Cutouts are commonly used as access port for mechanical and electrical structures. Most of the structures generally work under severe dynamic loading and different constrained conditions during their service life. This may lead to vibration of the structure. Therefore, it is necessary to predict the vibration responses of laminated composite plates with cutouts precisely with less computational cost and good accuracy of these complex structures. A suitable finite element model is proposed and developed based on first order shear deformation theory using ANSYS parametric design language (APDL) code. The model has been discretized using an appropriate eight nodded element (SHELL 281) from the ANSYS element library. The free vibrations are computed using Block-Lanczos algorithm. The convergence study has been done of the developed model and compared with those available published literature. Effects of different geometric parameters (aspect ratio, thickness ratio, boundary conditions, number of layers, angle of lamina geometry of cutout, cutout side to plate side ratio and distance between cutouts) and material properties on the free vibration responses are discussed in detail. The frequency increases with increase in the number of layers, modulus ratio of plate and angle of lamina. The frequency decreases with increase in aspect ratio, thickness ratio, size of cutout and distance between cutouts. The boundary conditions of the plate play an important role in the free vibrations of the plate with cutouts. The Non-dimensional frequencies are higher for fully clamped boundary condition in comparison to other boundary conditions.

Finite element method is used to study the free vibration analysis of functionally graded skew plates. The material properties of the skew plates are assumed to vary continuously through their thickness according to a power-law distribution of the volume fractions of the plate constituents. The first order shear deformation theory is used to incorporate the effects of transverse shear deformation and rotary inertia. Convergence study with respect to the number of nodes has been carried out and the results are compared with those from past investigations available in the literature. Two types of functionally graded skew plates - Al/ZrO2 and Al/Al2O3 are considered in this study and the effects of the volume fraction, different external boundary conditions and thickness ratio on the natural frequencies are studied in detail.