In the present work, a multi-response optimization method is used to optimize the machining parameters in turning of glass fiber reinforced polymer (GFRP) composites. Parameters like spindle speed (N), feed rate (f) and depth of cut (d) are taken to obtain the responses such as surface roughness (Ra) and material removal rate (MRR). Taguchi’s L9 orthogonal array has been used for machining the work-piece. Analysis of variance (ANOVA) has been carried out to check the significant process parameter in a single objective performance characteristic. The multiple performance characteristics have been analysed using Grey relational analysis and an appreciable result has been reported with this approach.

The objective of this paper is to optimize the process parameters by combined approach of VIKOR and Entropy weight measurement method during Electrical discharge machining (EDM) process of Al-18wt.%SiCp metal matrix composite (MMC). The central composite design (CCD) method is considered to evaluate the effect of three process parameters; namely pulse on time (Ton), peak current (Ip) and flushing pressure (Fp) on the responses like material removal rate (MRR), tool wear rate (TWR), Radial over cut (ROC) and surface roughness (Ra). The Entropy weight measurement method evaluates the individual weights of each response and, using VIKOR method, the multi-objective responses are optimized to get a single numerical index known as VIKOR Index. Then the Analysis of Variance (ANOVA) technique is used to determine the significance of the process parameters on the VIKOR Index. Finally, the result of the VIKOR Indexed is validated by conformation test using the liner mathematical model equation develop by responses surface methodology to identify the effectiveness of the proposed method.