A flat Aluminum specimen with a geometric discontinuity, which allows testing of the applicability of 2D and 3D Digital Image Correlation Strain measurements, has been considered for this research since it is prone to high stress concentration via Addis Ababa Institute of Technology research interest. Experimental strain using digital image correlation and geometry measurements should be measured with estimated material properties and compare the results with theoretical model predictions. Aluminum plate with central hole were subjected for far field stress in the Machine shop of School of Mechanical and Industrial Engineering at Addis Ababa University in order to test the agreement between DIC’s strain analysis, strain gauge strain analysis and calculated empirical formulas of strain analysis and for the stress distribution of the plate elastically deformed by using VIC-3D and strain gauge. The aim is to measure vertical strain field, Vertical strain along horizontal line through hole center as function of applied loading and vertical strain using theoretical formula along same line as measurements in a plate with central hole subjected to far field and near field tensile loading using visual image coloration (VIC-3D) software, Destensometere device and solid mechanics equations to compare strain results.