How to cite this paper
Mirsayar, M., Shi, X & Zollinger, D. (2017). Evaluation of interfacial bond strength between Portland cement concrete and asphalt concrete layers using bi-material SCB test specimen.Engineering Solid Mechanics, 5(4), 293-306.
Refrences
Abd-Elhady, A. (2013). Mixed mode I/II stress intensity factors through the thickness of disc type specimens. Engineering Solid Mechanics, 1(4), 119-128.
Al-Hdabi, A., Al Nageim, H., & Seton, L. (2014). Performance of gap graded cold asphalt containing cement treated filler. Construction and Building Materials, 69, 362-369.
Alhasan, A. A. (2013). Low Temperature Characterization of Foamed Warm Mix Asphalt (Doctoral dissertation, University of Akron).
Aliha, M. R. M., Ayatollahi, M. R., & Pakzad, R. (2008). Brittle fracture analysis using a ring-shape specimen containing two angled cracks. International Journal of Fracture, 153(1), 63.
Aliha, M. R. M., Ayatollahi, M. R., & Kharazi, B. (2009). Numerical and Experimental Investigations of Mixed Mode Fracture in Granite Using Four-Point-Bend Specimen. Damage and fracture mechanics, 275-283.
Aliha, M. R. M., Heidari-Rarani, M., Shokrieh, M. M., & Ayatollahi, M. R. (2012). Experimental determination of tensile strength and K (IC) of polymer concretes using semi-circular bend(SCB) specimens. Structural Engineering and Mechanics, 43(6), 823-833.
Aliha, M. R. M., & Ayatollahi, M. R. (2013). Two-parameter fracture analysis of SCB rock specimen under mixed mode loading. Engineering Fracture Mechanics, 103, 115-123.
Aliha, M. M., Behbahani, H., Fazaeli, H., & Rezaifar, M. H. (2014). Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures. Construction and Building Materials, 54, 623-635.
Aliha, M. R. M., Fazaeli, H., Aghajani, S., & Nejad, F. M. (2015a). Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures. Construction and Building Materials, 95, 545-555.
Aliha, M. R. M., Bahmani, A., & Akhondi, S. (2015b). Determination of mode III fracture toughness for different materials using a new designed test configuration. Materials & Design, 86, 863-871.
Aliha, M. R. M., Bahmani, A., & Akhondi, S. (2015c). Numerical analysis of a new mixed mode I/III fracture test specimen. Engineering Fracture Mechanics, 134, 95-110.
Aliha, M. R. M., & Bahmani, A. (2017). Rock Fracture Toughness Study Under Mixed Mode I/III Loading. Rock Mechanics and Rock Engineering, 50(7), 1739-1751.
Aliha, M. R. M., & Fattahi Amirdehi, H. R. (2017). Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents. Fatigue & Fracture of Engineering Materials & Structures, 40(1), 55-68.
Ambati, M., Gerasimov, T., & De Lorenzis, L. (2015). A review on phase-field models of brittle fracture and a new fast hybrid formulation. Computational Mechanics, 55(2), 383-405.
Ameri, M., Mansourian, A., Pirmohammad, S., Aliha, M. R. M., & Ayatollahi, M. R. (2012). Mixed mode fracture resistance of asphalt concrete mixtures. Engineering Fracture Mechanics, 93, 153-167.
Ameri, M., Nowbakht, S., Molayem, M., & Aliha, M. R. M. (2016). Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes. Fatigue & fracture of engineering materials & structures, 39(7), 896-906.
Arabi, H., Mirsayar, M. M., Samaei, A. T., & Darandeh, M. (2013). Study of characteristic equation of the elastic stress field near bimaterial notches. Strength of Materials, 45(5), 598-606.
Awaji, H., & Sato. S. (1978). Combined mode fracture toughness measurement by the disc test. Journal of Engineering Materials and Technology, 100, 175–182.
Ayatollahi, M. R., Mirsayar, M. M., & Nejati, M. (2010a). Evaluation of first non-singular stress term in bi-material notches. Computational Materials Science, 50(2), 752-760.
Ayatollahi, M. R., Nejati, M., & Mirsayar, M. M. (2010b). An overdeterministic method for stress analysis of bi-material corners and interface cracks using finite element method. In Proceedings of the 9th Conference of Iranian Aerospace Society, Tehran, Iran.
Ayatollahi, M. R., & Mirsayar, M. M. (2011). Kinking angles for interface cracks. Procedia Engineering, 10, 325-329.
Ayatollahi, M. R., Mirsayar, M. M., & Dehghany, M. (2011). Experimental determination of stress field parameters in bi-material notches using photoelasticity. Materials & Design, 32(10), 4901-4908.
Ayatollahi, M.R., Aliha, M.R.M., & Hasani, M.M. (2006). Mixed mode brittle fracture in PMMA – an experimental study using SCB specimens. Materials Science and Engineering A, 417(12), 348–356.
Ayatollahi, M. R., Dehghany, M., & Mirsayar, M. M. (2013). A comprehensive photoelastic study for mode I sharp V-notches. European Journal of Mechanics-A/Solids, 37, 216-230.
Bahmani, A., Aliha, M. R. M., & Berto, F. (2017). Investigation of fracture toughness for a polycrystalline graphite under combined tensile-tear deformation. Theoretical and Applied Fracture Mechanics. https://doi.org/10.1016/j.tafmec.2017.02.011
Chandra Kishen, J.M., & Singh, K.D. (2001). Stress intensity factors based fracture criteria for kinking and branching of interface crack: application to dams. Engineering Fracture Mechanics, 68(2), 201-219.
Charalambides, P. G., Lund, J., Evans, A. G., & McMeeking, R. M. (1989). A test specimen for determining the fracture resistance of bimaterial interfaces. Journal of Applied Mechanics, 56(1), 77-82.
Chaudhuri, R.A., & Chiu, S.H.J. (2007). Three-dimensional asymptotic stress field at the front of an unsymmetric bimaterial wedge associated with matrix cracking or fiber break. Composite Structures, 78(2), 254–263.
Choupani, N. (2008). Mixed-mode cohesive fracture of adhesive joints: experimental and numerical studies. Engineering fracture mechanics, 75(15), 4363-4382.
Dehghany, M., Saeidi Googarchin, H., & Aliha, M. R. M. (2017). The role of first non‐singular stress terms in mixed mode brittle fracture of V‐notched components: an experimental study. Fatigue & Fracture of Engineering Materials & Structures, 40(4), 623-641.
Dunn, M. L., Cunningham, S. J., & Labossiere, P. E. (2000). Initiation toughness of silicon/glass anodic bonds. Acta Materialia, 48(3), 735-744.
Erdogan, F., & Sih, G. C. (1963). On the crack extension in plates under plane loading and transverse shear. Journal of Basic Engineering, 85, 525–527.
Evans, A. G., Dalgleish, B. J., He, M., & Hutchinson, J. W. (1989). On crack path selection and the interface fracture energy in bimaterial systems. Acta Metallurgica, 37(12), 3249-3254.
Fakhri, M., Amoosoltani, E., & Aliha, M. R. M. (2017). Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber. Engineering Fracture Mechanics, 180, 43-59.
Fett, T., Gerteisen, G., Hahnenberger, S., Martin, G., & Munz, D. (1995). Fracture tests for ceramics under mode-I, mode-II and mixed-mode loading. Journal of the European Ceramic Society, 15, 307–312.
Heidari-Rarani, M., Aliha, M. R. M., Shokrieh, M. M., & Ayatollahi, M. R. (2014). Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings–An experimental study. Construction and Building Materials, 64, 308-315.
Lazzarin, P., & Zambardi, R. (2001). A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches. International journal of fracture, 112(3), 275-298.
Li, X., & Marasteanu, M. O. (2005). Cohesive modeling of fracture in asphalt mixtures at low temperatures. International Journal of Fracture, 136, 285–308.
Lim, I.L., Johnston, I.W., Choi, S.K., & Boland, J.N. (1994). Fracture testing of a soft rock with semi-circular specimens under three-point bending, part 2 – mixed mode. International Journal of Rrock Mechanics and Mining Sciences and Geomechanics Abstracts, 31(3),199–212.
Maiti, S. K., & Smith, R. A. (1983). Comparison of the criteria for mixed mode brittle fracture based on the preinstability stress-strain field Part I: Slit and elliptical cracks under uniaxial tensile loading. International Journal of Fracture, 23(4), 281-295.
Miehe, C., Hofacker, M., Schaenzel, L. M., & Aldakheel, F. (2015). Phase field modeling of fracture in multi-physics problems. Part II. Coupled brittle-to-ductile failure criteria and crack propagation in thermo-elastic–plastic solids. Computer Methods in Applied Mechanics and Engineering, 294, 486-522.
Mirlohi, S., & Aliha, M. (2013). Crack growth path prediction for the angled cracked plate using higher order terms of Williams series expansion. Engineering Solid Mechanics, 1(3), 77-84.
Mirsayar, M. (2013). Calculation of stress intensity factors for an interfacial notch of a bi-material joint using photoelasticity. Engineering Solid Mechanics, 1(4), 149-153.
Mirsayar, M., & Samaei, A. (2013). Photoelastic study of bi-material notches: Effect of mismatch parameters. Engineering Solid Mechanics, 1(1), 21-26.
Mirsayar, M. M. (2014a). On fracture of kinked interface cracks–the role of T-stress. Materials and Design, 61, 117-123.
Mirsayar, M. (2014b). A new mixed mode fracture test specimen covering positive and negative values of T-stress. Engineering Solid Mechanics, 2(2), 67-72.
Mirsayar, M. (2014c). A modified maximum tangential stress criterion for determination of the fracture toughness in bi-material notches–Part 1: Theory. Engineering Solid Mechanics, 2(4), 277-282.
Mirsayar, M., & Samaei, A. (2014). Application of maximum tangential stress criterion in determination of fracture initiation angles of silicon/glass anodic bonds. Engineering Solid Mechanics, 2(3), 145-150.
Mirsayar, M.M., Aliha, M.R.M., & Samaei, A.T. (2014). On fracture initiation angle near bi-material notches – Effect of first non-singular stress term, Engineering Fracture Mechanics, 119, 124 -131.
Mirsayar, M. M. (2015a). Mixed mode fracture analysis using extended maximum tangential strain criterion. Materials & Design, 86, 941-947.
Mirsayar, M. M. (2015b). Three dimensional investigation of mode I stress intensity factor variations in crack front using finite element method. American Journal of Engineering and Applied Sciences, 8(1), 11.
Mirsayar, M. M., & Park. P. (2015). The role of T-stress on kinking angle of interface cracks. Materials and Design, 80, 12-19.
Mirsayar, M., & Samaei, A. (2015). A finite element study on the fracture initiation at the zirconia/veneer interface: An application in dental materials. Engineering Solid Mechanics, 3(4), 207-214.
Mirsayar, M. M., & Park, P. (2016a). Modified maximum tangential stress criterion for fracture behavior of zirconia/veneer interfaces. Journal of the mechanical behavior of biomedical materials, 59, 236-240.
Mirsayar, M. M., & Park, P. (2016b). Mixed mode brittle fracture analysis of high strength cement mortar using strain-based criteria. Theoretical and Applied Fracture Mechanics, 86, 233-238.
Mirsayar, M. M., Berto, F., Aliha, M. R. M., & Park, P. (2016a). Strain-based criteria for mixed-mode fracture of polycrystalline graphite. Engineering Fracture Mechanics, 156, 114-123.
Mirsayar, M. M., Huang, K., & Zollinger, D. G. (2016b). New approach to determining concrete slab lift-off by use of interfacial fracture mechanics concepts. Transportation Research Record: Journal of the Transportation Research Board, 2590, 10-17.
Mirsayar, M., & Takabi, B. (2016). Fracture of underwater notched structures. Engineering Solid Mechanics, 4(2), 43-52.
Mirsayar, M.M. (2017). On fracture analysis of dental restorative materials under combined tensile-shear loading, Theoretical and Applied Fracture Mechanics, doi: http://dx.doi.org/10.1016/j.tafmec. 2017.07.020
Mirsayar, M. M., Joneidi, V. A., Petrescu, R. V. V., Petrescu, F. I. T., & Berto, F. (2017a). Extended MTSN criterion for fracture analysis of soda lime glass. Engineering Fracture Mechanics, 178, 50-59.
Mirsayar, M. M., Razmi, A., & Berto, F. (2017b). Tangential strain‐based criteria for mixed‐mode I/II fracture toughness of cement concrete. Fatigue & Fracture of Engineering Materials & Structures.
Mousavi, A., & Aliha, M. (2016). Determination of fracture parameters for a bi-material center cracked plate subjected to biaxial loading using FEOD method. Engineering Solid Mechanics, 4(3), 117-124.
Razavi, S. M. J., Aliha, M. R. M., & Berto, F. (2017). Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens. Theoretical and Applied Fracture Mechanics.
Razmi, A., & Mirsayar, M. M. (2017). On the mixed mode I/II fracture properties of jute fiber-reinforced concrete. Construction and Building Materials, 148, 512-520.
Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D. Y., & Kennedy, T. W. (1996). Hot mix asphalt materials, mixture design and construction.
Sih, G. C., & Macdonald, B. (1974). Fracture mechanics applied to engineering problems-strain energy density fracture criterion. Engineering Fracture Mechanics, 6(2), 361-386.
Suresh, S., Shih, C.F., Morrone, A., & O-Dowd, N.P. (1990). Mixed-mode fracture toughness of ceramic materials. Journal of the American Ceramic Society, 73(5), 1257–1267.
Theocaris, P.S. (1984). A higher-order approximation for the T criterion of fracture in biaxial fields. Engineering Fracture Mechanics, 19, 975–991.
Wang, H. T., Wang, G. Z., Xuan, F. Z., & Tu, S. T. (2013). An experimental investigation of local fracture resistance and crack growth paths in a dissimilar metal welded joint. Materials and Design, 44, 179-189.
Williams, J.G., & Ewing, P.D. (1972). Fracture under complex stress – the angled crack problem. International Journal of Fracture, 8, 441–446.
Xeidakis, G.S., Samaras, I.S., Zacharopoulos, D.A., & Papakalitakis, G.E. (1996). Crack growth in a mixed-mode loading on marble beams under three point bending. International Journal of Fracture, 79, 197–208.
Yang, Y.Q., Dudek, H.J., & Kumpfert, J. (1998). Interfacial reaction and stability of SCS-6 SiC/Ti–25Al–10NB–3V–1MO composites. Material Science and Engineering A, 246(1-2), 213–220.
Al-Hdabi, A., Al Nageim, H., & Seton, L. (2014). Performance of gap graded cold asphalt containing cement treated filler. Construction and Building Materials, 69, 362-369.
Alhasan, A. A. (2013). Low Temperature Characterization of Foamed Warm Mix Asphalt (Doctoral dissertation, University of Akron).
Aliha, M. R. M., Ayatollahi, M. R., & Pakzad, R. (2008). Brittle fracture analysis using a ring-shape specimen containing two angled cracks. International Journal of Fracture, 153(1), 63.
Aliha, M. R. M., Ayatollahi, M. R., & Kharazi, B. (2009). Numerical and Experimental Investigations of Mixed Mode Fracture in Granite Using Four-Point-Bend Specimen. Damage and fracture mechanics, 275-283.
Aliha, M. R. M., Heidari-Rarani, M., Shokrieh, M. M., & Ayatollahi, M. R. (2012). Experimental determination of tensile strength and K (IC) of polymer concretes using semi-circular bend(SCB) specimens. Structural Engineering and Mechanics, 43(6), 823-833.
Aliha, M. R. M., & Ayatollahi, M. R. (2013). Two-parameter fracture analysis of SCB rock specimen under mixed mode loading. Engineering Fracture Mechanics, 103, 115-123.
Aliha, M. M., Behbahani, H., Fazaeli, H., & Rezaifar, M. H. (2014). Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures. Construction and Building Materials, 54, 623-635.
Aliha, M. R. M., Fazaeli, H., Aghajani, S., & Nejad, F. M. (2015a). Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures. Construction and Building Materials, 95, 545-555.
Aliha, M. R. M., Bahmani, A., & Akhondi, S. (2015b). Determination of mode III fracture toughness for different materials using a new designed test configuration. Materials & Design, 86, 863-871.
Aliha, M. R. M., Bahmani, A., & Akhondi, S. (2015c). Numerical analysis of a new mixed mode I/III fracture test specimen. Engineering Fracture Mechanics, 134, 95-110.
Aliha, M. R. M., & Bahmani, A. (2017). Rock Fracture Toughness Study Under Mixed Mode I/III Loading. Rock Mechanics and Rock Engineering, 50(7), 1739-1751.
Aliha, M. R. M., & Fattahi Amirdehi, H. R. (2017). Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents. Fatigue & Fracture of Engineering Materials & Structures, 40(1), 55-68.
Ambati, M., Gerasimov, T., & De Lorenzis, L. (2015). A review on phase-field models of brittle fracture and a new fast hybrid formulation. Computational Mechanics, 55(2), 383-405.
Ameri, M., Mansourian, A., Pirmohammad, S., Aliha, M. R. M., & Ayatollahi, M. R. (2012). Mixed mode fracture resistance of asphalt concrete mixtures. Engineering Fracture Mechanics, 93, 153-167.
Ameri, M., Nowbakht, S., Molayem, M., & Aliha, M. R. M. (2016). Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes. Fatigue & fracture of engineering materials & structures, 39(7), 896-906.
Arabi, H., Mirsayar, M. M., Samaei, A. T., & Darandeh, M. (2013). Study of characteristic equation of the elastic stress field near bimaterial notches. Strength of Materials, 45(5), 598-606.
Awaji, H., & Sato. S. (1978). Combined mode fracture toughness measurement by the disc test. Journal of Engineering Materials and Technology, 100, 175–182.
Ayatollahi, M. R., Mirsayar, M. M., & Nejati, M. (2010a). Evaluation of first non-singular stress term in bi-material notches. Computational Materials Science, 50(2), 752-760.
Ayatollahi, M. R., Nejati, M., & Mirsayar, M. M. (2010b). An overdeterministic method for stress analysis of bi-material corners and interface cracks using finite element method. In Proceedings of the 9th Conference of Iranian Aerospace Society, Tehran, Iran.
Ayatollahi, M. R., & Mirsayar, M. M. (2011). Kinking angles for interface cracks. Procedia Engineering, 10, 325-329.
Ayatollahi, M. R., Mirsayar, M. M., & Dehghany, M. (2011). Experimental determination of stress field parameters in bi-material notches using photoelasticity. Materials & Design, 32(10), 4901-4908.
Ayatollahi, M.R., Aliha, M.R.M., & Hasani, M.M. (2006). Mixed mode brittle fracture in PMMA – an experimental study using SCB specimens. Materials Science and Engineering A, 417(12), 348–356.
Ayatollahi, M. R., Dehghany, M., & Mirsayar, M. M. (2013). A comprehensive photoelastic study for mode I sharp V-notches. European Journal of Mechanics-A/Solids, 37, 216-230.
Bahmani, A., Aliha, M. R. M., & Berto, F. (2017). Investigation of fracture toughness for a polycrystalline graphite under combined tensile-tear deformation. Theoretical and Applied Fracture Mechanics. https://doi.org/10.1016/j.tafmec.2017.02.011
Chandra Kishen, J.M., & Singh, K.D. (2001). Stress intensity factors based fracture criteria for kinking and branching of interface crack: application to dams. Engineering Fracture Mechanics, 68(2), 201-219.
Charalambides, P. G., Lund, J., Evans, A. G., & McMeeking, R. M. (1989). A test specimen for determining the fracture resistance of bimaterial interfaces. Journal of Applied Mechanics, 56(1), 77-82.
Chaudhuri, R.A., & Chiu, S.H.J. (2007). Three-dimensional asymptotic stress field at the front of an unsymmetric bimaterial wedge associated with matrix cracking or fiber break. Composite Structures, 78(2), 254–263.
Choupani, N. (2008). Mixed-mode cohesive fracture of adhesive joints: experimental and numerical studies. Engineering fracture mechanics, 75(15), 4363-4382.
Dehghany, M., Saeidi Googarchin, H., & Aliha, M. R. M. (2017). The role of first non‐singular stress terms in mixed mode brittle fracture of V‐notched components: an experimental study. Fatigue & Fracture of Engineering Materials & Structures, 40(4), 623-641.
Dunn, M. L., Cunningham, S. J., & Labossiere, P. E. (2000). Initiation toughness of silicon/glass anodic bonds. Acta Materialia, 48(3), 735-744.
Erdogan, F., & Sih, G. C. (1963). On the crack extension in plates under plane loading and transverse shear. Journal of Basic Engineering, 85, 525–527.
Evans, A. G., Dalgleish, B. J., He, M., & Hutchinson, J. W. (1989). On crack path selection and the interface fracture energy in bimaterial systems. Acta Metallurgica, 37(12), 3249-3254.
Fakhri, M., Amoosoltani, E., & Aliha, M. R. M. (2017). Crack behavior analysis of roller compacted concrete mixtures containing reclaimed asphalt pavement and crumb rubber. Engineering Fracture Mechanics, 180, 43-59.
Fett, T., Gerteisen, G., Hahnenberger, S., Martin, G., & Munz, D. (1995). Fracture tests for ceramics under mode-I, mode-II and mixed-mode loading. Journal of the European Ceramic Society, 15, 307–312.
Heidari-Rarani, M., Aliha, M. R. M., Shokrieh, M. M., & Ayatollahi, M. R. (2014). Mechanical durability of an optimized polymer concrete under various thermal cyclic loadings–An experimental study. Construction and Building Materials, 64, 308-315.
Lazzarin, P., & Zambardi, R. (2001). A finite-volume-energy based approach to predict the static and fatigue behavior of components with sharp V-shaped notches. International journal of fracture, 112(3), 275-298.
Li, X., & Marasteanu, M. O. (2005). Cohesive modeling of fracture in asphalt mixtures at low temperatures. International Journal of Fracture, 136, 285–308.
Lim, I.L., Johnston, I.W., Choi, S.K., & Boland, J.N. (1994). Fracture testing of a soft rock with semi-circular specimens under three-point bending, part 2 – mixed mode. International Journal of Rrock Mechanics and Mining Sciences and Geomechanics Abstracts, 31(3),199–212.
Maiti, S. K., & Smith, R. A. (1983). Comparison of the criteria for mixed mode brittle fracture based on the preinstability stress-strain field Part I: Slit and elliptical cracks under uniaxial tensile loading. International Journal of Fracture, 23(4), 281-295.
Miehe, C., Hofacker, M., Schaenzel, L. M., & Aldakheel, F. (2015). Phase field modeling of fracture in multi-physics problems. Part II. Coupled brittle-to-ductile failure criteria and crack propagation in thermo-elastic–plastic solids. Computer Methods in Applied Mechanics and Engineering, 294, 486-522.
Mirlohi, S., & Aliha, M. (2013). Crack growth path prediction for the angled cracked plate using higher order terms of Williams series expansion. Engineering Solid Mechanics, 1(3), 77-84.
Mirsayar, M. (2013). Calculation of stress intensity factors for an interfacial notch of a bi-material joint using photoelasticity. Engineering Solid Mechanics, 1(4), 149-153.
Mirsayar, M., & Samaei, A. (2013). Photoelastic study of bi-material notches: Effect of mismatch parameters. Engineering Solid Mechanics, 1(1), 21-26.
Mirsayar, M. M. (2014a). On fracture of kinked interface cracks–the role of T-stress. Materials and Design, 61, 117-123.
Mirsayar, M. (2014b). A new mixed mode fracture test specimen covering positive and negative values of T-stress. Engineering Solid Mechanics, 2(2), 67-72.
Mirsayar, M. (2014c). A modified maximum tangential stress criterion for determination of the fracture toughness in bi-material notches–Part 1: Theory. Engineering Solid Mechanics, 2(4), 277-282.
Mirsayar, M., & Samaei, A. (2014). Application of maximum tangential stress criterion in determination of fracture initiation angles of silicon/glass anodic bonds. Engineering Solid Mechanics, 2(3), 145-150.
Mirsayar, M.M., Aliha, M.R.M., & Samaei, A.T. (2014). On fracture initiation angle near bi-material notches – Effect of first non-singular stress term, Engineering Fracture Mechanics, 119, 124 -131.
Mirsayar, M. M. (2015a). Mixed mode fracture analysis using extended maximum tangential strain criterion. Materials & Design, 86, 941-947.
Mirsayar, M. M. (2015b). Three dimensional investigation of mode I stress intensity factor variations in crack front using finite element method. American Journal of Engineering and Applied Sciences, 8(1), 11.
Mirsayar, M. M., & Park. P. (2015). The role of T-stress on kinking angle of interface cracks. Materials and Design, 80, 12-19.
Mirsayar, M., & Samaei, A. (2015). A finite element study on the fracture initiation at the zirconia/veneer interface: An application in dental materials. Engineering Solid Mechanics, 3(4), 207-214.
Mirsayar, M. M., & Park, P. (2016a). Modified maximum tangential stress criterion for fracture behavior of zirconia/veneer interfaces. Journal of the mechanical behavior of biomedical materials, 59, 236-240.
Mirsayar, M. M., & Park, P. (2016b). Mixed mode brittle fracture analysis of high strength cement mortar using strain-based criteria. Theoretical and Applied Fracture Mechanics, 86, 233-238.
Mirsayar, M. M., Berto, F., Aliha, M. R. M., & Park, P. (2016a). Strain-based criteria for mixed-mode fracture of polycrystalline graphite. Engineering Fracture Mechanics, 156, 114-123.
Mirsayar, M. M., Huang, K., & Zollinger, D. G. (2016b). New approach to determining concrete slab lift-off by use of interfacial fracture mechanics concepts. Transportation Research Record: Journal of the Transportation Research Board, 2590, 10-17.
Mirsayar, M., & Takabi, B. (2016). Fracture of underwater notched structures. Engineering Solid Mechanics, 4(2), 43-52.
Mirsayar, M.M. (2017). On fracture analysis of dental restorative materials under combined tensile-shear loading, Theoretical and Applied Fracture Mechanics, doi: http://dx.doi.org/10.1016/j.tafmec. 2017.07.020
Mirsayar, M. M., Joneidi, V. A., Petrescu, R. V. V., Petrescu, F. I. T., & Berto, F. (2017a). Extended MTSN criterion for fracture analysis of soda lime glass. Engineering Fracture Mechanics, 178, 50-59.
Mirsayar, M. M., Razmi, A., & Berto, F. (2017b). Tangential strain‐based criteria for mixed‐mode I/II fracture toughness of cement concrete. Fatigue & Fracture of Engineering Materials & Structures.
Mousavi, A., & Aliha, M. (2016). Determination of fracture parameters for a bi-material center cracked plate subjected to biaxial loading using FEOD method. Engineering Solid Mechanics, 4(3), 117-124.
Razavi, S. M. J., Aliha, M. R. M., & Berto, F. (2017). Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens. Theoretical and Applied Fracture Mechanics.
Razmi, A., & Mirsayar, M. M. (2017). On the mixed mode I/II fracture properties of jute fiber-reinforced concrete. Construction and Building Materials, 148, 512-520.
Roberts, F. L., Kandhal, P. S., Brown, E. R., Lee, D. Y., & Kennedy, T. W. (1996). Hot mix asphalt materials, mixture design and construction.
Sih, G. C., & Macdonald, B. (1974). Fracture mechanics applied to engineering problems-strain energy density fracture criterion. Engineering Fracture Mechanics, 6(2), 361-386.
Suresh, S., Shih, C.F., Morrone, A., & O-Dowd, N.P. (1990). Mixed-mode fracture toughness of ceramic materials. Journal of the American Ceramic Society, 73(5), 1257–1267.
Theocaris, P.S. (1984). A higher-order approximation for the T criterion of fracture in biaxial fields. Engineering Fracture Mechanics, 19, 975–991.
Wang, H. T., Wang, G. Z., Xuan, F. Z., & Tu, S. T. (2013). An experimental investigation of local fracture resistance and crack growth paths in a dissimilar metal welded joint. Materials and Design, 44, 179-189.
Williams, J.G., & Ewing, P.D. (1972). Fracture under complex stress – the angled crack problem. International Journal of Fracture, 8, 441–446.
Xeidakis, G.S., Samaras, I.S., Zacharopoulos, D.A., & Papakalitakis, G.E. (1996). Crack growth in a mixed-mode loading on marble beams under three point bending. International Journal of Fracture, 79, 197–208.
Yang, Y.Q., Dudek, H.J., & Kumpfert, J. (1998). Interfacial reaction and stability of SCS-6 SiC/Ti–25Al–10NB–3V–1MO composites. Material Science and Engineering A, 246(1-2), 213–220.