New York: McGraw-hill.
Dong, X. L., Yun, B., & Ma, Z. H. (2011). Grain refinement in constrained groove pressing of 7050 Aluminum alloy. In Advanced Materials Research (Vol. 189, pp. 2823-2826). Trans Tech Publications.
Estrin, Y., Molotnikov, A., Davies, C. H. J., & Lapovok, R. (2008). Strain gradient plasticity modelling of high-pressure torsion. Journal of the Mechanics and Physics of Solids, 56(4), 1186-1202
Hosseini, E., Kazeminezhad, M., Mani, A., & Rafizadeh, E. (2009). On the evolution of flow stress during constrained groove pressing of pure copper sheet. Computational Materials Science, 45(4), 855-859.
Hosseini, E., & Kazeminezhad, M. (2009). Retracted: Nanostructure and mechanical properties of 0–7 strained aluminum by CGP: XRD, TEM and tensile test.
Huang, J., Zhu, Y. T., Alexander, D. J., Liao, X., Lowe, T. C., & Asaro, R. J. (2004). Development of repetitive corrugation and straightening. Materials Science and Engineering: A, 371(1-2), 35-39.
Khodabakhshi, F., Kazeminezhad, M., & Kokabi, A. H. (2010). Constrained groove pressing of low carbon steel: Nano-structure and mechanical properties. Materials Science and Engineering: A, 527(16-17), 4043-4049.
Khodabakhshi, F., & Kazeminezhad, M. (2011). The effect of constrained groove pressing on grain size, dislocation density and electrical resistivity of low carbon steel. Materials & Design, 32(6), 3280-3286.
Krishnaiah, A., Chakkingal, U., & Venugopal, P. (2005). Production of ultrafine grain sizes in aluminium sheets by severe plastic deformation using the technique of groove pressing. Scripta Materialia, 52(12), 1229-1233.
Kumar, S. S., & Raghu, T. (2011). Tensile behaviour and strain hardening characteristics of constrained groove pressed nickel sheets. Materials & Design, 32(8-9), 4650-4657.
Kumar, S. S., & Raghu, T. (2013). Mechanical behaviour and microstructural evolution of constrained groove pressed nickel sheets. Journal of Materials Processing Technology, 213(2), 214-220.
Ma, E. (2006). Eight routes to improve the tensile ductility of bulk nanostructured metals and alloys. Jom, 58(4), 49-53.
Meyers, M. A., Mishra, A., & Benson, D. J. (2006). Mechanical properties of nanocrystalline materials. Progress in Materials Science, 51(4), 427-556
Mukherjee, P., Sarkar, A., Barat, P., Bandyopadhyay, S. K., Sen, P., Chattopadhyay, S. K., ... & Mitra, M. K. (2004). Deformation characteristics of rolled zirconium alloys: a study by X-ray diffraction line profile analysis. Acta materialia, 52(19), 5687-5696.
Park, K. T., & Shin, D. H. (2002). Microstructural interpretation of negligible strain-hardening behavior of submicrometer-grained low-carbon steel during tensile deformation. Metallurgical and Materials Transactions A, 33(3), 705-70
Rafizadeh, E., Mani, A., & Kazeminezhad, M. (2009). The effects of intermediate and post-annealing phenomena on the mechanical properties and microstructure of constrained groove pressed copper sheet. Materials Science and Engineering: A, 515(1-2), 162-168.
Roters, F., Raabe, D., & Gottstein, G. (2000). Work hardening in heterogeneous alloys—a microstructural approach based on three internal state variables. Acta materialia, 48(17), 4181-4189.
Saito, Y., Utsunomiya, H., Tsuji, N., & Sakai, T. (1999). Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process. Acta materialia, 47(2), 579-583
Schafler, E., Zehetbauer, M., & Ungar, T. (2001). Measurement of screw and edge dislocation density by means of X-ray Bragg profile analysis. Materials Science and Engineering: A, 319, 220-223.
Shin, D. H., Park, J. J., Kim, Y. S., & Park, K. T. (2002). Constrained groove pressing and its application to grain refinement of aluminum. materials Science and Engineering: A, 328(1-2), 98-103.
Valiev, R. Z., Estrin, Y., Horita, Z., Langdon, T. G., Zechetbauer, M. J., & Zhu, Y. T. (2006). Producing bulk ultrafine-grained materials by severe plastic deformation. Jom, 58(4), 33-39.
Williamson, G. K., & Hall, W. H. (1953). X-ray line broadening from filed aluminium and wolfram. Acta Metallurgica, 1(1), 22-31
Xing, Z. P., Kang, S. B., & Kim, H. W. (2002). Structure and properties of AA3003 alloy produced by accumulative roll bonding process. Journal of Materials Science, 37(4), 717-722.
Zhang, Z., Zhou, F., & Lavernia, E. J. (2003). On the analysis of grain size in bulk nanocrystalline materials via X-ray diffraction. Metallurgical and Materials Transactions A, 34(6), 1349-1355.
Zhao, Y., Topping, T., Bingert, J. F., Thornton, J. J., Dangelewicz, A. M., Li, Y., ... & Lavernia, E. J. (2008). High tensile ductility and strength in bulk nanostructured nickel. Advanced Materials, 20(16), 3028-3033
Zhao, Y., Zhu, Y., & Lavernia, E. J. (2010). Strategies for improving tensile ductility of bulk nanostructured materials. Advanced Engineering Materials, 12(8), 769-778.
Zherebtsov, S., Kudryavtsev, E., Kostjuchenko, S., Malysheva, S., & Salishchev, G. (2012). Strength and ductility-related properties of ultrafine grained two-phase titanium alloy produced by warm multiaxial forging. Materials Science and Engineering: A, 536, 190-196.
Azushima, A., Kopp, R., Korhonen, A., Yang, D. Y., Micari, F., Lahoti, G. D., ... & Yanagida, A. (2008). Severe plastic deformation (SPD) processes for metals. CIRP Annals, 57(2), 716-735.
Borhani, M., & Djavanroodi, F. (2012). Rubber pad-constrained groove pressing process: Experimental and finite element investigation. Materials Science and Engineering: A, 546, 1-7
Dieter, G. E., & Bacon, D. J. (1986). Mechanical metallurgy (Vol. 3). New York: McGraw-hill.
Dong, X. L., Yun, B., & Ma, Z. H. (2011). Grain refinement in constrained groove pressing of 7050 Aluminum alloy. In Advanced Materials Research (Vol. 189, pp. 2823-2826). Trans Tech Publications.
Estrin, Y., Molotnikov, A., Davies, C. H. J., & Lapovok, R. (2008). Strain gradient plasticity modelling of high-pressure torsion. Journal of the Mechanics and Physics of Solids, 56(4), 1186-1202
Hosseini, E., Kazeminezhad, M., Mani, A., & Rafizadeh, E. (2009). On the evolution of flow stress during constrained groove pressing of pure copper sheet. Computational Materials Science, 45(4), 855-859.
Hosseini, E., & Kazeminezhad, M. (2009). Retracted: Nanostructure and mechanical properties of 0–7 strained aluminum by CGP: XRD, TEM and tensile test.
Huang, J., Zhu, Y. T., Alexander, D. J., Liao, X., Lowe, T. C., & Asaro, R. J. (2004). Development of repetitive corrugation and straightening. Materials Science and Engineering: A, 371(1-2), 35-39.
Khodabakhshi, F., Kazeminezhad, M., & Kokabi, A. H. (2010). Constrained groove pressing of low carbon steel: Nano-structure and mechanical properties. Materials Science and Engineering: A, 527(16-17), 4043-4049.
Khodabakhshi, F., & Kazeminezhad, M. (2011). The effect of constrained groove pressing on grain size, dislocation density and electrical resistivity of low carbon steel. Materials & Design, 32(6), 3280-3286.
Krishnaiah, A., Chakkingal, U., & Venugopal, P. (2005). Production of ultrafine grain sizes in aluminium sheets by severe plastic deformation using the technique of groove pressing. Scripta Materialia, 52(12), 1229-1233.
Kumar, S. S., & Raghu, T. (2011). Tensile behaviour and strain hardening characteristics of constrained groove pressed nickel sheets. Materials & Design, 32(8-9), 4650-4657.
Kumar, S. S., & Raghu, T. (2013). Mechanical behaviour and microstructural evolution of constrained groove pressed nickel sheets. Journal of Materials Processing Technology, 213(2), 214-220.
Ma, E. (2006). Eight routes to improve the tensile ductility of bulk nanostructured metals and alloys. Jom, 58(4), 49-53.
Meyers, M. A., Mishra, A., & Benson, D. J. (2006). Mechanical properties of nanocrystalline materials. Progress in Materials Science, 51(4), 427-556
Mukherjee, P., Sarkar, A., Barat, P., Bandyopadhyay, S. K., Sen, P., Chattopadhyay, S. K., ... & Mitra, M. K. (2004). Deformation characteristics of rolled zirconium alloys: a study by X-ray diffraction line profile analysis. Acta materialia, 52(19), 5687-5696.
Park, K. T., & Shin, D. H. (2002). Microstructural interpretation of negligible strain-hardening behavior of submicrometer-grained low-carbon steel during tensile deformation. Metallurgical and Materials Transactions A, 33(3), 705-70
Rafizadeh, E., Mani, A., & Kazeminezhad, M. (2009). The effects of intermediate and post-annealing phenomena on the mechanical properties and microstructure of constrained groove pressed copper sheet. Materials Science and Engineering: A, 515(1-2), 162-168.
Roters, F., Raabe, D., & Gottstein, G. (2000). Work hardening in heterogeneous alloys—a microstructural approach based on three internal state variables. Acta materialia, 48(17), 4181-4189.
Saito, Y., Utsunomiya, H., Tsuji, N., & Sakai, T. (1999). Novel ultra-high straining process for bulk materials—development of the accumulative roll-bonding (ARB) process. Acta materialia, 47(2), 579-583
Schafler, E., Zehetbauer, M., & Ungar, T. (2001). Measurement of screw and edge dislocation density by means of X-ray Bragg profile analysis. Materials Science and Engineering: A, 319, 220-223.
Shin, D. H., Park, J. J., Kim, Y. S., & Park, K. T. (2002). Constrained groove pressing and its application to grain refinement of aluminum. materials Science and Engineering: A, 328(1-2), 98-103.
Valiev, R. Z., Estrin, Y., Horita, Z., Langdon, T. G., Zechetbauer, M. J., & Zhu, Y. T. (2006). Producing bulk ultrafine-grained materials by severe plastic deformation. Jom, 58(4), 33-39.
Williamson, G. K., & Hall, W. H. (1953). X-ray line broadening from filed aluminium and wolfram. Acta Metallurgica, 1(1), 22-31
Xing, Z. P., Kang, S. B., & Kim, H. W. (2002). Structure and properties of AA3003 alloy produced by accumulative roll bonding process. Journal of Materials Science, 37(4), 717-722.
Zhang, Z., Zhou, F., & Lavernia, E. J. (2003). On the analysis of grain size in bulk nanocrystalline materials via X-ray diffraction. Metallurgical and Materials Transactions A, 34(6), 1349-1355.
Zhao, Y., Topping, T., Bingert, J. F., Thornton, J. J., Dangelewicz, A. M., Li, Y., ... & Lavernia, E. J. (2008). High tensile ductility and strength in bulk nanostructured nickel. Advanced Materials, 20(16), 3028-3033
Zhao, Y., Zhu, Y., & Lavernia, E. J. (2010). Strategies for improving tensile ductility of bulk nanostructured materials. Advanced Engineering Materials, 12(8), 769-778.
Zherebtsov, S., Kudryavtsev, E., Kostjuchenko, S., Malysheva, S., & Salishchev, G. (2012). Strength and ductility-related properties of ultrafine grained two-phase titanium alloy produced by warm multiaxial forging. Materials Science and Engineering: A, 536, 190-196.